Furan resin sand reclamation line sand mixer

Foundry Resin Sand Molding Machine Description
The resin sand mixer is mainly composed of low-speed sand mixing cage, high-speed sand mixing cage, base, sand hopper, liquid material conveying system, air pipe system, electric control operating system and sand quantitative system. The key component is a high-speed sand mixing cage shell that can be opened in the left and right directions to facilitate cleaning.Abrasive resistant materials are surfacing on the surface of the mixing tool, and the layout of the mixing tool has a certain Angle. In the process of use, when there is any change, the machine should stop and adjust the Angle.Because resin sand mixer takes curing agent as hardening agent, and curing agent is a kind of weak acid, which has corrosiveness to a certain extent, it is necessary to take protective measures in the process of adding.Resin sand mixer used for conveying curing agent metering pump also requires strong corrosion resistance, it isrecommended to use Italy OBL original mechanical diaphragm pump.

Main Features:

1) The two-arm continuous resin (sand) sand mixer is a single sand mixer. The machine is composed of a primary conveying agitator and a secondary sand mixing agitator.Low speed conveyor is adopted for the agitator, and high speed mixing is adopted for the agitator.

2) The mixing cage is made of fully open cemented carbide welded on sand mixing blades with a service life of over 2000 hours.

3) The liquid material is transported by mechanical diaphragm metering pump imported from Italy to transport curing agent (curing agent pump), and gear pump (with stepless variable speed motor) to transport resin, or according to the user's requirements all choose imported gear pump for transport.

4) The mixed sand head tailings are very small, and the electrical control system is controlled by imported PLC to ensure 100% operation rate of the machine.

5) Liquid material conveying valve (commonly known as proximal control valve) can be selected anti-corrosion liquid material reversing valve (backflow valve), the valve can do stop pump, sand mixer working valve in the working position when not working hit the backflow position, then work again hit the working position, to solve the problem of too much tailings when frequently open the pump head.

The liquid material is sprayed into a fan-shaped fog belt by compressed air, making it easier for the binder to mix with sand quickly and evenly. You can also choose the back blowing valve with the back blowing function.
Technical Parameter

Our Service
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory : We are manufacturer, specializing in producing all kinds of machinery for more than 20 years, competitive with good quantity.
7.Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8.As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.