Features:

All-copper core motor is energy-efficient, super-fine grinding, multi-function grinding technology, superior motor performance.

Food-grade stainless steel: Uses a food-grade martensitic stainless steel housing, which is stable and consistent with food safety and is safe to use.

High-pressure quick-opening design: one-time lid molding, mirror polishing, vacuum lock, completely eliminate powder spillage.

Instructions

1. Cut off the power and open the cover of the crusher. There should be no foreign matter in the crusher.

2. Close the cover, turn on the power, turn on the switch, make the grinder idly for 1-2 minutes, and observe if there is any abnormality before using it.

3, cut off the power, the cover will open, into the crushed material, can not exceed the amount of crushing, the cover is tightly closed, connected to the power, open the switch, operation, crush the sound from noise to the sound when it is crushed into powder, ie Can shut down.

4, cut off the power, open the lid, use the brush to clean the crushing tank.

5, on the first use to remove the crushing tank, wipe with a wrung hot cloth and then wipe with a thousand cloth, playing a rice.

Product Details

1.Non-slip feet: Effectively prevent side slipping, it is extremely practical to use, and it demonstrates the safety at work

2.Ergonomic handle: The smashing cover is ergonomically designed and integrated

 3.Food-grade stainless steel crushing warehouse: Using stainless steel wire drawing, it is hygienic and aesthetically pleasing, so that it will maintain its bright color for a long time without any processing pollution.

4.Swing knob: high-grade rocking, dumping powder, simple and fast, convenient for the elderly

5.Overload protector: After the motor trips, simply plug in the power and press the overload protector for 3 seconds to reset.

Announcements

1) the amount of crushed inputs should not exceed the amount of crushed. (Recommended not to exceed half of the crushing tank)

2) the crushed material must be dry, not wet and grease. (Watery things dried in the sun or microwave oven)

3) just start the machine, hit the crushed object stuck the blade, so that the motor can not be rotated (will find the low sound of the pimple), to immediately turn off the power to prevent the motor from being burned, and then remove the card, check the fuse is good Bad, reboot

4) generally only half a minute to smash the Chinese medicine, hard powder can be crushed for one minute. The grinding time should not be too long to prevent the fine powder from sticking.

5) The machine can not be operated continuously for a long time. The time of starting each time must not exceed 5 minutes. The processing quantity is many, and the middle must rest (pause) to prevent the bearing from overheating and damage the motor.

6) long-term use, carbon brushes and blades to wear out new (spare parts).

7) the operation table should be free of other irrelevant items. The crusher is placed on a stable surface. When confirming the power supply voltage, the power supply should be located close to the work surface. The power outlet must have a reliable grounding wire. Do not pull the power cable to prevent it from tipping over and destroy the crusher. Other accidents occurred.

As shown in Figure 8, if the motor does not turn, you must cut off the power, check the power cord plug contact is good, the fuse is open and the carbon brush has serious wear, replace the spare fuse and carbon brush. If the motor still does not turn, it must be repaired by a professional. In general, replace the accessories and use it.

9) During the use of the machine, it is forbidden to open the upper cover or put the hand, brush and other tools into the crushing tank to avoid mechanical and personal accidents. When the cover is opened, the plug must be pulled out to prevent personal injury caused by touching the switch. It is forbidden to wash the entire machine smash tank directly with water.

10) When the machine is not in use, it must be placed in a dry, clean and ventilated place.