Energy Saving Jute Stick Wood Briquettes Charcoal Powder Coconut Shell Carbonize Stove Charcoal Making Machine

Energy Saving Jute Stick Wood Briquettes Charcoal Powder Coconut Shell Carbonize Stove Charcoal Making Machine

What is the Air flow Carbonization stove?

Trees in the forest, abandoned coconuts in the coconut garden, waste bamboo in the bamboo forest, wood briquettes made with a wood briquette machine, after charring, charcoal is obtained, which is used for burning or grilling, or processed into other charcoal products.

What is the purpose of the machine?

1.Bbq or Burning

2.Making other charcoal products to sell:

* charcoal press ball machine to make charcoal balls -can make different size and shapes ball 

*charcoal powder extruder to make charcoal briquettes-can make different size and length charcoal briquettes 

How to operate the Air flow Carbonization stove?

1.First, we open the sealing lid and set the basket aside. Then we can put in raw materials (such as wood logs, wood bricks, wood chips, coconut shells or macadamia shells). If the ingredients are granular (such as coconut shell or macadamia shell). We should first empty the cylinder into the basket. Because there should be enough space inside to ensure complete carbonization

2.We then installed the basket and placed it in the main charcoal stove using a lifting tool. We should also put the lid on and seal the connection with sand or earth. After completing these preparations, we started to use the fuel material to heat the bottom of the stove. As the temperature rises, some smoke will be emitted from the exhaust port when the basket temperature reaches a high temperature (different raw materials will have different temperatures). When the smoke color turns pale yellow, immediately connect the exhaust pipe to allow the flue gas to return to the stove. At the same time, heating by fuel is stopped. Material (log or shell) during carbonization.

3.When the temperature reaches 450 degrees, heating should be stopped and carbonization should be completed. Then disconnect the connection. Remove the basket from the main furnace (the sealing lid cannot be opened) and let the material cool itself. When the temperature is about 50 degrees, we can open the sealing lid and remove the charcoal. The other two furnaces can be operated as described above.

SPECIFICATIONS FOR QHL-1

What are the advantages of Air flow Carbonization stove?

1. High carbonization rate and high output 
2. Energy-saving ( 1000kg charcoal just need 30kg firewood or 15kg liquid gas for heating)
3. No smoke and less pollution (we have two important systems that can recycle and purify the flue gas and flue gas, 95% of which will be used to heat the stove again, and the heating resource can use liquefied gas, so it will not pollute Please refer to the following information for brief introduction.

4. Easy to load and unload (We will provide you with some steel baskets for loading wood and keep the charcoal beautiful.

5. Easy to transport and save a lot of transportation costs (the internal stove can be stacked together when loading, Save nearly 50% of space, can save a lot of money) 6, suitable for a variety of raw materials, especially coconut shells, palm stands, logs, wood branches, bamboo, etc.

7. Continuous working for 24 hours, high productivity.

Clients'feedback about Air flow Carbonization stove

Case 1:Indonesia coconut charcoal air flow carbonization stove project

Case 2:Thailand wood briquettes charcoal project

Our machines are exported all over the world, we understand our customers' local markets, and we will make you successful.

Contact me now!