FY8300-30M 30MHz 4CH TTL Level Output 3-Channel DDS Function Arbitrary Waveform Signal Generator

FY8300-30M 30MHz 4CH TTL Level Output 3-Channel DDS Function Arbitrary Waveform Signal Generator

Description:
FY8300S series dual-channel function / arbitrary waveform generator is a high-performance and cost-effective signal generator. It can be used as a function signal generator, arbitrary waveform generator, pulse signal generator, VCO, frequency sweeper, counter and frequency meter. Rich shortcut keys simplify complicated operations. It is especially suitable for electronic enthusiasts, scientific research institutions and high-tech enterprises, automotive repair and other fields.

Using DDS technology, the instrument produces accurate, stable, low distortion output signals, and all parameters are calibrated by internal procedures. All functions of the instrument can be controlled by the host software. You can use the host software to edit the arbitrary waveform and save it to the signal generator to output the waveform. Communications protocol is open to makes secondary development easier. It features large-scale integrated circuits, SMT, high reliability and long service life. With output short-circuit protection, all signal output terminals can work under load short circuit conditions for 60s.

Difference Between FY8300S and FY8300:
-FY8300S is with VCO to control output. FY8300 is designed without this function.
-FY8300S is designed with rich modulation functions, including ASK, FSK, PSK, AM, FM, PM. FY8300 is designed without this function.
-FY8300S is built with 4-channel TTL signal generation function and the phase difference between each channel is precisely adjustable. FY8300 does not support the function.
-FY8300S support triggering pulse train to output. FY8300 does not support the function

FY8300S Features:
- Completely independent three-channel output (equivalent to 3 independent signal sources), able to work synchronously, the phase difference is accurately adjustable.
- Adopt DDS technology, produce accurate, stable and low distortion output signals.
- Desktop design with ABS plastic casing, AC 100 ~ 240V (AC) wide voltage power supply.
- 2.4-inch (320 * 240) color display screen.
- Simple and easy to use, unique and copyright-protected operation interface design, which can display three-channel output status at the same time.
- The highest output frequency is 60MHz (sine wave), 250MSa / s sampling rate, 14bits vertical resolution.
- Press and hold OK key during use to quickly save the parameter information currently output by the instrument, and the saved parameters can be automatically loaded when it turns on again.
- Channel Tracking Function: When it is tracking, all parameters of both channels can be updated at the same time according to the user's configuration.
- Output up to 98 groups of functions / arbitrary waveforms, including 34 preset waveforms and 64 user-defined waveforms (arbitrary waveform editing software supporting the instrument can be used to edit arbitrary waveforms and download to the instrument output). The preset waveforms include: sine wave, square wave, rectangular wave (adjustable duty cycle), trapezoidal wave (both rising and falling edge time can be set accurately), triangle wave, and pulse wave (pulse width and frequency can be set precisely fixed), rising sawtooth wave, descending sawtooth wave, step wave, trapezoidal pulse wave, sinker pulse, narrow pulse wave, noise wave, exponential rise, exponential decline, electrocardiogram, Lorentz pulse wave, multi-tone wave, CMOS (0 ~ 12V), four-channel TTL level and DC voltage, etc.
- 64 sets of arbitrary wave storage bits. The storage depth of each group is 8192 * 14bits (the longer the waveform storage depth, the more waveform details are saved, and the signal details can be restored with high accuracy).
- High Frequency Accuracy: The frequency accuracy can reach the order of 10-6.
- High Frequency Resolution: Full range frequency resolution 1uHz (0.000001Hz).
- Output amplitude can be up to 24Vpp and amplitude resolution can be up to 1mV (0.001V).
- With DC bias function of -12V ~ + 12V (<20MHz), the resolution can reach 1mV.
- The duty cycle of both channels can be adjusted independently, and the adjustment accuracy can reach 0.01%.
- The pulse width and pulse frequency are continuously adjustable, and the adjustment range is 20ns-1S. The pulse amplitude can be continuously adjusted between 0-12V, and the adjustment accuracy is 0.001V.
- The phase adjustment range of two channels is 0 ~ 359.99°, and the adjustment accuracy is 0.01°.
- No Range Limitation: Direct digital settings are available for full range frequency.
- Digital signal output function can realize any CMOS level with amplitude of 0 ~ 12V.
- Scanning Function: Four attributes of the signal: frequency, amplitude, offset, and duty cycle can be scanned separately. It has two scanning modes, linear scanning and logarithmic scanning.
- Pulse Train Bursted Output Function: Optional three trigger modes: Manual trigger, internal CH2 trigger and external trigger, which can make the machine output any pulse train of 1 ~ 1048575.
- VCO Function: Support VCO voltage control signal parameter output function (such as voltage controlled oscillator).
- Rich Modulation Types: AM, FM, PM, ASK, FSK and PSK modulation.
- Storage Characteristics: It can store 20 sets of instrument state parameters set by users, which can be recalled at any time.
- 100M Frequency Meter Function: Four measurement methods: frequency measurement, period measurement, positive and negative pulse width measurement, and duty cycle measurement. The maximum measurement frequency can reach 100MHz, and the minimum measurement frequency is 0.01Hz.
- Counter Function: With DC and AC coupling measurement methods, it can effectively solve the problem of inaccurate AC coupling counting.
- All parameters can be calibrated by internal procedures.
- Equipped with powerful arbitrary waveform editing function, it can be downloaded to the instrument to output the waveform after editing the arbitrary waveform on your PC.
- Powerful Communication Function: PC can be used to control the instrument. The communications protocol is open, making secondary development easier.
- High Reliability: Large-scale integrated circuit, SMT, high reliability and long service life.
- Output Short-circuit Protection: all signal output terminals can work for more than 60s under load short-circuit conditions.
- Optional FYV2000 series or FPA1000 series power amplifiers can be used to make the signal stable output of more than 20W in the DC-10MHz bandwidth. The FPA101A output power can reach up to 100W.

Package List:
-1 x Signal Generator
-1 x Power Cord
-1 x USB Data Cable
-1 x BNC-BNC Cable
-3 x Q9 Clip Cables

Detail photo 

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Sample ususally take within 3 working days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.

Q4. How to proceed an order?

A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.

Q5. After paid, what info of the supplier provided?

A: Tracking number

Q6: Do you offer guarantee and after-service for the products?

A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.

Packing and Shipping

Package: Normally we use the standard paper package to export worldwide.

Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.

3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.

4. By Sea: Delivery from the Shenzhen sea port .

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery