Home > Products > Variable pitch wind turbine > variable speed pitch regulated wind turbine 2kw
variable speed pitch regulated wind turbine 2kw
- 1000 per Month
- T/T Credit Card
Product Description
HENRYD! variable speed pitch regulated wind turbine 2kw type HAWT
Advantages:
- Blades rotor: Blades rotor efficiency can reach 0.42. Noise level is less than 65db, and balance adjustment has been carried out strictly before leaving factory.
- Generator: Blades rotor drives directly. Lower rotation speed, PMG synchronous generator, over load capacity is 150%.
- Pitch controlled wind turbine: Adopt stable pitch controlled system, can be used in variable environments
- Low failure rate
- Speed regulates Performance: The precision of pitch controlled system is 10 r/min, and never over speed at gale. Low Start up Wind Speed: According to different wind conditions, adjust the blade initial angle to make wind turbine start up at low wind speed.
- The start-up wind speed is ≤3m/s.
- Manual brake: Reliable braking system, easy to operate, can stop wind turbine at any time.
- Automatically undo cable: slip rings undo the cable automatically. Ensure the cable has not twist. Double carbon brushes structure make sure power transfer without failure.
- Well-adapted Wind turbine: The operation wind speed is 3-30m/s.
Specification:
Blades rotor Diameter (m) |
3.2 |
Material and number of the blades |
FRB 3 PCS |
Rated power / max power (w) |
2k/3k |
Rated wind speed (m/s) |
9 |
Startup wind speed (m/s) |
3 |
Working wind speed (m/s) |
3-25 |
Start up torque(N.m) |
1.4 |
Survived wind speed (m/s) |
40 |
Rated rotation speed (r/min) |
380 |
Working Voltage (V) |
DC24--300v |
Generator style |
3 phase ,AC PMG |
Speed regulation method |
centrifugal pitch control, yaw |
Stop method |
Brake by hand drag + electromagnet brake |
Working system |
Off-grid working system/ |
Guy wire tower Height |
8m,9m,10m,12m,15m |
Tilting up Tower height |
8m,9m,10m,12m,15m |
Wind turbine output power curve:
Wind turbine main body assembly:
Generator with manual brake system, nacelle, variable pitch hub, nose cone
FRB blades with protection film
Perfect design:
Working system:
Wind (solar hybrid) on grid system
Wind (solar hybrid) off grid working system
Home and Abroad Applications:
System Relaed Products :
Power of the equipped wind turbine (W) |
2K |
Operating mode |
Continuous |
Function |
Commutation, control |
Operating environment |
Temperature -30~60℃, humidity≤80% |
PWM unloading voltage (DCV) |
≥350V |
brake voltage (DCV) |
380±5V |
brake delay time (min) |
10-20 minutes |
Low voltage indicator (V) |
≤130V |
Self-provided connecting wire of the brake (mm²) |
>2.5mm² |
Self-provided connecting wire of the PWM dump load(mm²) |
>2.5mm² |
PWM unloading fuse (A) |
10A |
DC output fuse (A) |
10A |
Type |
2KW-24Vdc |
2KW-48Vdc |
2KW-96Vdc |
Wind turbine rated power |
2KW |
2KW |
2KW |
Wind turbine max. power |
4KW |
4KW |
4KW |
Solar panel |
600Wp |
600Wp |
600Wp |
Battery |
24Vdc |
48Vdc |
96Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
WTG Voltage, WTG current, WTG power, solar voltage, solar current, solar power, battery voltage, charge current |
||
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>110Vdc |
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Recovery charging voltage of the wind turbine |
27±1Vdc |
54±1Vdc |
108±2Vdc |
Solar stop charge voltage |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Solar recovery charging voltage |
<28Vdc |
<56Vdc |
<110Vdc |
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
80±2Vdc |
Self-provided connecting wire of the battery |
>20mm² |
>10mm² |
>24mm² |
PWM fuse |
100A |
40A |
20A |
Solar fuse |
40A |
20A |
10A |
Charging fuse |
125A |
63A |
32A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller (mm) |
480*360*23 |
480*360*230 |
480*360*230 |
Weight of the controller |
23 Kg |
16 Kg |
16 Kg |
Size of the load (mm) |
490*460*310 |
490*460*310 |
490*460*310 |
Weight of the load |
15.5 Kg |
15.5 Kg |
15.5Kg |
The DC Max voltage |
600Vdc |
The DC range |
30V~540Vdc |
The rating max DC input current |
20Adc |
The rating grid voltage |
230Vac or 240Vac |
The grid voltage range |
180~270Vac (adjustable) |
Operation phase |
single |
Rating grid output current |
13.0Aac/12.5Aac |
Rating output power |
3.0KW |
Grid current THD |
Total THd<4%, |
The DC injection current |
<20mA |
Output power factor |
>0.99 |
Grid frequency range |
47.0~52.0Hz /57.0~62.0Hz(adjustable) |
Max efficiency |
>96.5% |
Design lifetime |
>20 years |
Operation environment temperature |
25~60 |
Pitch Control Wind Turbine Technical Parameters | |||||||
Item | FD3.8-2kw | FD4-3kw | FD5.4-5kw | FD10-10kw | FD12-20kw | FD14-30kw | FD23-50kw |
Rotor diameter(m) | 3.8 | 4 | 5.4 | 10 | 12 | 14 | 23 |
Blade material | Reinforced FPR | Reinforced FPR | Reinforced FPR | ||||
Blade quantity | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Rated wind speed (m/s) |
9 | 10 | 10 | 10 | 10 | 9 | 9 |
Start-up wind speed(m/s) | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
Working wind speed (m/s) |
3.0-25 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 | 3.0-35 |
Security wind speed (m/s) |
40 | 40 | 45 | 45 | 50 | 50 | 50 |
Starting torque(n/m) | 1.4 | 2.5 | 4.5 | 7.5 | 14 | 20 | 110 |
Speed adjusting mode | Centrifugal Pitch Control | Active Pitch Control, Active Yawing | |||||
Stop method | Electromagnetic + Manual brake | Feathering,Yawing,Electromagnetic | |||||
Generator type | Permanent Magnet Three phase AC generator | ||||||
Rated power | 2KW | 3KW | 5KW | 10KW | 20KW | 30KW | 50KW |
Maximum power | 3KW | 4KW | 6KW | 12KW | 25KW | 35KW | 60KW |
Rated RPM(r/min) | 380 | 300 | 240 | 180 | 150 | 140 | 60 |
Working voltage | DC24V-500V | DC48V-500V | DC48V-500V | DC120V-500V | DC240V-500V | DC500V | DC700V |
Wind turbine weight (kg) |
130 | 160 | 260 | 1000 | 2500 | 2800 | 6580 |
Packing and Shipping:
Products Name | Q'ty | Packing size(m) | G.W(kg) | Cubage(m3) | Q'ty | Remark |
2kw variable pitch generator, nacelle, hub,nose cone,manual brake |
1 | 1.36*0.78*0.74 | 375 | 0.78 | 1 | plywood case |
Blades and tail | 1 | 1.93*0.3*0.25 | 44 | 0.14 | 1 | |
419 | 0.92 | 2 |
We manufacture 300w-30kw fixed pitch wind turbine;
2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw, 60kw pitch controlled wind turbine;
1kw, 2kw, 3kw, 5kw Vertical axis wind turbine;
On grid system/off grid system, wind solar hybrid system; Water heating system;
For more details, pls contact with us via e-mail.
Thanks!
Certificates and wind turbine test report:
Our Factory:
1. Wind tubine model selection
Pls check your local place average wind speed,then we will provide recommend model for you.
Low average wind speed place can select larger bldes rotor, higher tower, higher voltage wind turbine;
Rich wind place can select normal blades rotor diameter. Speed limited system.
2. Working system
If you local place has grid power, you can select:
off grid system +grid power hybrid system; Wind solar off grid sysem + grid power hybid system;
On grid system;
If there is no grid power, you can select wnd tubine off grid system + backup power hybid ystem;
Wind solar off grid system + backup power hybrid system.
3. Tower selection:
The blades rotor bottom tip should be higher than max surrounding barrier.
For more details, pls contact with us.
Contact Us
- Qingdao HenryD Wind Power Equipment Co., Ltd.
Battery, inverter, controller,tower | Blades, pma | Fixed pitch wind turbine | Roller |
Tail control wind turbine | Ungrouped | Variable pitch wind turbine | Vertical axis wind turbine |
- FD3.5-2kw variable pitch wind turbine
- 7.5kw marine wind turbine kit
- Pitch controlled downwind wind turbine 10kw
- 20kw 20kva Domestic Wind Turbine Manufacturer
- Variable pitch controlled windmill 30kw
- Horizontal axis eolica eolienne 50kw
- 5000w Generadores Eolicos - Aerogeneradores
- SIEMENS PLC control Wind turbine generator 30kw with best wind turbine price
- 5kw 7.5kw 10kw pitch controlled wind turbine generator
- 7.5kw Pitch controlled wind generator with 6m blades rotor
- Speed regulated Turbina eoliana 2kw
- Horizontale Eolienne 20kw with on grid system kit
Popular Searches
Find Similar Products By Category
- Packaging & Printing > Packaging Bags
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-