JZXC-20000 type rectifier relay
- 9999 Bag / Bags per Month
- PM630 Processor board Control unit
- IS220PPDAH1B Distribution system feedback model Board feedback signal
- DSDP140A Pulse counter board Long life and low failure rate
- 5SHX1445H0002 3BHL000387P0101 Driver board module Stable turn-off capability
- 6DD1661-0AB1 Coupled memory Communication module
- VME172PA-652SE Embedded controller With two IP slots
Product Description
Product Features
The JZXC-20000 rectifier relay is used as a buck-boost control relay in the power supply screen; as a signal channel and track power supervision relay; and a conversion relay between the main screen and the backup screen.
Applicable environment
a) Ambient temperature: -40℃~+60℃;
b) Relative humidity: not more than 90% (temperature +25°C);
c) Air pressure: not less than 70kPa (equivalent to below 3000m above sea level);
d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm;
e) Working position: horizontal;
f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken.
Features
1. The relay is an AC 220V heavy elastic rectifier electromagnetic relay, which adopts the principle of "constant gravity" to force the moving and closing contacts to open when the coil is de-energized.
2. It adopts silver-silver oxide contact, which has the characteristics of strong anti-adhesion and low contact resistance.
3. The magnetic circuit adopts electromagnetic pure iron material with small residual magnetism, and a stop piece is installed at the closed position of the armature and the iron core to ensure the minimum air gap of the magnetic circuit, prevent the magnetization of the ferromagnetic parts of the magnetic circuit, and ensure the reliable fall of the relay.
4. The relay consists of two parts: a rectifier circuit and a non-polar relay. The rectifier circuit is a bridge rectifier circuit composed of four 1N4007 silicon rectifier diodes. The input of the rectifier is alternating current, and the rectified current output to the coil is direct current.
5. The relay contact system is composed of common contacts, with six groups of common contacts for switching on and off.
Mechanical properties
Number of contact groups: 6QH;
Identification pin number: 23, 55;
Contact gap: not less than 1.3mm;
Pallet gap: not less than 0.35mm;
Contact pressure: the dynamic contact point is not less than 250mN; the dynamic disconnection point is not less than 150mN;
Contact uniformity error: not more than 0.20mm.
Electrical characteristics
Rated value: AC220V Magnetizing value: AC220V Release value: not less than AC 35V Working value: not more than AC105V Coil resistance: 10000 (1±10%) Q×2 coils in series, connect 1, 4, use 7, 8; time characteristics (At rated voltage): The pull-in time is not more than 01S, and the slow release time is not more than 0.15
Contact Us
- German Railway Track Equipment (Zhejiang) Co., Ltd
relay |
- 2213-75TSLKTB3009 Industrial control module Have anti-jamming capability
- VMIVME-7750 VMEbus board computer It has 32-bit addressing and 64-bit data bus
- D136-001-007 Servo controller Provides high resolution analog inputs
- 5SHX2645L0002/3HB012961R0001 Dc speed regulating medium pressure plate Accurately respond to control signals
- VERSION7 Stepper driver Maintain good performance
- 6ES7626-2DG04-0AE3 Integrated component simatic
- PM645B Multimode optical fiber communication module Compatible with multiple transmission fiber types
- TRICONEX 3009 Enhanced Main Processor (UMP) module Improve processor performance
- IS215ACLEH1BB Microprocessor-based controller
- 1394C-SJT22-A Servo controller Dc high precision power supply
- DS200TCQCG1BGF Dual system monitoring module
- IS215UCVEH2AE Used as a VME control card Vertical pin connector
- TRAFOTEK CHK0520 Line output reactor Reduce harmonic interference and improve system stability
- IC697CPX935 Central processing unit For communication
- 5464-414 Digital speed sensor A loop that provides control signals
- IC698CPE040-JP Central processing unit Rated processor speed
- A06B-6120-H075 driver The maintainability of the equipment is improved
- SR489-P5-HI-A20-E Protective relay Has a variety of input and output modes
- PPD113-B03-23-111615 Inverter processor The reliability of the system is improved
- PPD113B03-26-100110 Input module Powerful processing power
- 5SHY3545L0009 Power semiconductor device System reliability
- IS215UCVGM06A IS215UCVGH1A Single-socket CPU module Multiple extension or remote substrates
- PFTL201C 10KN 3BSE007913R0010 Tension sensor Able to capture more comprehensively
- 1785-V40L processor The instructions for transmitting data are programmed
Popular Searches
Find Similar Products By Category
- Electrical Equipment & Supplies > Relays
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-