Home > Products > FRP PIPE > GRP glass reinforced plastic electrical wiring conduit pipe process pipe RPM pipe

Share|

GRP glass reinforced plastic electrical wiring conduit pipe process pipe RPM pipe

Name: GRP glass reinforced plastic electrical wiring conduit pipe process pipe RPM pipe
Price: Negotiable

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment Terms:T/T Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Description

FRP pipe classification by application field

1.Chemical medium transportation pipe
2.Various producing process pipe (chemical process, paper making process, polluted water treatment process, sea water purifying process, food and drink producing process, and medicine producing process)
3.Pressure pipe for small hydroelectric power station on the ground and cycling pipe for power plant
4.Polluted water collecting and transporting pipe
5.Drink water transporting main line and tubing pipe
6.Oil field water injecting pipe and oil transporting pipe
7.Heat transporting pipe and sea water transporting pipe
8.Agricultural irrigation pipe
9.FRP set (ventilation, air-conditioner, chimney, cleaner) and piping
10.Gas drainage pipe for mine

Main characteristics of this process are the following:

The Bell and Spigot joint is an integral part of the pipe
The cross winding allows enough flexibility in the design to specify pipe of any axial and hoop strength
The axial strength is normally higher than that of pipes produced with other processes
Pipe stiffness is not related to joint stiffness which in any case is higher than the pipe stiffness and guarantees a very stable joint practically without deformation
The pipe could be made with our without silica sand depending on the load conditions

Nominal Pressure Classes:
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are: 4, 6, 10, 16, 20 bars.
Intermediate or higher-pressure classes can be provided depending on the design parameters and conditions.

Pipe Stiffness Classes:

Pipes are also classified according to specific pipe stiffness. Standard stiffness classes are: 1250, 2500, 5000 and 10000 Pa. Intermediate or higher stiffness classes are available on request or depending on the design conditions

Detailed Image

The range of pipes dimensions and characteristics offered is wide and able to meet many different application's requirements. They can be produced in any diameter from 25 mm (2") to 4000 mm (160"). Standard lengths are 6 and 12 meters however customized lengths are available on request.

Pipes are manufactured using the discontinuous dual helix filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers can be wound with different angles. The angle with the axis of the pipe can vary between 45deg; And 88deg; . The inside diameter of the finished pipe is defined by the mandrel outside diameter and the designed wall thickness is achieved by repeated winding passes. In such a way the outside diameter of pipe (OD) is determined by the pipe wall thickness. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of the mechanical wall.

FRP fiberglass reinforced epoxy pipe/epoxy tube Specification:

Material:Epoxy Resin,continous filament roving,flexible agent,curing agent.
Sizes: 1.5 to 40inches (DN40-DN1000)
Length: 10 m, 12 m;
pressure rating: Maximum 25.0MPa;
Working temperature: Maximum 120 ℃;
Connection:Thread ,Adhesive Bonded Joint, Bell / Spigot Double O-RING Joint;
Application: ballast, bilge, fuel, cleaning, ventilation, cooling, fireproof and other pipeline systems;

FRP winding pipe characteristics

1. Good physical mechanics performance
2. Being resistant to chemical erosion and longer service life
3. Excellent hydraulic characteristics
4. Lower installation and keeping cost
5. Flexible design and shorter reform term
6. No medium pollution

FRP fiberglass reinforced epoxy pipe/epoxy tube Executive standards:

ASTM D2996 "Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications" ASTM D2992 "Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) pipe and fittings" ASTM D1599 "Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe. Tubing and Fittings" API 15HR -2001"Specification for High Pressure Fiberglass line Pipe"

Packing & Delivery

Company Introduction

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.

Certifications

Testing Center

FAQ

Q: Are you a commercial company or manufacturer? A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd. Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements? A: For FRP products, all dimensions can be customized. We can do it at the customer's request. Q: How long is the delivery time? A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity. Q: Do you provide samples? Is it free or extra? A: Yes, we could offer the sample for free, but not pay the freight cost. Q: What are your payment terms? A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment. If you have another question, please send us your question directly.

Contact Us

Hengshui Aoliande Trading Co., Ltd.

Product Categories

Drainage ditch	Electrolytic cell	FRP cooling tower	FRP grating
FRP PIPE	FRP pultruded profiles	FRP storage tank	FRP tower equipment
Machine	Septic tank	SMC	Ungrouped
Water tank

New Products