Intelligent 5kw wind solar hybrid controller for 5kw wind generator 120V

Battery parameters

Applicable battery voltage

48V-380V (set according to the actual battery rated voltage, different voltage levels, different hardware, do not use with mismatched batteries)

Battery protect method

over voltage protection, under voltage protection (when there’s output selection)

Voltage at the over voltage protection point

58.0V±1V/(48V) (settable)

Voltage at the over voltage recovery point

55V.0±1V/(48V) (settable)

Voltage at the under voltage  recovery point

46.0V±1V/ (48V) (settable)

Voltage at the under voltage protection point

42.0V±1V/ (48V) (settable)

 Parameters of wind turbine input port

Rated power of applied wind turbine

1KW-10KW (defines according to type)

Rated input current (DC after rectification)

10A-60A (defines according to type)

Unloading method

PWM stepless high-frequency soft unloading (built-in)

 Parameters of PV input port

Rated power of applied PV

1KW-15KW (defines according to type)

Rated input current of the port

10-60A (defines according to type)

PV protection method

Reverse connection protection

Unloading method

Open circuit unloading

output port

Max. through current

20A

Output structure

Relay passive node (always open or close)

others

Display mode

Liquid crystal (LCD) display

Communication mode

RS232(5V electrical level),RS485 (optional)

Displayed parameters

wind turbine input voltage/current/power/generated energy/rev/unloading current

PV input voltage/current/power/generated energy

Battery voltage/charging current/power/total charging capacity/battery status information

Power consumption in standby mode (screen backlight closed)

About 40ma / 48V system

Operating mode

3M foil key operation (4 buttons)

Working temperature / humidity range (environment)

-40~+60℃/20~85%RH (non condensing)

Protection grade

   IP41