Jiangsu Acrel Electrical Manufacturing CO.,LTD: Main products: power sensor, programmable power meter, DC power analyzer, Data center monitor device, Din rail energy meter, Isolated power supply, wireless temperature sensor , IOT energy meter , split core current transformer

Home > Products > DIN Rail Energy Meter > Acrel ADL200 Din rail energy meter/single phase electric meter/1 phase energy meter CE-MID

Acrel ADL200 Din rail energy meter/single phase electric meter/1 phase energy meter CE-MID

Name: Acrel ADL200 Din rail energy meter/single phase electric meter/1 phase energy meter CE-MID
Brand: Acrel
Availability: InStock

FOB Price

USD $35 - $35.1 / Piece

1 Piece(Min.Order)

Supply Ability 10000 Piece / Pieces per Month
Port Shanghai
Payment TermsT/T L/C D/P D/A Credit Card PayPal Cash Escrow Other
Delivery Detail7 days

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	Acrel	Place of Origin	China
Model Number	ADL200	Phase	Single Phase
Output Voltage	220V	Operating Temperature	-25℃~55℃
Dimensions	36mm90 mm65mm	Display Type	Other, LCD
Accuracy Class	Class 1.0	Measuring Energy Range	000000.00~999999.99kWh

Product Description

General

ADL200 din rail energy meter adopts DIN35mm din rail installation with LCD display,it can measure electric parameters and has energy pulse output, RS485 communication,which has the advantages of small size, high precision, good reliability and convenient installation.

Parameters

Voltage	Rated voltage	AC 220V
	Rated frequency	50Hz
	Consumption	<10VA
Current	Maximum current	80A
	Starting current	0.01A
	Consumption	<1VA
Measurement performance	Accurary	kWh Class 0.5
	Range	0-99999999kwh
Clock	Accurary	Error≤0.5s/d
Active pulse	Width	80±20ms
	Constant	1000imp/kWh,10000imp/kWh
Communication	Interface	RS485
	Protocol	Modbus-RTU
Temperature range	Work	-25℃-55℃
	Storage	-40℃-70℃
Humidity		≤95%(No condensation)
Altitude		<2000m

FAQ

Q:The display power or energy count is inaccurate after the meter powered on.

A:Switch the meter display interface to the power (active power P, power factor λ) interface, and check whether the power display is negative or not.And whether the power factor is between 0.9-0.95, and then check whether the incoming and outgoing wires of the current signal wire are connected reversely (that is, the current The incoming wire must be the same as the incoming wire end of the meter), and consistent with the wiring diagram on the meter.

Q:It cannot communicate with the host computer normally after the instrument powered on.

A:1. The voltage value between the communication output A and B of the measuring instrument should be between +(4.4-4.5)V .

2. Check whether the communication wiring method is correctly wired according to the wiring diagram (that is, the communication terminal A/B of the instrument must be connected with Corresponding to communication serial port A/B);

Contact Us

Jiangsu Acrel Electrical Manufacturing CO.,LTD: Contact nameTim
Chat Now; Phone86-1870-6168051; AddressJiangyin, Wuxi, Jiangsu

*Email
Please enter Your valid email address.
*To

Tim
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Multifunction Power Meter	Data Centre Monitoring	Temperature Monitoring	Smart Temperature And Hunidity Controller
Remote Terminal Unit	DIN Rail Energy Meter	IOT Wireless Energy Meter	PV/Solar Inverter Energy Meter
EV Charging Meter	DC Power Meter	Prepaid Energy Meter	Current Transformer
Hall Sensor	Protection Relay For Medium-Voltage Applications	Smart Motor Protector	Earth Leakage Relay
IT Power Distribution	Active Power Filter	Smart gateway	Ungrouped
Single phase din rail energy meter	Battery Monitoring device

Acrel ADL200 Din rail energy meter/single phase electric meter/1 phase energy meter CE-MID

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category

Product Tags: