Home > Products > Mitsubishi > 400W Mitsubishi J4 ac servo motor drive MR-J4-40A for sewing machine
400W Mitsubishi J4 ac servo motor drive MR-J4-40A for sewing machine
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
- New PLC Programming USB-SC09-FX Cable for Mitsubishi MELSEC USB to RS422 Adapte
- Hot sale plc controller programmable logic controller Q series 100% original Mitsubishi plc Q38B in stock
- Good price Mitsubishi plc module q-series plc controller cpu Q61P with faster delivery
- (NEW) MITSUBISHI Q03UDVCPU PLC High-speed type USB Ethernet port CPU module
- free shipping Mitsubishi original Q series PLC module Q03UDVCPU warranty 1.5 years low price
- High-tech Smart Original Mitsubishi Q03UDVCPU PLC Q series Programmable Logic Controller Module
Product Description
Product Overview
MR-J4-40A Mitsubishi Servo driver / Servo amplifier
MR-J4 Servomotors and Amplifiers
With a capacity range of 50W to 7kW (200V only), both the amplifier and motor size is reduced. We added a high resolution encoder of 4 million pulse/rev, with a speed frequency response of 2500Hz. Additional fetures include advanced one-touch auto tuning and advanced vibration suppression control II functions. The MR-J4 motors ahve the same flance size as J3 notors with the lenght of the motor bing the same or smaller than the J3.The same cables for power, encoder and brake can be used for the MR-J3 and MR-J4. MR-J4 Series has four models: MR-J4A (analog/pulse train),MR-J4B, (SSCNET III/H), MR-J4W2B (Dual axis amplifier with SSCNET III/H) and ME-J4W3B (Three axis in one amplifier with SSCNET III/H). In addition, MR-J4 has three motor models available: HG-KR similar to HF-KP, HG-MR similar to HF-MP, and HG-SR similar to HF-SP Series. M-Size software is used to size HG Series motors and setup is made easy using MR-Configurator.
Combinations of Rotary Servo Amplifier and Servo Motor
Power | Servo Amplifier | Servo Motor | ||||||||
200 V/100 V Class | ||||||||||
HG-KR053 | HG-KR13 | HG-KR053B | HG-KR13B | |||||||
HG-MR053 | HG-MR13 | HG-MR053B | HG-MR13B | |||||||
200W |
MR-J4-20A/B/GF
| HG-KR23 | HG-KR23B | HG-MR23 | HG-MR23B | |||||
400W | MR-J4-40A/B/GF | HG-KR43 | HG-KR43B | HG-MR43 | HG-MR43B | |||||
HG-SR51 | HG-SR51B | HG-SR52 | HG-SR52B | |||||||
HG-JR53 | HG-JR53B | |||||||||
HG-KR73 | HG-KR73B | HG-MR73 | HG-MR73B | |||||||
HG-JR73 | HG-JR73B | |||||||||
HG-SR81 | HG-SR81B | HG-SR102 | HG-SR102B | |||||||
HG-JR103 | HG-JR103B | |||||||||
HG-SR152 | HG-SR152B | HG-SR202 | HG-SR202B | |||||||
HG-SR121 | HG-SR121B | HG-SR201 | HG-SR201B | |||||||
3.5KW | MR-J4-350A/B/GF | HG-SR352 | HG-SR352B | HG-SR301 | HG-SR301B | |||||
5KW | MR-J4-500A/B/GF | HG-SR502 | HG-SR502B | HG-SR421 | HG-SR421B | |||||
7KW | MR-J4-700A/B/GF | HG-SR702 | HG-SR702B | |||||||
200 V Class | ||||||||||
MR-J4-200A/B/GF | HG-JR153 | HG-JR153B | HG-JR203 | HG-JR203B | ||||||
HG-RR103 | HG-RR103B | HG-RR153 | HG-RR153B | |||||||
HG-UR152 | HG-UR152B | |||||||||
HG-JR353 | HG-JR353B | HG-RR203 | HG-RR203B | |||||||
HG-UR202 | HG-UR202B | |||||||||
MR-J4-500A/B/GF | HG-JR503 | HG-JR503B | HG-RR353 | HG-RR353B | ||||||
HG-RR503 | HG-RR503B | HG-UR352 | HG-UR352B | |||||||
HG-UR502 | HG-UR502B | |||||||||
HG-JR703 | HG-JR703B | HG-JR601 | HG-JR601B | |||||||
HG-JR701M | HG-JR701MB | |||||||||
11KW | MR-J4-11KA/B/GF | HG-JR903 | HG-JR903B | HG-JR801 | HG-JR801B | |||||
HG-JR12K1 | HG-JR12K1B | HG-JR11K1M | HG-JR11K1MB | |||||||
15KW | MR-J4-15KA/B/GF | HG-JR15K1 | HG-JR15K1M | HG-JR15K1MB | ||||||
22KW | MR-J4-22KA/B/GF | HG-JR20K1 | HG-JR25K1 | HG-JR22K1M | ||||||
30KW | MR-J4-DU30KA/B | HG-JR30K1 | HG-JR30K1M | |||||||
37KW | MR-J4-DU37KA/B | HG-JR37K1 | HG-JR37K1M | |||||||
400 V Class | ||||||||||
500W | MR-J4-60A4/B4/GF4 | HG-SR524 | HG-SR524B | HG-JR534 | HG-JR534B | |||||
1KW | MR-J4-100A4/B4/GF4 | HG-SR1024 | HG-SR1024B | HG-JR734 | HG-JR734B | |||||
HG-SR1524 | HG-SR1524B | HG-SR2024 | HG-SR2024B | |||||||
HG-JR1534 | HG-JR1534B | HG-JR2034 | HG-JR2034B | |||||||
3.5KW | MR-J4-350A4/B4/GF4 | HG-SR3524 | HG-SR3524B | HG-JR3534 | HG-JR3534B | |||||
5KW | MR-J4-500A4/B4/GF4 | HG-SR5024 | HG-SR5024B | HG-JR5034 | HG-JR5034B | |||||
HG-SR7024 | HG-SR7024B | HG-JR7034 | HG-JR7034B | |||||||
HG-JR6014 | HG-JR6014B | HG-JR701M4 | HG-JR701M4B | |||||||
HG-JR9034 | HG-JR9034B | HG-JR8014 | HG-JR8014B | |||||||
HG-JR12K14 | HG-JR12K14B | HG-JR11K1M4 | HG-JR11K1M4B | |||||||
15KW | MR-J4-15KA4/B4/GF4 | HG-JR15K14 | HG-JR15K1M4 | HG-JR15K1M4B | ||||||
22KW | MR-J4-22KA4/B4/GF4 | HG-JR20K14 | HG-JR25K14 | |||||||
30KW | MR-J4-DU30KA4/B4 | HG-JR30K1M4 | HG-JR30K14 | |||||||
37KW | MR-J4-DU37KA4/B4 | HG-JR37K14 | HG-JR37K1M4 | |||||||
45KW | MR-J4-DU45KA4/B4 | HG-JR45K1M4 | ||||||||
55KW | MR-J4-DU55KA4/B4 | HG-JR55K1M4 |
PRODUCT SPECIFICATIONS
Servo Amplifier Model | MR-J4-10A | ||
Output | Rated Voltage | 3-phase 170 VAC | |
Rated Current (A) | 2.8 | ||
Power Supply | Voltage/Frequency | 3-phase or 1-phase 200 VAC to 240 VAC, 50/60 Hz | |
Rated Current (A) | 2.6 | ||
Permissible Voltage Fluctuation | 3-phase or 1-phase 170 VAC to 264 VAC | ||
Permissible Frequency Fluctuation | ±5% maximum | ||
Control Circuit Power Supply | Voltage/Frequency | 1-phase 200 VAC to 240 VAC, 50/60 Hz | |
Rated Current (A) | 0.2 | ||
Permissible Voltage Fluctuation | 1-phase 170 VAC to 264 VAC | ||
Permissible Frequency Fluctuation | ±5% maximum | ||
Power Consumption (W) | 30 | ||
Interface Power Supply | 24 VDC ±10% (required current capacity: 0.3 A (including CN8 connector signal)) | ||
Load-Side Encoder Interface | Mitsubishi high-speed serial communication | ||
Tolerable Regenerative Power of the Built-in Regenerative Resistor | 10w | ||
Control Method | Sine-wave PWM control/current control method | ||
Dynamic Brake | Built-in | ||
Protective Functions | Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection,encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, over-speed protection, error excessive protection, magnetic pole detection protection, linear servo control fault protection | ||
Fully Closed Loop Control | Available in the future | ||
Safety Function | STO (IEC/EN 61800-5-2) | ||
Safety Performance | Standards Certified by CB | EN ISO 13849-1 Category 3 PL d, EN 61508 SIL 2, EN 62061 SIL CL 2, EN 61800-5-2 SIL 2 | |
Response Performance | 8 ms or less (STO input OFF — energy shut-off) | ||
Test Pulse Input (STO) | Test pulse frequency: 1 Hz to 25 Hz; Test pulse off time: 1 ms maximum | ||
Mean Time to Dangerous Failure (MTTFd) | 100 years | ||
Average Diagnostic Coverage (DCavg) | 90% | ||
Probability of Dangerous Failure Per Hour (PFH) | 1.01 × 10 -7 [1/h] | ||
Communication Function | USB: Connect a personal computer (MR Configurator2 compatible) | ||
CE Marking : LVD: EN 61800-5-1; EMC: EN 61800-3; MD: EN ISO 13849-1, EN 61800-5-2, EN 62061 | |||
UL Standard : UL 508C | |||
Structure (IP Rating) | Natural cooling, open (IP20) | ||
Close Mounting | Possible |
Packing & Delivery
Packing Details : 1pcs/carton
Delivery Details : 1-2 days after order confrimed
Contact Us
- Guangzhou Hongsen Servo Motor Co., Ltd.
Product Categories
AC Motor drive (VFD) | Coupling | Delta | HongSen servo motor |
Mitsubishi | New arrived | Other Automation Products | Planetary gearboxes&gearmotors |
Power supplies | Rockwell Allen-Bradley | Siemens PLC | Ungrouped |
New Products
- Mitsubishi CPU Q04UDEHCPU for Industrial Automation PLC Controller Q04UDEHCPU
- MITSUBISHI MELSEC Q CPU Unit Q03UDECPU Universal 30kStep Memory Ethernet Enabled PLC
- Made in Japan Mitsubishi Universal QCPU CPU unit PLC Q13UDHCPU
- Original and new Q series of mitsubishi plc CPU module Q02UCPU
- Factory price CPU Q00UJCPU-S8-SET Mitsubishi PLC programming cable controller Modules
- New original Automation controller PLC mitsubishi Q series Q00UJCPU
- Mitsubishi Q Series CPU Ethernet Networking Mini USB Interface PLC Q00UCPU
- large stock Factory Mitsubishi CPU Module PLC Automation mitsubishi plc Q25HCPU
- Mitsubishi Q02HCPU High Speed Q CPU Module Programmable Logic Controller PLC
- 100% Made in Japan Processor Mitsubishi Melsec CPU Q02CPU price
- Mitsubishi Q series PLC Module Q02CPU plc motion controller with large stock
- Mitsubishi Mitsubishi I/O points 1024 CPU Module CPU Q01CPU Basic Unit PLC Mitsubishi
- Best and cheap plc Mitsubishi Q series Q00CPU in stock
- Both fit brand mitsubishi automation blowing machine plc FX5-C32EX/D
- Mitsubishi 32 point IO module Input output PLC FX5-C32ET/D
- Mitsubishi FX5-485ADP PLC Control power 5 V DC, 20 mA,with Terminal resistor Built-in
- Original Industrial Controls Mitsubishi FX5 PLC FX5-232ADP
- PLC Special offer 100% original mitsubishi PLC FX5-16EX/ES with warranty one year
- 100% original Mitsubishi Programmable Controllers FX5 series FX5-8EX/ES Products
- ORIGINAL BRAND Mitsubishi PLC I/O FX2N-4DA NEW PLC Mitsubishi elevator cpu module
- 100% new original FX2N-64MT-D fx3n64mtd mitsubishi plc fx2n
- Mitsubishi chinese plc controller FX2N-32MR-D
- Guaranteed Quality Control System Mitshubishi Plc Programmer FX2N-32MR-001
- Supplier Controller Programmable Mitsubishi Series Plc FX2N-32MT-001
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor > AC Motor
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-