Home > Products > Stainless steel coil/strips > Stainless Steel mirror finishing 304/304L coil/plate/sheet
Stainless Steel mirror finishing 304/304L coil/plate/sheet
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
- 1mm 0.9mm 310 304 316 321 304l Stainless Steel Coil 316L
- 304 304l Coil Cold Rolled 304 304l Stainless Steel 304 Coil Price Triply Clad Circle Metal Material For Cookware
- 304l Coil Ss Coil Ss 304l Stainless Steel Coil Ba Surface
- ASTM AISI Stainless Steel Coils 0.1mm thickness 304 Slit Edge stainless steel Strip for Ss Pipe
- ASTM AISI Stainless steel strip UNS S30100,SUS301,AISI301 Full hard,extra hard
- ASTM AISI 0.15-2.5.mm 400 Series Stainless Steel Coils/SS Strips 409 410 430
Product Description
Product categories
Product Details
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4( High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant equipment,Dishwasher linings,Element supports and fasteners.etc.
Product name | Metal material 300 series cold rolled stainless steel coil sheet 316l roofing sheet coil |
Grade | 201,202,303, 303Cu,304,304L,316,316L,310S,316Ti,321,430,904L,etc. |
Standard | AISI,ASTM,DIN,JIS,BS,NB |
Certification | SGS,BV,IQI,TUV,ISO,etc. |
Origin | Tisco, baosteel, jiusteel ,etc. |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Package | clients' requirement and Standard export sea-worthy packing |
Delivery time | 5-15 days subject to the clients' requirement and quantity |
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
Application
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades |
Transport | exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles |
Oil and Gas | platform accommodation, cable trays, subsea pipelines |
Medical | Surgical instruments, surgical implants, MRI scanners |
Food and Drink | Catering equipment, brewing, distilling, food processing |
Water | Water and sewage treatment, water tubing, hot water tanks |
Chemical/Pharmaceutical | pressure vessels, process piping |
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture, structural sections |
reinforcement bar,lighting columns, lintels, masonry supports |
packing
Company Profile
Workshop
F A Q
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below.
Contact Us
- Jiangsu Cunrui Metal Products Co., Ltd.
Product Categories
New Products
- ASTM AISI 201 j2 cold rolled narrow stainless steel coil strip
- 304 430 316 stainless steel coils and sheets supplier
- Aisi 306 904l Stainless Steel Coil Strip
- AISI ATSM 304 306 316 316L 630 stainless steel coil/strip SS304
- Hot Sale Stainless Steel 201 202 304 306 430 Coil/Plate/Sheet/Strip From China Supplier
- ASTM stainless steel strip coil 440c Stainless Steel Price Per Kg
- ASTM PVC protecting film available 0.05mm~1.0mm Thin 303 Stainless Steel Strip / Stainless Steel Band
- Cold Rolled Suppliers DDQ 2B Grade 201 Bright J1 J3 J4 J2 200 stainless steel coil
- Acero inoxidable Precio Placas Laminas aisi sus 201 304 316l 304l 430 410 420 409 stainless steel coil price half hard 2B BA
- ASTM AISI SUS SS 321 Stainless Steel Coil Hot Rolled No.1 Finish 3mm/4mm/5mm/6mm/8mm/10mm/12mm
- ASTM 201 304 410 430 inoxidable inox plate stainless steel price per ton
- ASTM 420j2 304l Bright Mirror Finished Stainless Steel Coil
- ASTM 430 9Cr18 440C Stainless Steel Coils
- AL-6XN 1.4529 Super Austenite stainless steel coil price
- ASTM Factory direct 304 polished 1250*1.2mm Cold Rolled Stainless Steel Coils
- ASTM cold rolled ss uns s31608 0.5mm-3mm inox 316 stainless steel coil
- Hot selling Stainless Steel 304 408 409 410 coil/plate/sheet/circle
- ASTM Grade 304 304L Ss Coils /Plate Cold/Cold Rolled Stainless Steel Coil/Plate/Sheet
- AISI SUS 301 304 304L 309S 316 410 420 430 440 Stainless Steel Strips /Belt , Spring stainless steel band / Stainless Steel Coil
- Manufacturer Factory hot rolled 304 304L 304J1 321 stainless steel strip 3mm 7mm 8mm 9mm 2B HL prices per kg
- 201 stainless steel strip price
- Factory Price Rado Watches Stainless Steel Strip 201 304 316 316L 310S 430 409
- china cold rolled aisi 201 301 304 316 316l 410 420 421 430 439 stainless steel strip with 0.1mm 0.2mm 0.3mm 1mm 2mm 3mm thick
- China manufacturer inox 304 201 430 stainless steel strip band for wholesale
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Stainless Steel > Stainless Steel Strips
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-