Contact Platform Support
Help Center4 3/4" Iadc 127 Steel Tooth Tricone Drill Bit for Water Well Drilling
Related Products
-
New Steel Tooth Water Well Drilling 8 3/8 Inch Tricone BitUS$ 1030 - 1040MOQ: 1 Piece -
13 3/4" Iadc127 Tricone Three Cone Mill Tooth Drill BitUS$ 1950 - 1960MOQ: 1 Piece
-
9 5/8'' IADC127 Steel Tooth /milled Tooth Tricone Bit for Water Well DrillingUS$ 1120 - 1130MOQ: 1 Piece
-
4 3/4" Iadc 127 Steel Tooth Tricone Drill Bit for Water Well DrillingUS$ 410 - 415MOQ: 1 Piece
-
IADC 127 Milled Tooth Water Well Drilling 5 7/8 Inch Tricone Rock Drill BitUS$ 455 - 460MOQ: 1 Piece
Basical Parameter | |
Bit Size |
4 3/4"(120.6MM) |
IADC Code |
127 |
Tooth Type |
Steel /Milled Tooth |
Bearing Type |
Elastomer Sealed Bearing |
Connection |
2 7/8"API reg pin |
Rotary Speed(rpm) |
180~80 |
Weight on Bit(KN/MM) |
0.35~1.00 |
Formation |
low compressive strength,high drill-ability and soft formation,like shale,clay,salt rock and soft limestone,etc. |
4 3/4 inches is a regular size in water well drilling, it is working well with small capacity drilling rigs and widely used in the world.
Steel tooth tricone rock bit is also named milled tooth tricone rock bit could drill soft mudstone, even soft limestone, the cones are hard faced by tungsten carbide, the bearing is journal and locked by ball, high grade elastomer(rubber)-HNBR O-ring sealed bearing, grease compensating system lubricate the bearing , the working life is very long.
Application
Well Drilling Water Well Drilling
IADC |
Rock formation |
WOB (KN/mm) |
WOB (KN/mm) |
116/117 |
Low compressive strength, high drill-ability and extremely soft formation, like soft shale, clay, conglomerate etc. |
0.35~0.90 |
180~80 |
126/127 |
Low compressive strength, high drill-ability and soft formation, like shale, clay, soft limestone, salt rock, etc. |
0.35~1.00 |
180~80 |
136/137 |
Soft to medium soft with low compressive strength or soft with hard interlayer, like anhydrite, soft limestone,sandstone, etc. |
0.37~1.05 |
130~60 |
216/217 |
Medium hard formation with relatively high compressive strength and hard interlayer, like hard shale, sandstone, limestone, etc. |
0.5~1.20 |
100~50 |
Send Inquiry to This Supplier
You May Also Like
-
13 5/8 IADC217 Steel Tooth Rock Bit ManufacturerUS$ 1940 - 1950MOQ: 1 Piece
-
IADC127 9 7/8" Steel Tooth Tricone Drill Bit for Water Well DrillingUS$ 1370 - 1380MOQ: 1 Piece
-
8 3/8" Tricone Steel Tooth New Water Well Drilling BitUS$ 1035 - 1040MOQ: 1 Piece
-
6 1/4" Steel Tooth Tricone Drill BitUS$ 535 - 540MOQ: 1 Piece
-
20\'\' Steel Tooth Tricone Bit for Water WellUS$ 4640 - 4650MOQ: 1 Piece
-
5 3/4 Inch Mill Tooth Drilling Tricone Bit for Soft Drilling FormationUS$ 615 - 620MOQ: 1 Piece
-
8 1/2'' (215.9mm) Steel Tooth IADC 127 Water Drill BitUS$ 835 - 840MOQ: 1 Piece
-
12 1/4" (311.1mm) IADC127 Steel Tooth Tricone Bit/Milled Tooth BitUS$ 1485 - 1490MOQ: 1 Piece
-
7 1/2 Inch Milled Tooth Tricone Drill Bit With Water WellUS$ 665 - 670MOQ: 1 Piece
-
9 7/8" Steel Teeth /Milled Tooth Tricone Bit for Water Well DrillingUS$ 1340 - 1350MOQ: 1 Piece
