75 Ohm to 120 Ohm Coax to RJ45 16E1 Balun Panel
Overview:
The coax to RJ45 16E1 balun converter allow 75 Ohm coax to communicate with 120 Ohm twisted pair equipment. The 16E1 balun panel specifically address the ONP requirement that PTTs offer 120 Ohm twisted pair terminations to their customers. Some telecommunication equipments output only on 75 Ohm coax,or have customers whose CPE has only 75 Ohm coax connections. The 75 ohm to 120 ohm balun panel present a ready solution to this termination mismatch by allowing a bi-directional conversion of coax(75 Ohm )to a twisted pair (120 Ohm ),supporting data rates to E1(2.048Mbps). The signals output by them are scaled to match the pulse shape requirements specified by the CCITT G.703 standard.
Data Rates to 2.048 Mbps
75 Ohm to 120 Ohm Twisted Pair (RJ45;
Bi-Directional Signal Conversion
2U high enclosed chasiss
mounts in a standard 19 inch(48.3cm) rack
No AC Power or Batteries Needed
16 Female BNC connector Available
BNC connector and RJ45 connector are front.
G.703 Interface
Send Inquiry to This Supplier
You May Also Like
-
24E1 1.6/5.6 Coax 75ohm to RJ45 120ohm Balun PanelUS$ 200 - 250MOQ: 1 Unit
-
16 E1 Coax to RJ45 Front Mount Balun PanelUS$ 150 - 200MOQ: 1 Unit
-
USB to RS485/422 Interface ConverterUS$ 50 - 70MOQ: 1 Unit
-
16Channel Serial RS232/RS422/485 to Ethernet ConverterUS$ 150 - 200MOQ: 1 Unit
-
One Channel Serial to Ethernet Converter With DB9 PortUS$ 100 - 150MOQ: 1 Unit
-
One Channel Modbus Serial to Ethernet ConverterUS$ 100 - 150MOQ: 1 Unit
-
One Channel Modbus Serial to Ethernet ConverterUS$ 100 - 150MOQ: 1 Unit
-
Serial-rs232-rs485-to-wifi-ethernet ConverterUS$ 100 - 150MOQ: 1 Unit
-
E1 G.703 to RS485 ConverterUS$ 150 - 200MOQ: 1 Unit
-
2Channel Serial to Ethernet ConverterUS$ 150 - 200MOQ: 1 Unit