Ring Hammer Crusher for Coal
Ring Hammer Crusher for Coal
Ring Hammer Crusher for Coal Introduction:
Ring Hammer Crusher for Coal is mainly used for crushing all kinds of hard and abrasive weak material. Its material compressive strength of not more than 100MPa, moisture content of less than 15%. Widely used in power generation, coal, chemical and other industries moderate hardness and brittle materials for crushing, such as coal, coke, slag and so on.
Ring Hammer Crusher for Coal Technical Parameter:
| Model | Feed Size(mm) | Output Size(mm) | Capacity(t/h) | Rotor Speed(r/min) | Power(kw) | Weight(t) | Overall Size(mm) |
| PCH0402 | ≤200 | ≤30 | 8-12 | 960 | 5.5 | 0.8 | 810*890*560 |
| PCH0404 | ≤200 | ≤30 | 16-25 | 970 | 11 | 1.05 | 980*890*570 |
| PCH0604 | ≤200 | ≤30 | 22-33 | 970 | 15 | 1.43 | 1050*1270*1080 |
| PCH0606 | ≤200 | ≤30 | 30-60 | 980 | 30 | 1.17 | 1350*1270*1080 |
| PCH0808 | ≤200 | ≤30 | 10-105 | 740 | 45 | 3.6 | 1750*1620*1080 |
| PCH1010 | ≤300 | ≤30 | 160-200 | 740 | 90 | 6.1 | 2100*2000*1340 |
| PCH1016 | ≤300 | ≤30 | 300-350 | 740 | 155 | 9.2 | 2700*2000*1350 |
| PCH1216 | ≤350 | ≤30 | 620-800 | 740 | 355 | 15 | 4965*2500*1600 |
| PCH1322 | ≤400 | ≤30 | 800 | 595 | 400 | 24.9 | 6333*3295*2500 |
Send Inquiry to This Supplier
You May Also Like
-
Box Type Crusher BuildUS$ 3500 - 5500MOQ: 1 Set
-
Double Stage Crusher Run GravelUS$ 4000 - 5500MOQ: 1 Set
-
Small Gravel CrusherUS$ 3000 - 5500MOQ: 1 Set
-
Hammer Crusher in Cement PlantUS$ 3500 - 5500MOQ: 1 Set
-
River Gravel CrusherUS$ 4500 - 6500MOQ: 1 Set
-
River Cobble CrusherUS$ 3500 - 5500MOQ: 1 Set
-
Where to Find a Cobble CrusherUS$ 3500 - 4500MOQ: 1 Set
-
River Pebble CrusherUS$ 4500 - 6500MOQ: 1 Set
-
Hammer Type Coal CrusherUS$ 3500 - 4500MOQ: 1 Set
-
Rock Hammer MillUS$ 3500 - 4500MOQ: 1 Set




