SL-160 Digital Portable Hardness Tester Meter Durometer Leeb Hardness Tester for Metal Steel

Model:SL-160

Data output: YES

Printer:YES

1.Based on the principle of measuring the Leeb hardness, it can be measured in a variety of metal materials.

2.Easily switch to the hardness of all formats (HL,HB,HRB,HRC,HRA,HV,HS), parallel conversion of the measured value of the hardness

3.Using the big screen 128 x 64 graphics dot matrix LCD display, information is rich, intuitive.

4.With bright backlight display, easy to use in the light gray environment.

5.A host can be equipped with 7 kinds of different impact device, automatic identification of impact device type. No need to re calibrate the replacement.

1.Installed mechanical or permanent assembly parts.

2.Heavy work piece.

3.Invalidation analysis of pressure vessel, steam turbine generator set and its equipment.

4.Test space is very narrow artifacts

5.Bearings and other parts.

6.Requires a formal original record of the test results.

7.Material distinction of metal materials.

8.Rapid test of multiple measurement sites in large scale workpiece.

Working temperature: -10℃~+55℃;

Storage temperature: -20℃~+75℃;

The relative humidity is less than 90%;

There is no vibration, no strong magnetic field, no corrosive medium and serious dust in the surrounding environment.

Part No.

SL-160

Hardness Scale

Richter(HL), Brinell (HB), Rockwell B / C (HRB / C), Rockwell A (HRA), the Victoria's (HV), Shaw (HS)

Measuring Range

(170-960) HLD, (17.9-69.5) HRC, (19-651) HB, (80-1042) HV (30.6-102.6) HS

Measuring Direction

Universal 360 degree

Display

Dot matrix LCD, 128* 64 graphic dot, with backlight

Memory

500 groups data can be stored and re-readable

Paper width

 (57.5 ± 0.5) mm

Print Roll Diameter

30mm

Operating voltage

6V NiMH battery pack

Charging power supply

9V/500mA

Charging time

2.5 to 3.5 hours

Continuous working 

about 150 hours

Operating temperature

-10 ~ +50 °C

Storage Temperature

-30 °C ~ +60 °C

Relative Humidity

≤ 90%