6000BPH juice beverage filling machine CGFR18186

 Main features: 

1. The machine has compact structure, small occupation area, perfect control system, convenient operation and high degree of automation.  

2. Filling liquid cylinder, filling valve and other parts in contact with the material are made of stainless steel 304, easy to clean, meet the requirements of food hygiene.  The sealing parts are made of heat-resistant rubber to meet the technical requirements of high temperature disinfection.   

3. Normal pressure filling principle, sanitary positioning filling valve, accurate liquid level without liquid loss, to ensure excellent filling quality.  

4. The electrical control adopts PCL programmable controller to realize the automatic control from the bottle into the machine to the end of packaging. The frequency conversion speed control is adopted, which is easy for users to adjust and prepare, and meets the requirements of different processes for production capacity.  

5. Constant torque device is adopted for capping head, and magnetic clutch is used to adjust the torque of capping. The device ensures the quality of capping and will not damage the cap to ensure the quality of capping.  

6. Adopt efficient cap management system, which is equipped with automatic cap lifting, cap feeding, cap disinfection, cap washing, and perfect cap feeding and protection device.  

7. Changing bottle shape, only need to replace the star wheel and arc plate can be realized, simple and convenient operation.  

8. Equipped with perfect overload protection device, which can effectively protect the safety of the machine and the operator.  

10. The machine adopts frequency conversion speed regulating motor, which can easily adjust the production capacity.  

11. The main electrical components, frequency converters, photoelectric switches, proximity switches, electronic valves, etc., are imported from MITSUBISHI, OMRON OMRON, SCHNEIDER SCHNEIDER and other components to ensure the excellent performance of the machine.  

12. The control system has the functions of automatic water level control, missing cap detection alarm, automatic stop alarm and shift output count, etc  

Introduction to basic mechanism of equipment:  

Rinsing part:  

1. Into the bottle passage is an air conveying device directly connected with the bottle dial  

2. All 304 stainless steel cleaning heads, water jet water injection meter, save water, more clean  

3.304 stainless steel gripper with plastic pad to ensure minimal bottle collision during cleaning  

4.304 stainless steel cleaning pump CNP NANFANG pump  

Filling part:  

1. The liquid cylinder and filling valve are made of sanitary stainless steel, the material is 304 or 316 for choice.  

2. The filling adopts lifting negative pressure filling, equipped with reflux device, no bottle no filling, filling volume can be fine-tuned, filling level is the same after filling.  

3. All stainless steel contact parts and liquid tank, fine polishing, no dead Angle, easy to clean 

Capping part:  

1. Magnetic clutch to adjust the screw cap torque, the device to ensure the quality of the cap, and will not damage the cap, ensure the quality of the cap.  

2. All materials 304 stainless steel structure.  

3. No bottle, no cap, automatically stop when the bottle or cap is missing  

4. The sealing effect is stable, the unqualified rate is less than 0.01%  

Main Technical parameters: