sawdust carbonization oven/bamboo powder charcoal making kiln/olive seeds charcoal carbonizing furnace

Introduction of the sawdust carbonization oven:

This is our new desin in our factory, it can directy carbonize the small size like the sawdust, biomass. The sawdust inside the stove is carbonized under the condition of little oxygen, the charring tempreture can reach 450degree centigrad.

Raw material can be used for the wood sawdust charcoal carbonziation kiln:

All sorts of agro-forest waste, such as wood log, wasted wood, old furnature, tree branch, crop stalk, etc.

Size required:1-5mm sawdust

Moisture of raw material:8-12%

If the raw material is larger than 1-5mm, please pre-crush it first,  if the crushed raw material is wet, dry it to 8-12% moisture content. We supply the whole production line.

Working principle of the sawdust carbonization oven:

Firstly, use the sieve to screen sawdust with different size to eliminate bigger impurity. 

Then, dry the sieved sawdust if the moisture content is larger than 8%-12%. 

Finally, put the raw material into the sawdust carbonization stove to charring it. The raw material will be carbonized four times in the stove, for there are four tubes equiped with the stove, as the follow picture:

Features of the sawdust carbonization oven:

1) heating parts:

includes three heating room (for heating the stove), furnace body and heat keeping layer (it is made of the heat insulating material, used for keep the heating) and the drought fan.when the temperature reach to 250-300degree, just stop to heating and feed the raw material.

2) carbonizing parts:

consist of four carbonizing tubes, Both of them are made of the heat resistance thermal steel, under the drive of the machine, the sawdust will be delivery to the tube 1, when the sawdust reach to the end of the tube 1,it will turn around to the tube 2, and so on, after four tubes carbonization, the sawdust will become charcoal powder.

3) gas recycle part:

when during the process of carbonizing, there will be some smoke.( can be burning) the smoke can return to the furnace through tube for purifying, after purification , the gas recycle tubes can be flow into the heating room of the main furnace for heating the machine again.

4) Smoking purification parts:

in this carbonization machine, there are two purification tank, the first one to purify the smoking ( can not burning ), and the other one are used to purification the gas smoking when the working process, The smoking through the purification system will become water vapor, and it will not pollute the air.

5) cooling parts:

in the back side of the machine, there is one tube for cooling the hot charcoal powder, so we can get the charcoal powder directly.

6) controlling parts:

the whole wood sawdust carbonization machine we will equip one electrical control box to control the three electrical motors.

Using the charcoal to do next produce:

Crush the charcoal to small size charcoal powder; Using the mixer machine to mix the charcoal powder, water and binder together; Then make the briquette.

A: make the charcoal stick briquette:

B: make the charcoal ball briquette:

C: make the shisha charcoal briquette:

Gongyi xiaoyi Mingyang Machinery Plant is located in Zhengzhou City,which is the biggest manufacturing base of charcoal making machinery. And we are the one of the earliest and largest manufacturers of renewable fuel & energy equipment and related machinery. After 15 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. Our products are widely accepted in both domestic and world markets, and also are exported to more than 30 countries. We have lots of experience to export and cooperate with all over the world, and we also sincerely welcome you to come to our factory to visit and watch our products and factory.

We have many kinds of certifications, famous in domestic and overseas, such as ISO Approved, CE Approved, SGS, BV and other certifications in our country. Such as Alibaba certifications, Made-in China, etc. You can find our factory and watch our products in many websites, We win in the strength, win in the quality and win in the service. This is why our clients choose us.

We insist on "Quality is the soul of company", we own outstanding R&D team with the sense of innovation and cooperation.
Our professional service includes: Free training, Guidance Installation and Debugging.

Guaranteed Time: One Year (Calculated from the goods arrived the destination port.)

1. Pre-sale service: according to your special needs, design and manufacture products for you, provide you with project design, process design, purchase program.

2. On sale: accompany you to check the performance of the machine.

3. After-sale service: we will send engineers to install the equipments to put them into use as soon as possible, commissioning and training operators on site.

If there is any doubts about our machines, please feel free to contact me or clike send to me directly.

Sales Manager: Ms. Bella Ren

Phone: 008615039052281

Whatsapp: 008615039052281

Wechat: 008615039052281

Skype: bella616919