new Cooker Hood Filters/metal mesh air filters for factory

metal mesh air filters Product R & D and production, sales follow market-oriented standardization. With first-class technology. State-of-the-art equipment, elite team to ensure the good quality of the product.

2. Fire safety: effective hoods front-end filter fumes hoods, pipes save oil to reduce more than 90%, the device uses special alloy materials manufacturing, high temperature, effectively blocking the 700-degree heat sources of ignition, eliminating flue fire hazards .

3. Purification rate: fume purification effect in line with the (over) the state standards, purification process from fumes ingredients, the impact of the change in the concentration.

4. Environmental protection and energy saving: use, no water, no electricity, no noise, no trouble, replacement parts and cost savings. Does not change long-term use, installation and maintenance costs very little under two years time savings HOOD
Flue cleaning fee can save the purchase cost of the product. .
Installation, maintenance costs small.
5. Smoke smooth: a wind speed of 1.2m / s, pressure drop only 2.1mmAq. Ensure the kitchen health, a good working environment.

6. Installation and maintenance: equipment installed according to position in the hoods flame screens, convenient and beautiful, do not need to provide new space. No special requirements when cleaning rotary card file piece purifier can remove the cleaning liquid, dry, reinstall, you can use; often cleaning purifier, purifier to ensure the long-term, sustained and effective.

Technical principles:
The fire fume purifier is most suitable for Chinese cooking products in addition to oil fumes. It solves the filtration adsorption control technology applications soot gravity flow difficulties, resistance weakness;
Solve the deficiencies of the mechanical method of controlling low trapping efficiency. Achieve a balance between the two ventilation and decomposition.
Seven layer filter means 1,2-level to prevent large objects from entering and rectifier; degreasing filter two, from 0.04-0.1mm stainless steel wire, whose cross section is trapezoidal arc, when the fumes through the formation to Instead, the downward direction of the turbulence, increasing the contact surface, so that the accumulated oil discharge.
Technical Specification: Standard size: 500 × 500 × 25mm 500 × 500 × 30mm
Technical standards:
Fume purification capacity test and customer-site inspection, in full compliance with national standards: GB18483-2001
Industry standards: HJ / T62-2001