Castable Wax 3D Liquid Photopolymer Resin For Jewelry Casting

KS-3981 is a special wax castable resin for 3d printers that is very similar to wax. It is used for jewelry casting and most specifically for models with stone settings and surface models.

This resin has 100% ash-free burnout and provides top quality direct casting using a standard burnout cycle.

• Designed specifically to easily set stones on printed model

• Get perfect smooth surfaces also for large surface jewelry

• Same as wax properties and texture

• 100% Ash-free burnout for direct casting

This special resin can be used for any type of DLP or LCD curing 3d printer. It has fast curing properties depending on the 3d printer used.

• Fast curing properties for fast printing
  

• Suitable for 405nm wavelenght 3D printers

• 
  

ABS RESIN KNOWLEDGE

Photosensitive resin materials show different properties according to different formulations or manufacturing methods, and are suitable for different fields. Generally speaking, ductile materials such as ABS resin usually have a good balance between strength (stress that the material can withstand) and ductility (elongation or strain percentage), can withstand high stress or large strain, and are not prone to brittle fracture. If the toughness of the resin is poor, on the contrary, brittle fracture will easily occur.