Home > Products > Gate Valve > Factory Wholesale Stem Gate Valve Mechanical Sluice Valve
Factory Wholesale Stem Gate Valve Mechanical Sluice Valve
- 4000 Ton / Tons per Month
- Shanghai
- T/T L/C
- 15 days
Product Details
Brand Name: | ZW | Place of Origin: | China | Material: | Casting |
Application: | General | Structure: | Gate | Standard or Nonstandard: | Standard |
Pressure: | Medium Pressure | Power: | Manual | Port Size: | Dn50-800 |
Media: | Base | Temperature of Media: | Low Temperature |
Product Description
Non-rising stem gate valve is one type of gate valve with flexible wedge as its on-off disc, which moving direction is perpendicular with flow. Non-Rising Stem means outside stem, also referred to as the rotary stem gate valve or blind stem wedge gate valve. In an NRS valve, the stem will turn to open and close the gate, but the stem does not move up or down as it turns. Gate valve can be only full open or full close. They are widely used in series of industries, especially in water supply projects, public works, water treatment plant, fire fighting, etc. Prosper Flow can manufacture resilient seated gate valve according to the standard of DIN3202 F4/F5/BS5163 with sizes of 2″~32″ (DN50~800mm).
1. FEATURES· Full bore design
· Self cleaning & low pressure loss
· Rolled stem ensure smooth thread edges and double thread
· Low operating torque
· Good and clear body marking (Castings are from the same foundry with AVK Valve and Spain TALIS)
· Online replaceable under full pressure with valve fully opened; Three o-rings protects upper stem from impurities entering from the water way
· Every valve be 100% tested and qualified before packing and delivery
2. STANDARD· Design & manufacturing: EN1171/1074/DIN3202-F4/ F5/BS5163
· Face to face: EN558-1 series 3,14,15
· Flanged ends: ISO7005-2, EN1092-2, DIN2501 PN10/PN16
· Inspection & testing: EN12266-1
3. TECHNICAL SPECIFICATION· Working pressure: PN10 / PN16 Bar
· Size: 2″~32″ (DN50~800mm)
· Materials: cast iron, ductile iron
· Epoxy resin thickness: ≥250micron
· Applicable temperature: 0℃~+80℃
· Available with handwheel/square cap/gearbox/ electric actuator
What is the Difference between Rising Stem Gate Valve and Non-rising Stem Gate Valve?We may not be particularly familiar with the rising stem gate valve and non-rising stem gate valve. There is a fundamental difference between them...
There are mainly two types of gate valves in the market – the rising stem gate valve and non-rising stem gate valve. Maybe you are now in a dilemma and don’t know how to make a choice. This article aims at telling you the difference between these two kinds of gate valves, and what the advantages of one over the other are. Hope it will do you some favor. Rising stem gate valves are usually made from cast or forged steel while non rising stem gate valves are more typically brass, bronze or cast iron. Non rising stem valves take up less space and rising stem valves require more space. In the rising stem gate valve, the round handle rotates a threaded shaft which is attached to its center. Turning the handle will cause the stem to rise as it opens the valve and descend as it closes the valve. With a rising stem gate valve it is easy to tell if the valve is open or closed by looking at the amount of stem that is exposed. If the handle is flush with the pipe (no exposed stem), the valve is closed. If a lot of stem is exposed, the valve is open. This simple system has a couple of disadvantages which can be avoided compared with another type of gate valve: the non-rising stem gate valve. As for the non-rising stem gate valve, it is usually suitable for tight places where there is not enough room for the stem to raise, for example, places with underground pipes. The non-rising stem gate valve is fully open when the handle is rotated as far as possible to the left and fully closed when the handle is rotated as far as possible to the right. In both cases the handle is flush with the pipe because the mechanism inside the pipe opens and closes the valve without raising the stem. Another advantage to the non-rising stem gate valve is that it is easier to padlock. With the rising stem gate valve, two different size padlocks could be needed to lock the valve open and closed. With the non-rising gate valve one padlock is enough. But the disadvantage of a non rising stem valve is the fact that the screw threads that lift the gate are exposed to the fluid being controlled by the valve. This can cause problems if the fluid tends to foul the threads, so non rising stem valves are usually only used on clean liquids and gases.
4. Non-rising stem gate valve‘s application· Water supply system
· Waste water, sludge, sewage treatment industry
· Irrigation system
· Real estate industry
· Mining, steel industry
· Metallurgy plant, power plant
· Textile, pharmaceutical industry
· Food, pharmaceutical industry
Contact Us
- Anhui Prosper Flow Technology Co.,Ltd.
- Contact nameWang Anping
- Phone86-562-8898168
- AddressNo.951,Taishan Road Tongling,Anhui
Gate Valve | Check Valve | Butterfly Valve | Air valve |
Globe valve | Pipe fittings |
- AST/OPC solenoid valve coil 300AA00086A for power generation
- globe valve SHV6.4 for power station
- temperature Regulating valve LWH-ZG1/2 for power plant
- Inclined groove three-way distributor Pneumatic electric circular three-way valve XZ500 distributor
- sealing oil floater tank float valve FY-40 for power generation
- Sinro Motorized Valve SR04GB32046B4 for power station
- servo valve G761-3034B for power plant
- Bare Stem Fluorine Lined Butterfly Valve
- Alpha split isolated valve ABvalve OEB5level
- AlphaAB valve split butterfly valve
- AB valve Split Isolated Valve split butterfly valve
- Manual Operated Wafer Type PTFE Lined Butterfly Valve
- Pneumatic PTFE Lined Diaphragm Valve
- solenoid valve 22FDA-F5T-W220R-20 for thermal power plant
- solenoid valve J-110VDC-DN10-Y/20H/2AL for power generation
- ealing oil float tank float valve BYF-40 for power station
- Air transfer chute three-way to curved four-way distributor valve
- B500 Air chute pneumatic closure valve Inflatable manual plugboard valve
- Aseptic transfer αβ Valve manufacturer sealed feeding powder transfer AB valve
- Manufacturer of high activity powder transfer AB valve split type butterfly valve
- makeup water solenoid valve K25FJ-1.6PA2 for power generation
- AST/OPC solenoid valve 0508.919T0301.AW027 for power plant
- X43T-10Cast iron copper core two-way flanged plug valve
- PTFE Lined Globe Valve
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Valves
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Wang Anping
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-