PET Hexagonal Wire Netting Fish Aquaculture Farm Cage Net

QYM-PET Fish Farming Cage Netting

PET Fish Farming Cage Netting ensures maximum water flow to the fish. This is due to the very low water drag resistance of the smooth monofilament PET and the semi-rigid structure that retains mesh opening and prevents overall net shape collapse.

This has resulted in some of the best ever production results in large scale salmon farming, such as higher SGR, lower FCR, lower mortality and higher fish harvest quality.

PET Fish Farming Cage Netting is used as shark nets as protection outside popular beaches.

A long cut in PET will tend to stay closed due to the double twisted thermoformed semi-rigid structure and non-tearing weaving.	The PET netting wire retains high tensile strength for decades below and above water.
Net sample after 20 years use in seawater in Japan. High tensilestrength is retained.	No need for antifouling paint No net changes

High performance and max water flow
High durability and strength
Escape and predator prevention

PET Fish Farming Cage Netting has very high durability,strength and other escape prevention properties. It is certified under NS 9415: 2009 to stay in the water or upto 14 years. This eliminates costly net changes and reduce the risk of net damage and fish escape during net handling. The PET iseasily cleaned, inspected and maintained while in the water (no anti-fouling used)

PET Fish Farming Cage Netting is used as shark nets as protection outside popular beaches.	The real strength of the PET is well tested when used as rock slide nets!

 
PET Fish Farming Cage Netting has proven very resistant to predator attacks(Grey Seals, Fur Seals, Sharks,Tiger Tooth Fish, Barracuda etc.)

Due to the strong PET monofilament and semi-rigid and tightly stretched net walls.Should damage to the net occur, the semi-rigid structure has proven to have self-closing properties that prevent fish escape. The mesh are also thermo-formed double twisted to prevent unraveling.

PET Fish Farming Cage Netting is handled in very similar ways to a nylon net, including drying up the net for crowding fish during harvest.	The semi-rigid structure keeps the net shape intact to maximize water flow and oxygen to the fish.
PET Fish Farming Cage Nettings are made to withstand rough conditions, stormy weather, predator,biologica or mechanical damage.	Extreme weather Predators Mechanical damage Biological deterioration

Experienced salmon farmers state that PET is easy to operate,handle and clean during ongoing farming operations. The low water drag resistance allows use of light weight sinkertube (10-15 kg/m compared to 40-70 kg/m). This makes handling the net during harvest, grading, sea lice treatments and similar easier and safer for the farm crew.

The upper section of the Fish Farming Cage Nettings have slightly tapered vertical walls with a 1m Jjump-net up top and the bottom is normally cone shaped.	Fish Farming Cage Netting being installed by use of cranes and skilled farm technicians.
Installation of Fish Farming Cage Netting as predator nets in the southern regions of Chile.	For shorter periods, Fish Farming Cage Netting can be hooked onto the railing net hooks when dried up.

Strong but light material

The shape of the PET wire mesh is designed to remain intact if a single wire is cut. This means the mesh will remain relatively stable and the shape intact with minimum negative effect of the strength of the net cage structure.
The PET Fish Farming Cage Netting is made from very strong but light weight PET,(Polyethylene Terephthalate).

The Fish Farming Cage Nettings are made for rough, daily use, from very strong but light weight PET.	The hard non-fibre wire reduce settling of marine fouling and makes the net easy to clean with a net cleaner from QYM Fence Factory.