30CrMoA 35CrMo 42CrMo 16MnCr5 40Cr Steel Round Bar

Name: 30CrMoA 35CrMo 42CrMo 16MnCr5 40Cr Steel Round Bar
Price: Negotiable

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment Terms:T/T Credit Card

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Description

Product Name	30CrMoA 35CrMo 42CrMo 16MnCr5 40Cr Steel Round Bar
Material	30CrMoA 35CrMo 42CrMo 16MnCr5 40Cr
Nearly Brand	30CrMoA: ASTM 4130, JIS SCM430, EN 1.7218
		42CrMo: ASTM 4140, JIS SCM440, EN 1.7225
		*35CrMo*: 708A37, JIS SCM432, EN 1.7220
		*16MnCr5*: GB 16CrMnH, DIN 1.7131,
		*40Cr*: ASTM 5140, JIS SCr440, ISO 41Cr4
Specification	Diameter: 10~300mm, Length: 3000~6000mm
Type	Round/Square/Hexagonal/Angle/Flat Bar
*Payment Term	By T/T, 50% down payment, 50% balance before shipment.

35CrMo alloy structural steel has high static strength, impact toughness and higher fatigue limit, higher hardenability than 40Cr, high creep strength and durable strength under high temperature, long-term working temperature up to 500℃;Cold deformation medium
plasticity, poor weldability.Important structural parts for high load operation, such as transmission parts for vehicles and engines;Turbo-generator rotor, spindle, heavy load transmission shaft, large section parts.

42CrMoA belongs to ultra-high strength steel, with high strength and toughness, good hardenability, no obvious temper brittleness, high fatigue limit and resistance to multiple impact after tempering treatment, good low temperature impact toughness.The steel is suitable for the manufacture of large and medium size plastic molds which require certain strength and toughness.

16MnCr5 has good hardenability and cutting ability, for large section parts, after heat treatment can get higher surface hardness and wear resistance, low temperature impact toughness is also higher.16MnCr5 gear steel is used after carburizing and quenching, mainly used for manufacturing gear, worm, sealing shaft sleeve and other parts.

40Cr

steel is one of the most widely used steels in mechanical manufacturing industry.After tempering treatment, it has good comprehensive mechanical properties, good low temperature impact toughness and low notch sensitivity.Good steel hardenability, when water quench hardening to Ф 28 ~ 60 mm, when oil quenching hardening to Ф 15 ~ 40 mm.This kind of steel is suitable for cyanidation and high frequency quenching in addition to tempering treatment.The cutting performance is good, when the hardness is 174~229HB, the relative machinability is 60%.The steel is suitable for making medium - sized plastic moulds.

*Storage: Pay attention to moisture, dust, oil, lubricating oil, as well as surface rust, or poor welding corrosion resistance.When water is immersed between the film and the steel substrate, the corrosion rate is faster than that without the film.Warehouse storage should be placed in a clean, dry and easy to open the air, to maintain the original packaging state, the stainless steel film should avoid direct light, film should be periodic inspection, if the film deterioration (film life of 6 months) should be replaced immediately, if the packing material when pad paper, in order to prevent surface corrosion should be
immediately removed pad paper.

Our Service

Custom service
Metal element	Can add a certain metal element, according to customer requirements for metal element content adjustment
Specification	Regular size, large size, small size
Surface	No.1, No.2D, No.2B, No.3, No.4, #320, HLNo.4, BA
Hardness	Super soft, soft, semi-soft, low hardness, hard
Technology	Hot rolling, cold drawing, normalizing, annealing, high temperature tempering, solid solution treatment
Edge state	Yes or no trimming

After-sales service

Within 7 days after the customer receives the goods, can return or replace the goods and claim for compensation if there are quality problems. And the freight shall be borne by our company.
*Returns and exchanges are not acceptable undder the following circumstances:
1. Non-pruduct quality problems.
2. The product purchased cannot be used due to the customer's fault (please inform the purpose and other details of the product when you inquiring).
3. Product quality problems caused by natural disasters and other force majeure factors in transit.
4. Due to the customer transport, storage and other improper resulting in product quality problems.

Packing&Shipping

● Delivery time: Within 7-30 working days.
● Packing: Standard Seaworthy Packagements or Customized.

Company Introduction

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact us as below.

Contact Us

Jiangsu Cunrui Metal Products Co., Ltd.

Product Categories

Hastelloy Alloy	Inconel Alloy	Monel Alloy	Nickel Alloy
Other Special Alloy Steel	Stainless Section Steel	Stainless Steel Bar	Stainless steel coil/strips
Stainless Steel Pipe	Stainless steel pipe fittings	Stainless Steel Sheet/plate	stainless steel wire
Titanium	Topsale products	Ungrouped

New Products

30CrMoA 35CrMo 42CrMo 16MnCr5 40Cr Steel Round Bar

Product Description

After-sales service

Contact Us

Popular Searches

Find Similar Products By Category