Variable pitch and electric yaw wind turbine 20kw

 Huaya 20kw pitch controlled wind turbine adopts:

Passive electric pitch controlled, tailless wind turbine. Controller will test the rotation speed,output voltage,current... Once the rotation speed/voltage/current is too higher, it will push the blades angle twist and change itself aerodynamic characteristic to control wind turbine rotation speed, till the blades direction same with the wind direction and stop working. This will make the generator output power steady and constantly. 

1.  pitch controlled wind turbine features

Inner structure:  

Anemometer supply the information of wind speed wind direction to PLC 

PLC sends pitch / yawing / brake signal 

Electric drive pusher for variable pitch 

Worm wheel for yawing 

Brake motor for electric brake 

Generator: 

Type: Asynchronous permanent magnet 3 phrase alternator

Rating: 20KW,180rpm, 500VDC

Generator:Permanent magnet (Nd-Fe-B) 38SH

Certificate:CE

Superior grade bearings (NSK,SKF), long-term grease, run 30000 hours without maintenance

Advantage: electric pitch control

Blade:  

Technology : via foaming 

Material : Fiberglass reinforced polyester 

Special paint for wind turbine blade 

Protective film 

acumme infusion technology, without bubble, high strength , light weight 

Blade position sensor for pitch control 

Tower: 

Provide 15m-30m stand alone tower with accessory (ladder, base plate, work plate, cable and 4 kinds of wires ...).  

Tower surface  hot-galvanize 

Provide the tower foundation drawing 

Tower is soft packages when delivery. 

SIEMENS PLC auto Programmable PWM controller with dump load,with remote monitor and control,data transmission function

Anemometer:

Inverter for on/off grid system: 

2. D-12m blades rotor, PLC controlled wind turbine 20 kw 

- MODEL: FD12- 20KW wind turbine 

- rotor diameter 12m 

- electric pitch control , electric yawing 

- Siemens PLC , hydraulic disk brake 

- gearless, direct drive, 3 phase ac perament magnet 

- NSK bearing 

 - brushless yawing brushless motor, pitch control brushless motor  

- RS 485 communication, GPRS telecommunication , CPU intelligent control 

Wind turbine main body, blades, pma, controller, inverter: plywood case

Tower: soft packages

20kw variable pitch wind turbine main body with hub:  3.26*0.81*1.11m, 1688kgs

20kw blades:   6.03*0.83*0.49m   580kgs

20kw controller with dump load: 

0.83*0.56*1.9m  185kgs

0.68*0.52*0.47   42kgs

Delivery by sea, by air

FOB/C&F, CIF

Manufacture leading time:15 working days after payment 

 Provide professional technical support;

Provide system design;

Wind turbine type, model, capacity selection professional support;

Tower design, foundation design support;

Completely system provider and designer;

 We manufacture 300w-30kw fixed pitch wind turbine;

2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;

On grid system/off grid system, wind solar hybrid system; Water heating system;

For more details, pls contact with us via e-mail.

Thanks!

• 1. Wind turbine model selection

It depends your local annual average wind speed, daily/monthly home power consumption. 

Low average wind speed place, select larger blades rotor, higher rated working voltage;

Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.

The safety and steady working system is the first choice. 

2. Wind turbine tower selection

Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower. 

Guy wire tower cost is lower, easy to delivery. But the installation area is larger;

Tilting up tower is for 500w-5kw wind turbine.  Easy installation, small installation area. But the delivery cost is higher. 

Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher. 

Stand alone tower for the installation place with crane. 

The tower height:  Make sure blades rotor is higher than wind turbine surrounding barrier height. 

3. Working system selection

On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter;

Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter;

Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system.

Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s. 

For more question, pls contact with us directly.  We will give you a professional response. 

Why select us:

We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition.

I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request. 

In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.