Home > Products > gopower2 > 15KV SF6 Gas Load Break Switch

15KV SF6 Gas Load Break Switch

FOB Price

US$ 2300 - 6000 / Piece

5 Pieces(Min. Order)

Payment TermsT/T L/C
Delivery Detail45 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

15KV SF6 Gas Load Break Switch

15 kv pole mounted disconnect switch is suitable for rated voltage 15kV, rated current 630A, 50/60Hz distribution network breaking. The load current or overload current in a power system automatically isolates the faulty sections of the distribution line.

With the latest technology electronic controller, this manual load break switch realizes manual operation, electric operation, and remote operation. The electronic controller is installed in the stainless steel box and can be used under various climatic conditions. In addition, 15kv load break switch cable and wireless modems can be installed in the box to realize remote monitoring and control. Simple installation and arrangement on the pole are convenient, quick, and low construction cost.

Characteristics of 15KV SF6 Gas Load Breaker Switch

The 15KVpole mounted disconnect switchis made of proven durable, corrosion-resistant material. (304L stainless steel plate for warships), ensure a long service life (30years), our 15kv load break switch can carry out a series of operations, with the pole top equipment ideal characteristics.

EachGOPOWER 15kv load break switch has been filled with sf6 gas before leaving the factory, sealed treatment. The 15 kv pole mounted disconnect switch test was carried out according to IEC60265-1 (1988) GB 3804-1990 standard.

SF6 Load Break Switch In Pole Mounted Switch Solution

15kv load break switch has a certain interrupting capacity because of the interrupting device, but 15 kv pole mounted disconnect switch is not as strong as the interrupting capacity of the circuit breaker, which can split the normal working current, and in the case of short circuit, he can only silently withstand the short circuit current, and if this time the manual or electric breaking may explode, so the load switch is generally used together with the current limiting fuse (load switch + fuse is not the standard configuration, and can also be used without fuse) In the event of an overload or short circuit, the circuit is broken by a fuse. In order to save costs, the load switch + fuse can replace the circuit breaker. Inquiry more pole mounted switch solutions

Specification of 15 KV Pole Mounted Disconnect Switch

Products Type	FWX-15
Basic Ratings
Maximum System Voltage	15KV
Rated Continuous Current	630A
Rated Frequency	50/60Hz
Short Time Withstand Current	IKA/sec
Making and Breaking Capacity
Mainly Active LoadCurrent	630A
Number of Load-break Operations	400times
Short-circuit Making Current(peak)	50K

Number of Making Operations on 15 KV Pole Mounted Disconnect Switch

Number of Making Operations	5 times
Cable Charging Current	loudspeaker
Line Charging Current	loudspeaker
Closed Loop Circuit Current	630A
Transformer Magnetizing Current	22A
Power Frequency Withstand Current Test
Wet Condition- 10 sec (Ph- Ph-Eth, Across Interrupters)	50KV
DryCondition- I min ( Phase to Phase, Phase to Earth)	50KV
Dry Condition - 1 min (Across Interrupter )	60KV
Impulse Withstand Current Test(1.2 x 50 s)

Internal Arc Test of 15 KV Pole Mounted Disconnect Switch

Internal Arc Test	20kA / 0.1 sec
Arc Extinction Medium	SF6 Gas
Insulation Medium	SF6 Gas
Creepage Distance (Porcelain)	560mm
IP Level	54
Operation Performance
Closing/Opening Tin
Mechanica l Operations (Guaranteed)	l OOOO times
Operating Temperature.1re(*Manual Type)	-25～+70℃
Gas Pressure
Nominal Pressure (kg/cm2 G, at 20°C)	0.07
Bursting Pressure (kg/cm2 G)	4 ~ 6
Minimum Gas Pressure (kg/cm2 G)	0
Leakage Rate (cc/ sec)	1%

Other Ratings & Specifications of 15 KV Pole Mounted Disconnect Switch

Other Ratings & Specifications
Internal Arc Test	20kA / 0.1 sec	20kA / 0.1 sec	20kA / 0.1 sec
Arc Extinction Medium	SF6 Gas	SF6 Gas	SF6 Gas
Insulation Medium	SF6 Gas	SF6 Gas	SF6 Gas
Creepage Distance (Porcelain)	380mm	700mm	1055mm
Creepage Distance (Silicon)	780mm	1200mm	1550mm
Dry arcing distance	≥200mm	≥	≥
IP Level	65	65	65
Operation Performance
Closing/Opening Time	1sec	1sec	1sec
Mechanical Operations (Guaranteed)	10000times	10000times	10000times
Operating Temperature (*Manual Type)	-25～+70℃	-25～+70℃	-25～+70℃
Gas Pressure
Nominal Pressure (MPa, at 20°C)	0.07	0.07	0.07
Bursting Pressure (MPa)	0.4～0.6	0.4～0.6	0.4～0.6
Minimum Gas Pressure (MPa)	0.05	0.05	0.05
Leakage Rate (cc/ sec)	≤0.5%	≤0.5%	≤0.5%
Voltage sensors
CT ABC 10P10 5VA	400:05:00	400:05:00	400:05:00
Incoming side and outgoing side of the voltage sensor	6 Voltage sensor（built-in） Phase voltage：（24（36）kV/√3）/（3.25V/√3）
	Special attention should be paid to the voltage sensor, which must be directly fed by the 15kv load break pole mounted disconnect switch. No additional adjustment circuit can be added to the controller. The voltage signal of the switch into the test line needs to be tested separately.

Gopower attaches great importance to the improvement of enterprise research and development ability. It invests no less than 8% of annual sales in product research and development every year, and its r&d technicians account for more than 30% of the total number of the company. We have a well-equipped, experienced, professional, dedicated and stable r&d technical team, and cooperate with south China University of Technology, Sun Yat-sen University, Beijing Institute of Technology and other domestic universities to jointly carry out research on the application and future direction of products in the field of smart distribution network, Our pole mounted disconnect switch such as11kv lbs,15 kv pole mounted disconnect switch,feeder terminal unithave always been dedicated to providing customers with stable and reliable overall solutions for smart distribution networks with a professional spirit.