ISO6244 Automatic Drop Melting Point of Petroleum Waxes and Petroleum Tester petroleum product

Full Automatic  Drop Melting Point of Petroleum Waxes and Petroleum Tester

ISO6244

Product model: JF8026Z

Product Introduction

This instrument is suitable for detecting the drop melting point of petroleum wax and petroleum grease. The instrument adopts computer fully automatic control, real-time curve display sample temperature, simple operation. The test principle is to immerse the cooled temperature sensor vertically into the sample, make the sample adhere to the temperature sensor, and then put it in the test tube, and heat the sample according to the required heating rate to start melting the sample until the sample on the sensor drops down. , The temperature of the sensor at this time is the low melting point of the sample.

Technical Parameter 

1. Applicable standard:  ISO6244

2. Temperature control method: imported digital display PID temperature controller

3. Heat bath range: normal temperature~150℃±0.2℃

4. Cold bath temperature: normal temperature~-10℃±0.5℃

5. Refrigeration method: compressor refrigeration

6. Heating method: electric heating tube bath heating

7. Working power supply: AC220V±10% 50HZ

8. Control mode: computer fully automatic control

9. Result display: LCD screen display

Main Feature 

1. Windows operating system, Chinese interface, real-time curve display, automatic shutdown at the end of the test;

2. Imported fully enclosed compressor for refrigeration;

3. Metal bath heating, safe and environmentally friendly;

4. Separate temperature control system;

5. There is a circulating ventilator inside;

6. One-piece structure, small and beautiful appearance;

7. Separate heating and cooling system;

8. The compressor has a self-protection function;

9. Fengming of the system when the temperature is too high;

10. Microcomputer controller, PID function, digital display temperature (continuous display during testing), degree 0.1°C, Pt100 RTD temperature probe;

11. It is very convenient to access the control box;