SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer

As one of the professional China power transformer manufacturers, Yuebian has advanced production equipment and a complete product inspection system. Our transformers have high mechanical strength, balanced ampere-turn distribution and good short-circuit resistance.

General introduction of SGB10 Cast Resin Transformer:

Cast Resin Transformer, is well applied in power plant substation with low voltage device, high voltage device, transformer and other components integrated, greatly recognized by its functional and energy saving properties. It is safe, non-pollute, and flame proof which can be installed directly on the load centre with the merits of free maintenance, easy installation, low combined operation cost, low loss and excellent humidity resistance.

Service condition:

The height above the sea level is below 1000m.

Ambient temperature:

Highest air temperature +40ºC

Highest daily average air temperature +30ºC

Highest annual average air temperature+20v

Lowest outdoor air temperature-25ºC

The scope of application:

Applies to high fireproofing, load fluctuating, unventilated, incommodious, dirty and moist environment such as power plant field, subway, metallurgy, hospital, high-rise building, shipping center, crowded resident zone, and the special environment such as petrol-land chemical industry, nuclear power station, nuclear submarine.

Product features(advantages )of SGB10 Cast Resin Transformer:

A.Good heat emission, big overload capacity. Can work without wind machine for a long time under 130 overloads, and be full load without compulsive wind cool without capacity descending under IP45 condition.

B.Perfect safe and resistance to fire operating can be combusting for long period under 800ºC and without smoke

C.Strong resistance to thermal shock(can be full load immediately at -50ºC)

D.Complete waterproof and airproof.

E.No partial discharge

F. Good hydrophobicity and good resistance to alkaline cauterization and fundal influence

G. Environmental, low noise, no deleterious gas, easy to decomposition.

What is Non-Encapsulated Coil Dry-Type Transformer?

The Non-dry type encapsulated transformer is characterized by safety, reliability, energy saving, fire protection, anti-explosion, simple maintenance, etc. The well-designed coil structure and vacuum impregnation treatment process makes the dry type transformer free of partial discharge and free of fracturing or insulation level decline during the whole shelf life. All products are qualified by National Mechanical & Industrial Bureau and National Power Transformers Company. It is widely used in power network, projects, grid construction, etc.

Production Process of SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer

Specification of SG(B) 10 Type 10kv Series Non Encapsulated Coil Transformer