Contact Platform Support
Help CenterFresnel Lens
Related Products
-
Optical Fresnel Lens D7002 For Smart Home SystemUS$ 0.1 - 1MOQ: 1 Piece -
HDPE Pir Motion Detector Lens S9006 for PIR Sensor ModuleUS$ 0.1 - 1MOQ: 1 Piece
-
Analog PIR SensorUS$ 0.1 - 1MOQ: 1 Piece
-
BQ404 Quad Elements Type PIR SensorUS$ 0.1 - 1MOQ: 1 Piece
-
Digital PIR SensorUS$ 0.1 - 1MOQ: 1 Piece
With our own R&D Center, Senba Sensor can do a lot of basic research, and develop our chinese pir sensor and other products with our unique technologies. Our manufacturing people pay a great deal of attention to the product quality, and our factory has become ISO9001 and ISO14001 certified.
Fresnel lens, also known as threaded lens, Fresnel lens is mostly made of polyolefin material, the surface of the lens is smooth, and the other side is filled with concentric circles from small to large. Its texture is designed to utilize the interference of light and to be based on relative sensitivity and acceptance angle requirements. The quality requirement of the lens is very high. A good lens must have a smooth surface, clear texture. Its thickness varies with the application and normally about 0.6 mm. The lens characteristics are wider surface, thinner and farther detection distance.
As one of the leading large fresnel lens suppliers, there are kinds of large fresnel lens for sales such as large plastic fresnel lens, plastic fresnel lens, etc.
There are two functions of Fresnel lens: one is the focusing effect; the other is to divide the detection area into several bright and dark areas, so that the moving object entering the detection area can produce the change of heat release on the PIR in the form of temperature change. It is what we called Infrared signal. We can say that fresnel lens help to strengthen the infrared signal and to make PIR work well.
The Fresnel lens is a convex lens that is equivalent to infrared and visible light in many cases, and the effect is better, but the cost is much lower than that of a conventional convex lens. It is often used in applications where accuracy is not critical, such as slide projectors, thin film magnifiers, infrared detectors, etc.
Normally the lens’ shapes are dome and flat. But these years as the smart home is more and more popular, different lens are needed to match with different controllers. Senba can help customers to design and mould the lens they want.
Send Inquiry to This Supplier
You May Also Like
-
Dual Elements Passive Infrared Sensor Used for Alarm System D203BUS$ 0.1 - 1MOQ: 1 Piece
-
Fast Response Light Dependent Resistor φ10 Series for Light SwitchUS$ 0.1 - 1MOQ: 1 Piece
-
High Quality Diam 7mm Light Resistor for Outdoor Solar Garden Light GL7537-1US$ 100 - 6000MOQ: 1000 Pieces
-
High Quality LDR Electric Circuit φ12 for Street Lamps From Senba ManufacturerUS$ 100 - 6000MOQ: 1000 Pieces
-
Diam 5MM Photoresistor φ5series for Led DimmerUS$ 100 - 6000MOQ: 1000 Pieces
-
Infrared Thermopile SensorUS$ 100 - 6000MOQ: 1000 Pieces
-
Intelligent PIR Motion Detector From Senba for Home Security BL612US$ 100 - 6000MOQ: 1000 Pieces
-
LDR PhotoresistorsUS$ 100 - 6000MOQ: 1000 Pieces
-
Digital Control Circuit Sensitive Element BS312US$ 100 - 6000MOQ: 1000 Pieces
-
Linear Light SensorUS$ 0.1 - 6MOQ: 1000 Pieces
