dry air generator machine recycling of air drying and regeneration with vacuum pump

dry air generator machine recycling of air drying and regeneration with vacuum pump

Application

Supplying dry air that keeps the power equipment's inner parts from moisture in the maintenance of the transformer, reactor and other large power equipment.

Features

1. Remove moisture from the air. The dew point limit of the treated air can be below -80 °C.

2. Remove particulate matter from the air.

3. When the transformer works overnight, Instead of nitrogen-filled or hot oil circulating dryness

4. Dry air is supplied during transformer installation and maintenance to ensure dryness inside the transformer.

5. The cylinder is filled with dry air.

Technical Parameter 

Item	Parameter		Unit	TAD-50	TAD-100	TAD-150	TAD-200
Technical Parameter	Flow		M³/h	50	100	150	200
	Working Pressure		Mpa	0.6~0.8
	Pressure Drop		Mpa	0.05
	Noise		dB(A)	70
	Working Power		KW	380V-50Hz   3 Phase 4 Wire
	Total Power		KW	12	19	22	26
	Size	Length	cm	215	215	230	230
		Width	cm	155	155	165	165
		Height	cm	230	230	230	230
	Diameter		DN	32	40	50	50
	Weight		Kg	900	980	1030	1050
After Treatment Index	Discharge Pressure		Mpa	0.02~0.03
	Dew Point		°C	-50°C ~ -70°C
	Particle		um	0.01
	Oil content in air outlet		ppm	0.01

TAD Dry Air Generator's Flow Chart

When using the dry air generator for equipment maintenance, it is not affected by changes in external climatic conditions; especially for overnight operation, it is only necessary to seal the flanges and fill the dry air to 0.02MPa~0.03MPa. 

The lower the air dew point, the less water in the air and the drier the gas equipment. When the atmospheric dew point is 20℃, the water content in the air is 17.8 g/m³ ; when the atmospheric dew point is -70℃, the water content in the air is 0.005 g/m³ 

Assen's Main Products

Assen's Factory and visitors

Contact information

Sky ZHOU

Email: sky8tears@gmail.com

Tel/whatsapp +8618523178237

Website: