Wholesale PVC Flood Barrier Inflatable Oil Water Flood Barrier Rubber Dams Barriers

Steps for usage

1.LAY OUT/ ROLL OUT
Place the dam elements in the target location. Loosen the straps. Roll out the dam elements.

2.INFLATE
Inflate the dam elements with a special air blower. Max. low pressure of 0.1 bar. This air blower will be supplied by Geoline Ltd.

3.CONNECT ELEMENTS
Connect the dam elements with the ratchet straps after letting out some air. Attach the straps in such a way that they sag slightly. Move the dam into the required position. Do not drag it over the ground!

4.FILL WITH WATER
Connect to a water pump and fill with water whilst letting air out at the same time. Fill both tubes at the same time. Use flood water to fill tubes where possible.

5.DURING FILLING
Make sure that the tubes do not roll away. On an inclined surface the elements lying side by side should be filled with water at the same time.

6.REMOVE AIR
Let the air out from the openings at the top. The dam elements should adopt an oval shape in the process.

7.CLOSE THE CAPS
When the dam element is half full, leave the air escape cap open until water starts to escape. Close the cap.Carefully observe the filling process and immediately stop when the filling pressure is reached.

8.CHECK FILLING PRESSURE
Max. internal water pressure 0.2 bar. Checking the filling pressure: Hold up the filling hose and take off the air escape cap. The height of the resulting water fountain must not exceed 0.5m.

Pls Click Above Picture to Get More

Main Prtoducts

Custom All Kinds of  Inflatable Flood Barrier

We have many style inflatable flood dam and others,what's more,OEM could be accepted, pls send us the picture of tent style you like, then we can produce it for you.  

Guangzhou Shao Xiong Toys Co., Limited is one of the best inflatable manufacturers in China. Founded in 2007, which specializes in inflatable production management and design for about 10 years.
During this 10 years, Shao Xiong absorbs a lot of high technology from developped countries, and set up its own style.
Now we are having advanced management system and integral equipment available. We have professional design department, cutting department, sewing department and quality control department for the inflatable toys.

Our advantage :
1. Direct factory, high quality and affordable price.
2. High resolution digital printings can be provided as required.
3. Competitive price, qulity assurance, high efficiency.
4. Considerate pre-sales and after sales services.
5. Strict quality control
6. Warranty: 2-3 years