Home > Products > Biomass Pellet Production Line > Biomass Sawdust Straw Forage Pellet Machine for Animal Feed Processing

Share|

Biomass Sawdust Straw Forage Pellet Machine for Animal Feed Processing

Name: Biomass Sawdust Straw Forage Pellet Machine for Animal Feed Processing
Price: Negotiable

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment Terms:T/T Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Description

Biomass Energy Plant Widely Used Wood Pellet Production Line

Capacity	1-5ton/h
Power	135-500kw
Application Area	wood, wood chip
Introduction	Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th.

Biomass energy is second only to coal, oil and natural gas one of the world's total energy consumption 4th.According to experts predict that biomass energy is likely to become an important part of the future sustainable energy system, at the middle of this century, using new technology to produce all kinds of biomass alternative fuels will account for more than 40% of total global fuel consumption. Because the biomass as fuels has no contamination, and other significant characteristics of renewable, thus it increasingly brought to the attention of the countries.

With the continuous development of world economy, energy shortage problem is increasingly serious, in order to solve the energy crisis, reduce environmental pollution, protect the ecological environment, the development and utilization of biomass energy is particularly important. The comprehensive utilization of biomass energy has been increasingly valued, biomass pellet fuel production equipment has been further development.In the use of biomass energy, because of the wood powder, straw, wood chips, sawdust, the shells with high moisture content, if the raw material direct combustion, thermal efficiency is very low, incomplete combustion and gasification of water take away a large number of high temperature thermal energy, the wet material burning will produce a large amount of smoke, this will increase environmental protection costs. International general biomass utilization method is biomass after crushing, drying and dewatering, removal ash, high pressure molding, moisture to 12-15%, heat 4000-4800 kcal/kg, ash content of 1% or less, made into energy pellet fuel, high efficient used.

Product Introduction

High humidity materials forming experts zhengzhou Dingli company according to the market demand, company targeted development of material pellet fuel production line equipment, this production line applicable to the wood chips, sawdust, bamboo shavings, wood shavings, barley straw, oat straw, wheat straw, rye, straw, rice straw, sorghum straw, corn stalks, stem drying potato vines, beans, peanut vine and other moisture content 35-65% materials drying and molding.The pellet machine using die roll extrusion principle, the agriculture residues biomass raw materials processed into solid molding fuel, this will realize to continuous and stable production of industrialization. Processing route use one time drying, secondary crushing, continuous feeding and adjust feeding mixed process combining ,the particle shaping fuel rate of 98%, bulk density and particle density are high. High-quality high-tech products not only occupy the domestic market (including Taiwan, Hong Kong, Macao), but also export More than 20 countries, such as America,Germany,England,India and so on.Our company has more than 300 strategic cooperation partners in the global.Our company has obtained ISO9000, 14001 and CE product certifications. Large capacity , high efficiency and energy saving, security, environmental protection, cover an area of an area small,etc get customers’ praise.

Complete Biomss Pellet Production Line consists of heater, feeding machine, rotary drum, discharging machine, induced draft fan, unloading feeder, cyclone, odor removal equipment and power distribution cabinet.

Product Application

Biomass Pellet Production Line is is used for various of material, such as wood powder, straw, wood chips, sawdust, corn straw, wheat straw, rice straw, cotton straw, peanut shell, branch, saw powder, bagasse, sunflower seed shell, bamboo shavings, wood shavings, barley straw, oat straw, rye, straw, sorghum straw, corn stalks, stem drying potato vines, beans, peanut vine,etc.

Main Features

1.Patent technology (patent no. : ZL200920089749.2), single equipment the kinds are variety, application to a variety of materials, modular structures, optimize configurations, ensure production lines broad applicability.

2.According to customer's requirements to realize intelligent control, a key "fool" type operation.

3.More than 300 users in the world, our factory has the rich practical experience.

4.The cover area reduce 50% than the traditional drying granulating production line , civil investment reduce about 50%.

5.waste gas discharge temperature is lower than 50 ℃, low energy consumption.

6.Particle shaping fuel rate of 98%, bulk density and high density.

7.Special design ash control technology, ash content lower than 1%.

8.Modular dust collecting and purifying heat recycling configuration, safe and protect environmental.

9.This type mixing drum dryer is supporting many new type energy-saving hot air stove,energy consumption drop about 30%,power consumption reduce 20%,lower operation costs.

10.Internet sharing system, it can ensure that the personalized production lines , accessories and unit efficient distributions in place.

Working Principle

Technical Parameters

Model	DLKL1000	DLKL1500	DLKL2000	DLKL3000	DLKL5000
Capacity(t/h)	0.8-1.0	1.2-1.5	1.5-2.0	2.5-3.0	4.5-5.0
Motor Power(KW)	135	175	210	255	300
Weight(T)	45	47	55	68	73
Plant Area(m)	10m*24m	10m*24m	10m*24m	12m*26m	12m*26m
Except above models, we also can supply special model according to your requirements.

Packaging & Shipping & Service

Packaging & Shipping

Your equipment will be well tested before leaving the factory and will be well packaged for long distance ground and sea transport without damage.

Our Services Items

Pre-sale 1. According to your needs, select right model for you. 2. According to your special requirements, design customized solution and manufacture customized products for you. 3. Welcome your visit. Sale 1. Sign contract, pay deposit, we arrange production. 2. Product acceptance. 3. Help you formulate construction scheme. After-sale 1. Assign engineer service for you on-site freely. 2. Install and adjust device, train how to operate. 3. After installation, leaving 1-2 technical staff to help you on-site production, until achieve customer satisfaction.

About Dingli Group

Our DingLi Group company was founded in 2005,is currently compose of Zhengzhou Dingli New Energy Technology Co., Ltd, Zhengzhou Drying Technology Co., Ltd, Zhengzhou Jiutian Machinery Co., Ltd and Zhengzhou Engineering Technology Research Center, which was the only innovative and comprehensive enterprise with research, design, manufacture, sales and service in the domestic drying industry. Group owns 8 series equipment such as the dehydration series, drying series, thermal series, crushing series, granulating series, conveying series, environmental protection series and electric control equipment, besides we own more than 150 kinds of high-tech products.

Dingli Group Honors

The certificates that we have got, such as CE, ISO, SGS and so on.

Buyer & Project Case

Customers Visiting

More than 300 customers from Southeast Asia, Central Asia, Eastern Europe, Africa and South America have visited our company.The communication is very smooth, and most of the customers are very satisfied with the solutions and services we provide.

Project Cases

Our equipment has exported to over 80 countries, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.

FAQ

Q1: What's your business model? Trading company or factory?

A: We are a 15 years factory, all our machinery are manufactured by ourselves, factory direct sales, product quality and
after-sales service can be guarantee.
Q2: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train. The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO. We will pick you up at airport. Welcome to visit our factory.
Q3: What is the Quality of your products?
A: Dingli Group products come with best quality, and our products passed CE certification, exported to lots countries around the word, such as Australia, Malaysia, India, Italy ,Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.
Q4: Do you provide after-sale service?
A: Yes. The warranty period of our machines is one year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.

Contact Information

Welcome To Contact Us

If you are interested in our equipments, or have any questions, please don't hesitate to contact us.

Contact Us

Zhengzhou Dingli New Energy Technology Co., Ltd.

New Products

Flash Dryer	Ungrouped	Stamping type Biomass Briquette Machine	Sand Washer
Sand Mineral Dryer	Promotional Products	Organic Fertilizer Production Line	Manure Dryer
Main Products	Hydraulic Pallet Production Line	Food Waste Dryer	Active Products
Feed Dryer	Dehydrator	Coconut & Palm Dryer	Coal Dryer
Charcoal Machine	Biomass Pellet Production Line	Biomass Dryer	Biomass Briquetting Machine
Biomass & Feed Pellet Mill