Home > Products > Fixed pitch wind turbine > MPPT intelligent wind generator 20kw
MPPT intelligent wind generator 20kw
- 1000 per Month
- T/T Credit Card
Product Description
High efficiency, low RPM 20kw wind generator 3 phase grid tie system, windmill permanent magnet generator
FD10-20kw KW WIND TURBINE MAIN BODY: US$7200.00/set.
( Including 3 pcs blades, nose cone, hub, generator, manual brake system, nacelle, tail rod, tail vane.)
PWM controller with dump load, inverter, tower price will provided seperately.
User can take whole system from us, also can take any part of the system from us.
1. 20kw Wind turbine model selection
Horizontal axis, directly drive, fixed pitch, auto furling wind turbine, FD10-20kw, FD12-20kw.
Permanent magnet generator, 3 phase AC
3 pcs FRB blades, high efficiency, low noise
FD12-20kw wind turbine work in low average wind speed place lower than 6.5m/s;
FD10-20kw wind turbine work in normal average wind speed place 6.5m/s-8m/s.
New designed 20kw wind turbine, pitch controlled, auto eletric controlled by controller, tailless new model work in rich wind speed place.
2. 20kw Wind turbine spec
Model: | FD12-20kw |
Rotor Diameter: | 12m/s |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 10m/s |
Rated rotate speed: | 160r/min |
Rated output power: | 20kw |
Max output power: | 30kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phrase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag,controller auto brake protection |
Working voltage: | DC240v-DC500V, optional |
Tower height: | 15m-30m or special request |
Wind turbine main body weight: | 1700kg |
Measurement(CBM): | 6.5CBM (wind turbine main body and controller) |
Life span: | 20 years; |
Warranty: | 3 years |
Working system: | on/off grid working system |
10m,12m blades rotor diameter optional
directly drive, hotizontal axis
3 pcs FRB blades with protection film
PWM on grid controller with dump load + Aurora power one grid tie inverter
500v working system
Stand alone tower, hydraulic tower, lattice tower (provide foundation drawing)
Model: | FD10-20kw |
Rotor Diameter: | 10m |
Number of Blades: | 3pcs |
Material of Blades: | Fibre glass expoxy |
Cut-in wind speed: | 3m/s |
Working wind speed: | 4-30m/s |
Survival wind speed: | 50m/s |
Rated wind speed: | 12m/s |
Rated rotate speed: | 170r/min |
Rated output power: | 20kw |
Max output power: | 30kw |
Type of tower: | Manganese steel independence tower |
Type of generator: | Permanent-magnet 3 phrase AC |
Speed regulation method: | Yaw |
Stop method: | Brake by hand drag,controller auto brake protection |
Working voltage: | DC240v-DC500V, optional |
Tower height: | 15m or special request |
Wind turbine main body weight: | 1700kg |
Measurement(CBM): | 6.1CBM (wind turbine main body and controller) |
Life span: | 20 years; |
Warranty: | 3 years |
Working system: | on/off grid working system |
3. Output power data
Power w | wind speed(m/s) | Rotation speed(r/min) |
working voltage(V) | Output power(W) |
20000 | 3 | 57 | 158 | 773 |
4 | 83 | 207 | 1259 | |
5 | 103 | 235 | 3751 | |
6 | 124 | 290 | 7057 | |
7 | 141 | 338 | 12794 | |
8 | 158 | 367 | 15985 | |
9 | 172 | 419 | 19027 | |
10 | 191 | 490 | 21037 | |
11 | 209 | 520 | 22797 | |
12 | 220 | 550 | 23610 | |
13 | 235 | 575 | 25194 | |
14 | 249 | 590 | 26440 | |
15 | 268 | 600 | 27940 | |
16 | 268 | 600 | 27940 | |
17 | 268 | 600 | 27940 | |
18 | 268 | 600 | 27940 | |
19 | 268 | 600 | 27940 | |
20 | 268 | 600 | 27940 |
4. Wind turbine freatures
1. Blade: Manufacturing according to the airscrew structure principle and techniques. |
Optimal wide TSR & High L/D ratio. With protection film on the edge, long work life. |
Select blade type by wind tunnel testing. |
With high efficiency, low noise. |
2. Blades rotor: Hub adopts casting molding; Blades rotor and generator adopt universal connection, directly driven. |
Connection is reliable, durable, smooth operation without vibration. |
3. Generator |
Rotor: Nd-Fe-B permanent magnet. Prefabricated tangential magnetic circuit rotor; High magnetic flux density, small |
cubage, good manufacturing process and high performance. |
Adopt SKF, NSK bearing. |
Close transmission slip ring, the cable will not enlace. |
4. Speed regulation: yaw. Simple, reliable and safety. |
5. Anti-corrosion treatment: All the outside parts are designed to anti-salt, anti-fog, anti-atmospheric |
anti-sandstorm corrosion design. |
6.Tower: guy wire tower, tilting up tower, standalone tower, hydraulic tower… It can be designed according to your request. |
7. 300w-2.5kw auto braking; 3kw-30kw auto braking system and manual braking system. |
8. Wind turbine design principle is simple, safety, reliable, maintenance free. |
9. Provide low wind place, rich wind place solution. Wind turbine OEM service. |
5. Working system
Wind turbine on grid system: wind turbine with tower + PWM on grid controller with dump load + grid tie inverter
Wind turbine off grid working system:
wind turbine with tower + PWM off grid charge controller with dump + battery group + inverter;
Wind solar hybrid off grid system, diesel or grid power as backup power
6. Application
Home, farm, signal station, island, garden...
7. Blades,pma
Vacuum mould blades with protection film
C.W blades, low noise level, high efficiency
FRB material, 3 pcs blades per set
Adjust blades rotor balance before delivery
Iron cast housing made by losting mould. Beautiful and antirust. Rare earth material, high efficiency and low start up torque
8. Tower type: stand lone tower, hydraulic tower (optional)
Tower height can be manufacture according to user's request.
The tower with hot-galvanize.
We provided the tower foundation drawing after confirm the tower type, tower height.
9. Matched controller
20kw PWM off grid charge controller with dump load:
Type |
26KW-360Vdc |
Wind turbine rated power |
20KW |
Wind turbine max. power |
40KW |
Solar panel power |
6KW |
Battery |
360Vdc |
Function |
Rectifier,charge, control |
Display mode |
LCD |
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
PWM constant pressure voltage |
>420Vdc |
3-phase load voltage of the wind turbine |
435±5Vdc |
Recovery charging voltage of the wind turbine |
405±5Vdc |
Solar controller stop charging voltage |
435±5Vdc |
Solar restore charge voltage |
405±5Vdc |
Low-voltage of the battery |
300±5Vdc |
Self-provided connecting wire of the battery |
>12mm² |
PWM fuse |
40A |
Solar fuse |
20A |
Charging fuse |
80A |
Work environment temperature |
-30-60°C |
Relative humidity |
<90% No condensation |
Noise (1m) |
<40dB |
Degree of protection |
IP20(Indoor) |
Cooling method |
Forced air cooling |
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
Size of the controller |
560*460*950 mm |
Weight of the controller |
53 Kg |
Size of the load |
810*580*980mm |
Weight of the load |
77Kg |
20kw PWM on grid controller with dump load
Power of the equipped wind turbine (W) |
20K |
Operating mode |
Continuous |
Function |
Commutation, control |
Operating environment |
Temperature -30~60℃, humidity≤80% |
PWM unloading voltage (DCV) |
≥600V |
three-phase dump load 1 voltage (DCV) |
630±5V |
three-phase dump load 2 voltage (DCV) |
650±5V |
three-phase dump load 2 delay time (min) |
10-20 minutes |
Low voltage indicator (V) |
≤130V |
Self-provided connecting wire of the three-phase dump load 1(mm²) |
>6mm² |
Self-provided connecting wire of the three-phase dump load 2 (mm²) |
>6mm² |
Self-provided connecting wire of the PWM dump load(mm²) |
>6mm² |
PWM unloading fuse (A) |
40A |
DC output fuse (A) |
63A |
Controller converts 3 phase AC power to Dc and charge to the battery group or feed to the grid tie inverter.
Controller with auto brake function, PWM voltage stablization function.
Matched with off grid single phrase/ 3 phrase pure sine wave inverter.
On grid system grid tie inverter ABB power one inverter, our provided grid tie inverter.
10.Inverter for on/off grid system:
Model |
BNWA-1KD |
BNWA- 2KD |
BNWA-3KD |
BNWA-5KD |
BNWA-10KD |
BNWA-20KD |
BNWA-30KD |
BNWA-50KD |
Rating capacity |
1KVA |
2KVA |
3KVA |
5KVA |
10KVA |
20KVA |
30KVA |
50KVA |
Rating AC output power |
1KVA |
2KVA |
3KVA |
5KVA |
10KVA |
20KVA |
30KVA |
50KVA |
Max. AC output power |
1.2KVA |
2.4KVA |
3.6KVA |
6KVA |
12KVA |
24KVA |
36KVA |
60KVA |
Isolation |
Low frequency transformer isolation |
|||||||
Recommending wind turbine power |
1.2KVA |
2.4KVA |
3.6KVA |
6KVA |
12KVA |
24KVA |
36KVA |
60KVA |
DC input voltage range |
50~780VDC |
100~780VDC |
150~780VDC |
200~780VDC |
||||
Max. DC Input current |
20A |
20A |
20A |
25A |
50A |
100A |
150A |
250A |
DC connecting mode |
In-line waterproof terminal |
Connecting terminal |
||||||
Max. Efficiency |
94% |
|||||||
Euro efficiency |
92% |
|||||||
Total current waveform distortion factor |
<3%(liner load) |
|||||||
Comm. interfaces |
RS485/RS232 |
|||||||
electrical insulating performance |
1500Vac,1minute |
|||||||
Using environment temperature |
-25~+60℃ |
|||||||
Using environment humidity |
0~100% |
|||||||
Protection |
Input short voltage,over voltage,opposing connection,output over current,short circuit,over heat etc |
|||||||
Cooling method |
Air cooling |
|||||||
Noise |
<40dB |
<55dB |
||||||
Protection class |
IP20(indoor)),IP65(outdoor) |
|||||||
Width ×depth ×height(mm) |
200*420*400 |
225*480*450 |
550*480*980 |
800*600*2260 |
||||
Weight(kg) |
18 |
30 |
40 |
60 |
150 |
250 |
360 |
700 |
Matched (3 phase )grid tie inverter 20kw. pure sine wave inverter single phrase/ 3 phase
Matched 1 Inverter Trio-20.0-TL-OUTD-W
Inverter output voltage, frequency can be manufactured according to different countries request.
Wind turbine main body, blades, pma, tail, controller, inverter: plywood case
Tower: soft packages
Delivery by sea
FOB/C&F, CIF
500w-3kw wind turbine : 3-5 working days after payment
5kw-30kw wind turbine: 7-10 working days after payment
50kw-60kw 15-20 days after payment
Tower needs about 10 working days after payment
20kw WTG packing list | |||||
Item | Description | Packing | G.W(Kg) | ||
Packing method | outside size(m) | ||||
1 | Hub,nose cone and under cover | plywood box | 0.55 | 150 | |
2 | Generator/rotor body | plywood box | 1.77 | 890 | |
3 | Blades | plywood box | 2.09 | 390 | |
4 | Tail vane | Tail vane plate | plywood box | 0.85 | 255 |
Tail vane frame | |||||
Giant-shaped steel & others | |||||
5 | Tail rod | soft package | 0.25 | 75 | |
6. | On grid controller | carton | 0.10 | 30 | |
grid tie inverter | plywood case | 0.15 | 40 | ||
7. | Unload box | carton | 0.46 | 77 | |
TTL: | 6.23cbm | 1907 |
Provide professional wind turbine technical support;
Provide on/off grid system design, wind solar hybrid system design service.
Completely system provider and designer;
Wind turbine type, model, capacity selection professional support;
Tower design, foundation drawing support;
Provide Pma, hub, flange drawing;
Provide OEM service, customized service.
Support paypal /west union payment, TT payment;
We started to manufacture wind turbine in 1994. In 2004, there are only 4 small wind turbine manufactures in China. We keep improving and develop in the small wind turbine field. We are not the leading small wind turbine exporter, but we are the leading wind turbine manufacture and designer now.
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
1. Wind turbine model selection
It depends your local annual average wind speed, daily/monthly home power consumption.
Low average wind speed place, select larger blades rotor, higher rated working voltage;
Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.
The safety and steady working system is the first choice.
2. Wind turbine tower selection
Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower.
Guy wire tower cost is lower, easy to delivery. But the installation area is larger;
Tilting up tower is for 500w-5kw wind turbine. Easy installation, small installation area. But the delivery cost is higher.
Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.
Stand alone tower for the installation place with crane.
The tower height: Make sure blades rotor is higher than wind turbine surrounding barrier height.
3. Working system selection
On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;
Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;
Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.
Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s.
For more question, pls contact with us directly. We will give you a professional response.
Why select us:
We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.
I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request.
In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.
Contact Us
- Qingdao HenryD Wind Power Equipment Co., Ltd.
Battery, inverter, controller,tower | Blades, pma | Fixed pitch wind turbine | Roller |
Tail control wind turbine | Ungrouped | Variable pitch wind turbine | Vertical axis wind turbine |
- Germany 30KW Wind Generator with 12m or 14m rotor
- Sweden wind turbine 500w
- eolico generator 2kw
- 2kw wind electrical generator
- Romania wind turbine 5kw
- 3kw low noise wind generator with 3.5kw wind power grid tie inverter
- Norway 5kw wind generator with EMC and CE certification
- 3kw wind turbine for Poland market
- low wind place generador eolico 25kw
- 1000w eolienne with 350rpm or 430rpm pma
- Low wind place generador eolico 30kw
- Wind generator 30kw with 240v 380v 415v on grid system kit
Popular Searches
Find Similar Products By Category
- Packaging & Printing > Packaging Bags
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-