Hot Selling Virgin PC ABS Flame Retardant Grade V0 Resin Plastic Raw Material PC ABS Granules

Product Description

PC (Polycarbonate) is almost colorless glassy amorphous polymer with good optical properties. PC high molecular weight resin has high toughness, cantilever notch impact strength of 600~900J/m, unfilled grade thermal deformation temperature of about 130°C, glass fiber reinforced can increase this value by 10°C. PC bending modulus can reach more than 2400MPa, resin can be processed into large rigid products. Below 100°C, the creep rate under load is very low. PC has poor hydrolysis resistance and cannot be used to repeatedly withstand high pressure steam products.

Detailed Photos

Application

PC engineering plastic three application fields are glass assembly industry, automotive industry and electronics, electrical industry, followed by industrial machinery parts, OPTICAL disc, packaging, computer and other office equipment, medical and health care, film, leisure and protective equipment.PC can be used as Windows and doors glass, PC laminate is widely used in banks, embassies, detention and public places of the protective window, used in aircraft cover, lighting equipment, industrial safety baffle and bulletproof glass.

1. Mechanical properties: high strength and elastic coefficient, high impact strength, good fatigue resistance, good dimensional stability, little creep (little change under high temperature conditions), high transparency and free dyeing;
2. Heat aging: wide range of temperature, enhanced UL temperature index up to 120~140ºC (outdoor long-term aging is also very good);
3. Solvent resistance: no stress cracking;
4. Water stability: it is easy to decompose when meeting water at high temperature (caution should be used in high temperature and high humidity environment);
5. Insulation performance: excellent (humidity, high temperature can also maintain stable electrical performance, is the manufacture of electronic, electrical parts of the ideal material);
6. Dielectric coefficient: 3.0-3.2;
7. Arc resistance: 120S;
8. Molding processability: injection molding or extrusion of ordinary equipment.

Product Parameters

Packing & Shipping

FAQ

1. Are youtrading company or Manufacturer ?
We are factory.

2.About Sample
We provide samples, but you need to pay the sample fee and freight.

3. About Material
We can customize the material according to customers' requirement.

4. About Quality
All the products must be tested strictly according to the testing procedure before shipment.

5. About Delivery Period
Normally delivered in 21 working days after the confirmation of order& payment. And it varies according to the material and
quantity.

6. About Payment term
It's flexible, T/T, L/C at sight,100% in advance,30% in advance, the balance by copy B/L.