Contact Platform Support
Help Center255A Round 45 Degree Bent Pliers Non-sparking Shears and Pliers
Related Products
-
121B Sliding T Type Wrench Non Sparking Safety ToolsNegotiableMOQ: 1 Piece -
121A Wrench Socket L-Type Wrench Socket L-Type FactoryNegotiableMOQ: 1 Piece
-
138 Bent Open End Wrench Explosion Proof ToolsNegotiableMOQ: 1 Piece
-
135 Combination Wrench Non-sparking Combination Wrench Non Sparking Safety ToolsNegotiableMOQ: 1 Piece
-
131D Pipe Wrench Hex Type Pipe Wrench Hex Type Pipe Wrench Rapid GripNegotiableMOQ: 1 Piece
255A Round 45 Degree Bent Pliers non-sparking Shears and Pliers Shears and Pliers manufacturer
Non-sparking Tools
Beryllium Copper & Aluminum Bronze
Die Forged
ISO 5745
Cutting wire or holding tiny components.
Products Details
Number |
Size inch |
L mm |
Be-Cu g |
Al-Br g |
255A-1002 |
6 |
150 |
190 |
170 |
The following are the safety measures you should take when using pliers:
Check the wire cutting ability of the pliers and all other functions before taking a given application. When choosing the perfect pliers for your application, you must understand all types of pliers.
Use pliers to cut the wires at right angles.
Some people often use a hammer on pliers to cut thicker wires. This activity may damage your hands and pliers. Therefore, never use the hammer on the pliers, and do not use the pliers as a hammer.
In addition, never put the pliers in a place where the temperature is high. If the pliers are kept in an area where the temperature is too high, the performance of the tool will change. In this way, the pliers cannot be used for cutting wires or other applications.
If you want to extend the life of the pliers, take good care of them. You must clean it regularly, and you should also oil it regularly.
You cannot use pliers to tighten the nut.
What are the safety precautions for using pliers?
Wear safety glasses or goggles, or wear safety glasses or goggles when there is a possibility of being harmed by flying particles, wire fragments, etc.
Cut at right angles. Do not shake the tool from side to side or bend the wire back and forth on the cutting edge.
Using adjustable pliers allows you to firmly grasp the workpiece while maintaining a comfortable grip (ie, the grip is not too wide).
Use them only if the tools are intact.
The cut edges must be sharp. Blunt and worn cutting edges require more cutting force.
Make sure the toothed jaw is clean and sharp. Greasy or frayed jaws will lead to reduced safety. Such tools also require increased strength to hold the workpiece, which in turn increases the risk of muscle fatigue and repetitive strain.
Use oil tongs and wire cutters regularly. A drop of oil on the hinge will make these tools easier to use.
Pull up the pliers; do not push yourself away while applying pressure. If the tool accidentally slips and falls, you may lose your balance or touch the equipment or other hard objects with your hands, which may result in injury.
/shears-and-pliers/255a-round-45-degree-bent-pliers.html
Send Inquiry to This Supplier
You May Also Like
-
191H Sledge Hammer Non-Sparking Hammer Sledge Hammer PriceNegotiableMOQ: 1 Piece
-
245B Germany Type Adjustable Combination Pliers Explosion Proof ToolsNegotiableMOQ: 1 Piece
-
232 Chisel Hex/6Point Non Sparking Safety ToolsNegotiableMOQ: 1 Piece
-
257F Stocker Plier Non-Sparking Shears And Pliers Stocker Plier ManufacturerNegotiableMOQ: 1 Piece
-
266 Phillips Screwdriver Explosion Screwdriver Phillips Screwdriver WholesaleNegotiableMOQ: 1 Piece
-
No.AA17-47 Tool Set 47pcs Non-sparking Tools ISO Screwdriver Tool Set-10pcs ManufacturerNegotiableMOQ: 1 Piece
-
124A Labor Saving Wrench Non Sparking Safety Tools Explosion WrenchNegotiableMOQ: 1 Piece
-
183A Ratchet Wrench Combination Ratchet Wrench Wholesale Combination Ratchet WrenchNegotiableMOQ: 1 Piece
-
201A Edging Spade Non-sparking Hand Tools Non Sparking Safety ToolsNegotiableMOQ: 1 Piece
-
241 Crate Opener Explosion Proof Hand Tools Non Sparking Safety ToolsNegotiableMOQ: 1 Piece
