ASTM D3527 Automatic Life Performance of Automotive Wheel Bearing Grease Tester automobile bearing Electric heater life test

Full Automatic Life Performance of Automotive Wheel Bearing Grease Tester

ASTM D3527

Product model: JF0773

Product Introduction

The instrument adopts computer fully automatic control and automatically judges the results. After the sample is installed, the instrument automatically performs intermittent work according to the standard requirements, and the entire process does not need to be maintained manually, which greatly reduces the operating intensity. In order to avoid safety accidents in the new generation of products, the program has a fault reminder, and the instrument will automatically stop when the instrument fails to ensure the safety of the equipment or other hardware.

Technical Parameter

1. Applicable standard:  ASTM D3527

2. Heating method: electric heater heating

3. Speed display: digital display speed

4. Temperature control method: digital display PID thermostat

5. Timing method: digital display timing

6. Temperature control range: room temperature～300℃

7. Loading load: 111N

8. Temperature control: ±1℃

9. Power of the whole machine: 1.5KW

10. Power supply: AC220V/50HZ

11. Control method: computer automatic control, test results

Features

1. High-speed DC motor 3000r/min;

2. Digital meter display of motor speed, adjustable, and equipped with overload protection device;

3. The test bearing meets the requirements of the standard;

4. Heat insulation materials are used in the heating box for heat preservation;

5. Fixed loading devices, no deviation;

6. Microcomputer temperature controller, digital display, ±1℃ PT100 sensor;

7. Digital display timer to record test time;

8. There is a hole for inserting a thermometer on the bearing sleeve;

9. Long-life dry-burning electric heater, stainless steel cabinet, easy to clean;

10. Windows operating system, English interface;

11. The test bearing tooling is easy to disassemble and easy to operate;

12. The system automatically detects faults and shuts down;

13. The test data automatically generates curves and displays them in digital form;

14. The test results are automatically stored and can be queried;