TDCM

Dispersion is one of the transmission properties of the optical fiber, and the optical pulse signal will be broadened in time after transmission in the optical fiber for a distance, which produces inter-symbol interference, thus increasing the error rate and affecting the quality of communication. The tunable dispersion compensation module (TDCM) is created to solve this problem.

Types of TDCM

Tunable Dispersion Compensation Card

01- Tunable Dispersion Compensation Card

Tunable Dispersion Compensation line card uses fiber as the underlying technology to achieve tunability, which allows it to be unlocked from a specific 100/50 GHz grid-like fiber grating and etalon technologies require.

TDCM Applications

Chromatic dispersion is an important factor in the performance of fiber optic communications systems. It is a topic and performance characteristic that is important to be understood and accounted when operating and/or designing TDCM equipment for fiber-based networks.

With different colors of the light spectrum travelling at different speeds due to the differences in refractive index, in the figure above red light travels faster than blue, due to its lower index. Over distance, red and blue will be further separated, thus the signal will be broadened.

Over longer distances, this small "dispersion" eventually adds up to a degree that the receiving end cannot properly distinguish between two consecutive signals as the pulses start to overlap. If not managed, this can cause serious trouble in network communication systems, especially in fast bit rate applications.

TDCM (Tunable Dispersion Compensating Module) is a method using electronic filtering to compensate for dispersion in an optical communications link. It is suitable for high-speed, long-distance WDM transport systems. It can be included in a communications channel to compensate for signal degradation caused by the medium and has the ability to adjust the dispersion compensation value according to the characteristics of the optic fiber, which can the signal transport in long distance in a good way.

TDCM Advantages

Sintai TDCM is a tunable, fully integrated compensator that provides accurate dynamic control of chromatic dispersion for a variety of applications. Our TDCM instrument is featured with the fiber-bragg grating (FBG) technology, which has a broad dispersion range and operational bandwidth. It is available in card type and rackmount versions. The control software interface and hardware button allow for easy integration and minimal setup time for experimental configurations. Sintai TDCM has the following advantages:

• Adjustable

• ± 1200ps/nm dispersion tuning

• Flat Transmissivity

• Multi-channel colorless ITU grid operation

• Low latency

• Low insertion loss, tuning power, and polarization dependence

• G.652 slope matching

• Multi-channel

• The dispersion compensation range is large

• Transparent and does not change the optical signal.

• Simple structure

• Convenient maintenance

• Safe and reliable

TDCM FAQs

What is dispersion compensation module?

In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e.g., a long span of transmission fiber. A dispersion-compensating module is often placed between two fiber amplifiers.

How can we reduce dispersion?

What do you mean by zero dispersion fibers?

How does a dispersion compensation module work?

What is TDCM in WDM?

Guangzhou Sintai Communication Co., Ltd, provide dwdm transponder, semiconductor optical amplifier, dcm dwdm, dcm optical etc.