0.4mm Stamping Aluminum Strip

0.4mm thick stamping aluminum strip

Purpose: aluminum foil for dry-type transformer / transformer aluminum strip / aluminum strip / aluminum coil / aluminum foil

Material: 1060-o

Thickness: 0.2mm-3.0mm, width: 20mm-1450mm.

Description: the surface is smooth without scratches. The edge can be chamfered without burr, which is in accordance with the national standard. The resistivity is less than or equal to 0.028.

Packing: wooden pallet, inner diameter 300mm or 500mm 0.4mm thick stamping aluminum strip

The special aluminum strip for transformer has high aluminum content (usually more than 99.6% - 99.7%), and the electrical and thermal conductivity of aluminum is only lower than that of conventional metal of copper (I don't think any enterprise will use silver as conventional material, which is too expensive). The metal electrical conductivity is as follows: silver copper gold aluminum nickel steel alloy. Since the price of copper is much higher than that of aluminum, the commonly used material for transformer belt is aluminum belt. The grade of transformer aluminum strip mainly includes a1060 (o), which is mainly used in the high and low voltage windings of dry-type transformer as conductive material. The chemical composition of aluminum strip meets the provisions, technical requirements and mechanical properties of GB / T 3190-1996 chemical composition of deformed aluminum and aluminum alloy, and meets the technical conditions for the supply of finished aluminum foil for coil in tun900 069 1998 edition. The transformer aluminum strip produced by the company is mainly used in large-scale transformer, solar energy and power industries.

Based on the concept of building a brand with quality, the company has continuously improved the output and quality of aluminum strip products of our enterprise, introduced Taiwan Slitting unit, greatly improved the precision of products and ensured the overall quality of products.

Chaoyang Aluminum Co., Ltd. has a large number of spot stocks all year round. If you need transformer aluminum belt, you can contact us. We will provide you with perfect services with good products and considerate services.

0.4mm thick stamping aluminum strip

1060 transformer aluminum strip, low voltage transformer aluminum strip

Classification of aluminum strip

Aluminum strip is the finished product of aluminum coil obtained by aluminum ingot rolling, and then cut into aluminum strip and aluminum strip of required width by longitudinal shear unit according to the needs of application.

Basically, the alloy state of each brand can be made and processed into aluminum strip, among which the commonly used brands are 1050, 1060, 1070.1100, 3.03, 3.04, 5005, 5052, 80.1, etc. Common states include o state and H state. O represents soft state and H represents hard state. Numbers can be used after O and h to indicate the degree of softness and hardness and the degree of annealing.

The specific uses of aluminum strip mainly include: Transformer aluminum strip (transformer aluminum foil), aluminum strip for high-frequency welding hollow aluminum strip, aluminum strip for fin radiator, aluminum strip for cable, aluminum strip for stamping, aluminum strip for aluminum edge strip, etc.