Fully automatic laundry bar soap making machine line for hot selling

             soap making machine/small soap production line

Steps(finishing line soap making machine):
1: put the soap tablets or soap tablets into the mixer, start the mixer, and then put the flavor, pigment, other accessories, preservatives, etc. evenly, open the material valve, put the material into the silo, wait Mixer.
2: start the first conveyor and the first three-roll mill, and then open the silo valve, let the material into the conveyor to the grinding machine grinding.
3: Start the second and third conveyors and the second three-roll mill.
4: Wait for the material into the double vacuum after the machine, confirmed that continuous production, start the first screw, start the second screw after the material.
5: Wait for the article. Start the printer and the fourth conveyor to confirm the print speed and the same speed, the good soap loading, soap head and poor access to the conveyor back into the machine.

Operation:

1. Turn on switch, put the soap rightly under the pressing mold.

2. Press the stamping button, the mold will come down quickly with precise positioning, 3 seconds later, the mold up.

3. The soap is stamped well. you can repeat the simple operation for other soaps as well.

• The soap pressing machine is mainly used to pinto logo and shape on the soap.
•  If you want to print different shape, just need to change the mould.
• This soap stamping machine has light curtain protection device, which is an effective protection device and safer than protective guard, and can protect operator from danger.
•  This machine is safe and easy to operate, save labor and improve production.

• We can provide laundry and toilet soap making line from soap noodles:
  100kg/h	150kg/h	300kg/h
  500kg/h	1000kg/h	2000kg/h
  The soap raw material is soap noodles

This machine is used for stamping and shaping the soap.Press logo, flower, marks etc. on the soap by hydraulic.