Home > Products > Tester Equipment > GPSDO GPS Clock 10M LCD Display Frequency Message Disciplined Oscillator
GPSDO GPS Clock 10M LCD Display Frequency Message Disciplined Oscillator
- 1000 per Month
- T/T Credit Card
- RF Demo Kit for NanoVNA Radio Frequency Demonstration Antenna Analyzer Calibration
- MLA-30+ Active Loop Antenna Shortwave 100KHz-30MHz with 1.2M Adapter Cable For S2000
- XT-127 10-2700MHz Portable Signal Measuring Instrument Frequency Spectrum Analyzer Meter
- Nuclear Radiation Detector Meter Handheld Geiger Counter with External Geiger Tube
- GTmedia Freesat Finder Digital Satellite Finder 1080P DVB S S2 S2X Satellite Meter Satfinder
- MR9270S+ HART Thermal Resistance Thermocouple Paperless Recorder 4-20mA Signal Generator Transmitter
Product Description
GPSDO GPS Clock 10M LCD Display Frequency Message Disciplined Oscillator
User manual 20180313Version Pasword:vr5x
Key Feature:
- Output 10MHz accuracy sine wave or square wave,low noise
- Output 1pps second pulse,sync with UTC time,can keep time.
- High sensitive GPS receive,small sky can lock.
- With lock inductor,red led off,equipment lock.
- Power is 12V/1.5A,simple easy,can used switch power
- Unexpensive,small valume,used convenient
- The unique removal of GPS signal jitter algorithm,higher accuracy
- LCD display GPS strength,time,output frequency
Overview: GPSDO name GPS disciplined oscillator,used GPS output accuracy time signal to control clock equipment.This equipment used GPS output 1 pps,control on board OCXO,used special algorithm to filter the GPS time jitter.make the OCXO output accuracy clock. always amend.board with LCD display gps strength,time and frequency deviation.
Parameter:
- NAME:LCD-GPS DISCIPLINED OSCILLATOR
- POWER:DC11.7-12.9V<=15W
- GPS ANT POWER:DC3.3V/50mA
- 1PPS OUTPUT:SQUARE WAVE,3.3Vpp
- 10M OUTPUT :SINE WAVE,1Vrms (10-15dBm),square wave,3.3/4.7Vpp
- RS232 OUTPUT:GPS NMEA SIGNAL
- ACCURACY: above than OCXO 2 order of magnitude
- SIZE:W*H*D=107*55*172mm(INCLUDE BNC CONNECT)
1.Work state led
ALM : warning,on,output frequency accuracy is low.
GPS LOCK:GPS lock inductor,while GPS lock,led on.
RUN: run indicator led,led flash,equipment is normal,If not flash,fault in equipment.
2.DB9 connect,output NMEA GPS flow.output 1PPS signal,RS232 level.
3.One pulse per second,BNC connected.from GPS module.rising edge is valid,
4.10MHz output,BNC connected,output sine wave or square wave.
5.Connect active GPS antenna,SMA connected.
6.External power connect,used 5.5mm/2.1mm DC plus.inside is positive,outside is negative,11.7-12.9V max 15W
6.Accessory is 5m active GPS antenna,DC12V/1.5A nnect GPS antenna,connect DC12V power supply.can output 10MHz standard frequency.
ATTENTION: must be used 5.5/2.1 DC plus,if used 5.5/2.5 will poor contact.
Front is a LCD,display machine state.
4.3 Connect PC
GPSDO-DB9 PC-DB9
PIN2--------------------PIN2
PIN3--------------------PIN3
PIN5--------------------PIN5
PIN8--------------------PIN8
GPSDO-DB9 PIN2,PIN5,PIN8 is connect to PC-DB9 PIN2,PIN5,PIN8,
Baud rate is 9600BPS,Baud rate is fixed.
4.4 Rear panel work state:
Power up : three led all on,all off,then RUN flash,GPS LOCK led off,WARN led on.
Power up current: less than 1.5 A.
Preheat: on board there is a OCXO,OCXO preheat need 30 minute.After a period of time,the current will slowly become small.Until GPS LOCK led on,WARN led off,means the equipment is normal
Normal: RUN led flash,GPS LOCK led on.WARN led off,means GPSDO running normal.When WARN led off,the accuracy is less than 0.05Hz@10MHz,keep GPS lock for 5 hours,the accuracy is less than 0.005Hz@10MHz.
4.5 Front panel LCD state:
Used 1602 LCD, display area there is two line,every line there is 16 character.
GPS signal strength display,First line 1,2 character,display GPS signal strength,first character is antenna mark,all display,second character is GPS signal strength,there is 6 step.from strength weak to strong is empty,1dot,2dots,2+3dots,2+3+4dots,2+3+4+5dots.
Character display area,6character,can via command to setting.
time display area, 8 characters,can via command setting
Disciplined state display,1 character,when system is accuary,display L,else not display.
Referenec output frequency display area,15 character.
Power up,LCD dots all on,then all off,check lcd is good or bad.
then display
GPSDO UTC +/- XX:XX display UTC offset
BG7TBL V20171210 display author and version
complete,enter normal display mode
If GPS not fix,LCD bottom will display GPS NO FIX
4.6 Display mode setting command
Setting display frequency mode,6 character,UTC offset,need short inside PCB jump.
Baud rate is 9600BPS,data bit 8,stop bit 1,Check bit NONE,flow control NONE.
Command is star with $GPGTC,end with T*,middle is 12 byte command.
$GPGTC,X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 T*
X1,setting display frequency mode,10000000.0000Hz,1,10M +/-0.0000Hz,2,10M +/-000.00ppb 3,10M +/-0.00000ppm
X2 X3 X4 X5 X6 X7 display 6 character.
X8 time offset,+/-
X9 X10 hour offset,max 23
X11 X12 minute offset,max 59
Example 1:display BJT,UTC+8,ppb,command is $GPGTC,2 BJT +0800T*
Example 2:display GMT UTC+0,display 10000000.0000Hz,command is $GPGTC,0, GMT +0000T*
Example 3,display EST-5,PPM,command is $GPGTC,3 EST +05:00T*
Command is OK,machine return OK.
connect db9,connect jumper.
com port setting,input command
4.7 Use notes:
LCD display frequency is reference only,there is deviation with actual output.
Gpsdo long time on line,the surface of the machine is warn, This kind of phenomenon is normal.
GPS antenna avoid interference,avoid high voltage,avoid lighting.put antenna to open sky.one line sky can lock,but the accuracy and jitter is worse.
Signal flow:1575M signal come from GPS antenna,input the GPS module,GPS output 1PPS and NMEA GPS lock signal.Used 1PPS for gate via CPLD and MCU output EFC signal,correct the OCXO output frequency.
FAQ:
1.Q : how can I know the machine is good.
A : power on times,red led off,machine is good.
2. Q : how can I know MCU is good.
A : when power on,all LED will on,then RUN led flash,red LED on,means MCU is good.
3. Q:5m GPS active antenna is short,how to do.can not connect GPS antenna?
A : Used GPS extended line,such as 5m,10m,15m,20m extended line.can not used GPS antenna,it is a OCXO.
4. Q: i used frequency counter test frequency is difference with LCD display frequency,what can i do?
A:LCD display frequency is reference only,actual test there is deviation.when LCD display L10000000.000xHz or other L frequency,frequency is accuary.Make sure test frequency standard is less than 0.001Hz accuary else is the frequency standard deviation.
Q: GPS strength is change some time is high some time is low
A:that is right,Because the signal intensity is affected by the satellite position,the weather and the Algorithm.
Package List:
- 1 x GPS disciplined clock
- 1 x AC110-220-DC12V ADAPTER
- 1 x 5 m GPS ANT
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery.
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: 5H,Buidling B,Yueshang Center, Longhua Area,Shenzhen,
China (Mainland)
Contact Us
- Shenzhen Tianzhongtian Trading Co., Ltd.
Business&Industry | Comsumer&Electronics | Health&Care | Hobbies&Toys |
household products | Metal Detector | Tester Equipment | Ungrouped |
- Handheld Hart475 Hart Field Communicator for Pressure Temperature Transmitter Calibration
- EBC-A10H Li/Pb Battery Charging Capacity Test Power Performance Tester & Charger + USB to TTL Cable
- 0.1-1000MHz/0.1-1300MHz HF VHF Antenna Analyzer with 4.3\" TFT Imported Capacitive Touch Screen VIA-0113
- 10K-1500MHz 4.3\" IPS Button NanoVNA-F Vector Network Analyzer for Version Hardware V3.1with RF Demo Kit
- ADF4355 Module RF Signal Generator with Shell OLED Display VCO Microwave Frequency Synthesizer PLL
- FC-4000 50Hz-4GHz RF Frequency Meter Portable Frequency Counter with 5\" Color Display
- 2.8\" S-A-A-2 Shortwave HF VHF UHF NanoVNA V2 50KHz-3GHz Vector Network Analyzer Kit
- HF VHF UHF NanoVNA V2 Vector Network Analyzer 50KHz-3GHz Antenna Analyzer + Cables Calibration Kits
- 50mW Visual Fault Locator YJ-550C Mini Size All in One Fiber Optical Power Meter
- GDF-A4 Portable Veterinary Ultrasound Scanner For Small Animals Dogs Cats Sheep
- YR1035+ Lithium Battery Internal Resistance Tester Meter with Kelvin Clips for Range 0-100V 0-200Ohm
- YR1035+ Lithium Battery Internal Resistance Tester Meter for Range 0-100V 0-200 Ohm (Full Kit)
- 150W Voltmeter Adjustable Constant Current Electronic Load Charger USB Meter Indicator Digital Battery Capacity Tester
- 2.8\" Touch Screen 50KHz-900MHz NanoVNA Vector Network Analyzer for MF HF VHF UHF Antenna W/O Shell
- S-A-A-2 Shortwave HF VHF UHF NanoVNA V2 50KHz-3GHz Vector Network Analyzer Antenna Analyzer with Shell
- 2.8\" 50K-3GHz NanoVNA Vector Network Analyzer Antenna Analyzer For Shortwave HF VHF UHF
- 50K-3GHz NanoVNA Vector Network Analyzer Antenna Analyzer For Shortwave HF VHF UHF
- 1MHz-3.5GHz Simple Spectrum Analyzer Tracking Generator Noise Signal Generator
- EBC-A20 Li-po Battery Capacity Tester 5A Charge 20A Discharge 85W Multifunction Battery Current Test
- EBC-B20H 12V-72V 20A Lead Acid Lithium Battery Capacity Tester Support External Charger
- EBD-B10H 12-72V Lead-acid Battery Capacity Tester Lithium Battery Charge Discharge 10A for Balancing Car
- SEMXYZR-80 XYZR 4-Axis Micrometer Linear Stage 80x80mm Crossed Guide Rail Manual Linear Stage
- 60x60mm Trimming Platform Bearing Tuning Sliding Table XYZ 3 Axis Linear Stage
- SEMX80-AC 80x80mm X-Axis Manual Linear Stage Micrometer Linear Stage
Popular Searches
Find Similar Products By Category
- Electronic Components & Supplies > Active Components > Oscillators
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-