Home > Products > Fixed pitch wind turbine > Bergey type 30kw Wind generator
Bergey type 30kw Wind generator
- 1000 per Month
- T/T Credit Card
Product Description
Commercial FD12-30KW wind turbine 500V Grid tie system, low price, high return,high efficiency, low noise
FD12-30kw KW WIND TURBINE MAIN BODY: US$9200.00/set.
( Including 3 pcs blades, nose cone, hub, generator, manual brake system, nacelle, tail rod, tail vane.)
PWM controller with dump load, inverter, tower price will provided seperately.
User can take whole system from us, also can take any part of the system from us.
1. 30kw Wind turbine model selection
Horizontal axis, directly drive, fixed pitch, auto furling wind turbine, FD12-30kw, FD14-30kw.
Permanent magnet generator, 3 phase AC
3 pcs FRB blades, high efficiency, low noise
FD14-30kw wind turbine work in low average wind speed place lower than 6.5m/s;
FD12-30kw wind turbine work in normal average wind speed place 6.5m/s-8m/s.
New designed 30kw wind turbine, pitch controlled, auto eletric controlled by controller, tailless new model work in rich wind speed place.
2. 30kw Wind turbine spec
Horizontal axis, directly drive, fixed blades pitch/pitch controlled, upwind wind wind turbine
For farm, small village use
FD14-30kw wind turbine work in low average wind speed place;
FD12-30kw wind turbine work in rich average wind speed place;
14m blades rotor wind turbine, rated wind speed is 9-10m/s. suitable for the lower average wind speed.
Model: | FD12-30kw |
Rotor Diameter: | 12m |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 12m/s |
Rated rotate speed: | 170r/min |
Rated output power: | 30kw |
Max output power: | 40kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phrase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag |
Working voltage: | DC240V/DC600V, can be special request |
Tower height: |
15m( including 2 pcs tower, work plate, ladder, base plate, ground screw) |
Wind turbine main body weight: | 1500kg |
Life span: | 15-20 years; |
Warranty: | 3 years after installation |
FD14-30kw fixed pitch wind turbine normal spec:
Model: | FD14-30kw |
Rotor Diameter: | 14m |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 10m/s |
Rated rotate speed: | 140r/min |
Rated output power: | 30kw |
Max output power: | 36kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phrase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag |
Working voltage: | DC240V/DC600V, can be special request |
Tower height: |
15m( including 2 pcs tower, work plate, ladder, base plate, ground screw) |
Wind turbine main body weight: | 1700kg |
Life span: | 15-20 years; |
Warranty: | 3 years after installation |
Wind turbine Generator and nacelle
3. 30kw wind turbine Output power data
30KW wind turbine output power data(FD14) | |||
Wind speed (m/s) | Rotation speed (R/m) | Working voltage (V) | Power (kw) |
3 | 36 | 150 | 0.891 |
4 | 48 | 200 | 2.112 |
5 | 60 | 250 | 4.125 |
6 | 72 | 300 | 7.128 |
7 | 84 | 350 | 11.319 |
8 | 96 | 400 | 16.896 |
9 | 108 | 450 | 24.057 |
10 | 120 | 500 | 31.5 |
11 | 132 | 550 | 32 |
12 | 144 | 600 | 33 |
13 | 150 | 600 | 34 |
14 | 152 | 600 | 35 |
15 | 154 | 600 | 36 |
16 | 156 | 600 | 36 |
17 | 158 | 600 | 36 |
18 | 160 | 600 | 36 |
19 | 162 | 600 | 36 |
20 | 164 | 600 | 36 |
4. Wind turbine freatures
1. Blade: Manufacturing according to the airscrew structure principle and techniques. |
Optimal wide TSR & High L/D ratio. With protection film on the edge, long work life. |
Select blade type by wind tunnel testing. |
With high efficiency, low noise. |
2. Blades rotor: Hub adopts casting molding; Blades rotor and generator adopt universal connection, directly driven. |
Connection is reliable, durable, smooth operation without vibration. |
3. Generator |
Rotor: Nd-Fe-B permanent magnet. Prefabricated tangential magnetic circuit rotor; High magnetic flux density, small |
cubage, good manufacturing process and high performance. |
Adopt SKF, NSK bearing. |
Close transmission slip ring, the cable will not enlace. |
4. Speed regulation: yaw. Simple, reliable and safety. |
5. Anti-corrosion treatment: All the outside parts are designed to anti-salt, anti-fog, anti-atmospheric |
anti-sandstorm corrosion design. |
6.Tower: guy wire tower, tilting up tower, standalone tower, hydraulic tower… It can be designed according to your request. |
7. 300w-2.5kw auto braking; 3kw-30kw auto braking system and manual braking system. |
8. Wind turbine design principle is simple, safety, reliable, maintenance free. |
9. Provide low wind place, rich wind place solution. Wind turbine OEM service. |
5. Working system
Wind turbine on grid system: wind turbine with tower + PWM on grid controller with dump load + grid tie inverter
Wind turbine off grid working system:
wind turbine with tower + PWM off grid charge controller with dump + battery group + inverter;
Wind solar hybrid off grid system, diesel or grid power as backup power
6. 30kw fixed pitch wind turbine advantage
Fixed pitch wind turbine including: 3 pcs blades, nose cone, hub, generator with manual brake part, nacelle, tail rod, tail vane
- Low/normal average wind speed wind turbine
- Fixed pitch,auto yaw, auto brake, manual brake protection system.
- Low cost, reliable and steady working system
- Low start up wind speed 3m/s, low rated wind speed 9m/s;(FD14-30kw)
- Low noise level, provide noise drawing chart
- High efficiency 3 phrase AC permanent magnet generator
- Vacuum mould blades with protection film, long worklife span in sand wind condition
- Wind turbine with antiseptic treatment, hot-galvanize tower. It can be work in sea side, island, lake...
- stand alone tower is easy to installation for sample order; Hydraulic tower is easy to install for bulk order.
- We provide completely on grid system kit
Home, farm, signal station, island, garden...
8. Blades,pma
Vacuum mould blades with protection film
C.W blades, low noise level, high efficiency
FRB material, 3 pcs blades per set
Adjust blades rotor balance before delivery
Iron cast housing made by losting mould. Beautiful and antirust. Rare earth material, high efficiency and low start up torque
9. Tower type: stand lone tower, hydraulic tower (optional)
Tower height can be manufacture according to user's request.
The tower with hot-galvanize.
We provided the tower foundation drawing after confirm the tower type, tower height.
10. Matched controller
Power of the equipped wind turbine (W) |
30K |
Operating mode |
Continuous |
Function |
Commutation, control |
Operating environment |
Temperature -30~60℃, humidity≤80% |
PWM unloading voltage (DCV) |
≥500V |
three-phase dump load 1 voltage (DCV) |
525±5V |
three-phase dump load 2 voltage (DCV) |
530±5V |
three-phase dump load 2 delay time (min) |
10-20 minutes |
Low voltage indicator (V) |
≤130V |
Self-provided connecting wire of the three-phase dump load 1(mm²) |
>12mm² |
Self-provided connecting wire of the three-phase dump load 2 (mm²) |
>12mm² |
Self-provided connecting wire of the PWM dump load(mm²) |
>12mm² |
PWM unloading fuse (A) |
63A |
DC output fuse (A) |
100A |
Controller converts 3 phase AC power to Dc and charge to the battery group or feed to the grid tie inverter.
Controller with auto brake function, PWM voltage stablization function.
Matched with off grid single phrase/ 3 phrase pure sine wave inverter.
On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter.
11.Inverter for on/off grid system:
Matched (3 phase )grid tie inverter 15k*2 sets, add isolation transformer between two grid tie inverter. pure sine wave inverter single phrase/ 3 phase
Inverter output voltage, frequency can be manufactured according to different countries request.
Model |
BNWA-1KD |
BNWA- 2KD |
BNWA-3KD |
BNWA-5KD |
BNWA-10KD |
BNWA-20KD |
BNWA-30KD |
BNWA-50KD |
Rating capacity |
1KVA |
2KVA |
3KVA |
5KVA |
10KVA |
20KVA |
30KVA |
50KVA |
Rating AC output power |
1KVA |
2KVA |
3KVA |
5KVA |
10KVA |
20KVA |
30KVA |
50KVA |
Max. AC output power |
1.2KVA |
2.4KVA |
3.6KVA |
6KVA |
12KVA |
24KVA |
36KVA |
60KVA |
Isolation |
Low frequency transformer isolation |
|||||||
Recommending wind turbine power |
1.2KVA |
2.4KVA |
3.6KVA |
6KVA |
12KVA |
24KVA |
36KVA |
60KVA |
DC input voltage range |
50~780VDC |
100~780VDC |
150~780VDC |
200~780VDC |
||||
Max. DC Input current |
20A |
20A |
20A |
25A |
50A |
100A |
150A |
250A |
DC connecting mode |
In-line waterproof terminal |
Connecting terminal |
||||||
Max. Efficiency |
94% |
|||||||
Euro efficiency |
92% |
|||||||
Total current waveform distortion factor |
<3%(liner load) |
|||||||
Comm. interfaces |
RS485/RS232 |
|||||||
electrical insulating performance |
1500Vac,1minute |
|||||||
Using environment temperature |
-25~+60℃ |
|||||||
Using environment humidity |
0~100% |
|||||||
Protection |
Input short voltage,over voltage,opposing connection, output over current,short circuit,over heat etc |
|||||||
Cooling method |
Air cooling |
|||||||
Noise |
<40dB |
<55dB |
||||||
Protection class |
IP20(indoor)),IP65(outdoor) |
|||||||
Width ×depth ×height(mm) |
200*420*400 |
225*480*450 |
550*480*980 |
800*600*2260 |
||||
Weight(kg) |
18 |
30 |
40 |
60 |
150 |
250 |
360 |
700 |
Other fixed pitch wind turbine model list:
Model | Working voltage |
FD2.2-300W | DC24V |
FD2.5-500W | DC24V |
FD2.8-1KW | DC24V/DC48V |
FD3.2-1.5kw | DC24V/DC48V |
FD3.2-2KW | DC24V/DC48V |
FD3.8-2.5kw | DC48V |
FD4-3KW | DC48v |
FD4-4KW | DC120v |
FD5-5KW | DC120v |
FD8-10KW | DC120V |
FD8-15kw | DC240 |
FD10-15KW | DC240V |
FD10-20KW | DC500V |
FD10-25KW | DC500V |
FD12-30KW | DC500V |
FD2.8-500W | DC24V |
FD3.2-1KW | DC24V/DC48V |
FD3.8-2KW | DC24V/DC48V |
FD6-5KW | DC120V |
FD10-10KW | DC120V |
FD12-20KW | DC500 |
plywood case/soft packages
Delivery by sea. FOB/C&F, CIF
Delivery via LCL, 40' CONTAINER
Normally we delivery the products by sea. If you need us check the delivery cost, pls let us know the destination port to you. Then we will check the delivery cost accordingly.
FD14-30k Packing details | ||||||
TTL:7 packages | ||||||
Model | Packing size | G.W (kg) | Cubage (M3) | Q'ty | Remark | |
30kw WTG main body |
6.8*0.85*0.55 | 542 | 3.18 | 1 | Blades | plywood case |
0.76*0.76*0.9 | 39 | 0.52 | 1 | Nose cone and back cover | plywood case | |
2.13*1.15*0.71 | 1085 | 1.74 | 1 | Main body and hub | plywood case | |
2.06*1.26*0.26 | 144 | 0.67 | 1 | Tail vane,pin | plywood case | |
3.3*0.54*0.14 | 93 | 0.25 | 1 | tail rod | soft package | |
control system | 0.88*0.56*1.9 | 153 | 0.9 | 1 | controller | plywood case |
0.8*0.6*0.95 | 94 | 0.46 | 1 | dump load | plywood case | |
TTL: | 2150 | 7.72 | 7 |
Provide professional wind turbine technical support;
Provide on/off grid system design, wind solar hybrid system design service.
Completely system provider and designer;
Wind turbine type, model, capacity selection professional support;
Tower design, foundation drawing support;
Provide Pma, hub, flange drawing;
Provide OEM service, customized service.
Support paypal /west union payment, TT payment;
We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now.
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
1. Wind turbine model selection
It depends your local annual average wind speed, daily/monthly home power consumption.
Low average wind speed place, select larger blades rotor, higher rated working voltage;
Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.
The safety and steady working system is the first choice.
2. Wind turbine tower selection
Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower.
Guy wire tower cost is lower, easy to delivery. But the installation area is larger;
Tilting up tower is for 500w-5kw wind turbine. Easy installation, small installation area. But the delivery cost is higher.
Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.
Stand alone tower for the installation place with crane.
The tower height: Make sure blades rotor is higher than wind turbine surrounding barrier height.
3. Working system selection
On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;
Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;
Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.
Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s.
For more question, pls contact with us directly. We will give you a professional response.
Why select us:
We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.
I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request.
In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.
Contact Us
- Qingdao HenryD Wind Power Equipment Co., Ltd.
Battery, inverter, controller,tower | Blades, pma | Fixed pitch wind turbine | Roller |
Tail control wind turbine | Ungrouped | Variable pitch wind turbine | Vertical axis wind turbine |
- 2000w wind generator with 24v 30v 36v 48v 56v 60v 72v 96v
- AELOS wind turbine 3kw
- Horizontal axis wind turbine 20kw with on grid system kit
- 3kw windturbine kit
- Horizontal type 5KW Wind Turbine generator
- 2.5KW wind turbine generator with 24v 48v 96v 120v 240v 300v 360v 380v 450v 500v
- 300w 500w 750w 1kw 1.6kw wind generator
- Domestic wind turbine 4kw
- 2kw Home wind generator for wind solar hybrid system
- 15kw Wind Power Generator for farm
- 60KW Wind turbine generator set
- 1000w wind generator for house
- 20KW wind turbine generator system
- 5kw Wind generator on grid system with 220vac 380vac 5kw grid tie inverter
- 1kw wind turbine for 24v 48v 96v 120v 220v 240v solar power system
- Custom 5kw Wind Turbine for different wind place
- 2kw Wind Turbine with 24v 48v 56v 60v 72v 96v 120v 192v 220v 240v 280v 360v 380v 450v
- 6kw wind turbine with 6m blades rotor
Popular Searches
Find Similar Products By Category
- Packaging & Printing > Packaging Bags
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-