Technical parametersl:
- Depth detection range: 5-50 m
- Detection distance range:100-1000 m
- Rechargeable battery: continuous work, SD  
- Voltage: 12VDC
- Thtemperaure range from 45~85
- Humidity: 0~ 95% (no condensation)
- 16 bit processor, 40MIPS speed—160MHz
- 32 bit DDS synthesis chip, waveform output
- Digital frequency synthesis 20PLL, automatic frequency stabilizer,0.1 mhz
- Color lcd display,480x320 pixels
- Net weight: 6.6 kg;Gross weight:10.5 kg.
- Product size: 47X37X13.5cm

Installation:
- Scanner installation management
Note:In the daily work, the battery should be fully charged.If you don't fully charge it, the EPX10000 can go wrong.If abnormal, this may be the first warning that the battery voltage is too low and should be charged.If the battery is charged all night,but the battery is still no power, you need to replace the battery, or battery charger, or DC current output port without electricity. If the battery is partly charged, the battery may need to be replace the built-in battery.A new fully charged battery can make EPX10000 work for 8 hours.
- Before turning to the scanner,put an EPX10000 transmitter on the ground,the sensor antenna is connected into the crresponding jack for transmitter.While opening the transmitter,never plug or unplug the sensor,if to do so, it may cause damage to the machine.
- Before using EPX10000 scanning,make all necessary connections:
Connect the sensor to the scanner testing (+) and (-) jack, insert the probe sensor to soil.
Install the antenna transmit device to the corresponding interface.
Rotate the "on / off" knob with power key to switch on the power.In the LCD display area,power indicator,horizontal trmming,longitudinal trmming light indicator.
At this point, EPX10000 is scanning any selected elements.Before you start the testing,make it running for 3-5 minutes.
Remember to turn off the EPX10000 power after the operation. To facilitate the use of the device, the battery needs to be charged with a small charger connected to the instrument's power line
- The battery of the instrument needs to be charged with a small charger connected to the instrument's power line.

Package List:
- 1 x EPX-10000 Metal Detector with degausser

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port . 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)