Contact Platform Support
Help Center
Home > Auto, Motorcycle Parts & Accessories > Auto Engine Structure > Other Auto Engine Structure > ACT Cng Carburetor Conversion Kit Cng Kit for Petrol Engine Sistema de Gas Vehicular Lpg Conversation Kit Gnv
ACT Cng Carburetor Conversion Kit Cng Kit for Petrol Engine Sistema de Gas Vehicular Lpg Conversation Kit Gnv
Negotiable
MOQ: 1 set (Price negotiable depending on order volume and customization)
Key Specifications
Get Latest Price
Business Type:
Other
Year Established:
1998
Annual Export Value:
US$10 Million - US$50 Million
Payment & Shipping
Payment Methods:
Port of Shipment:
China
Delivery Detail:
Delivery time depends on order quantity.
Related Products
-
LPG Switch for MP48 OBDII and MP48 GAS System Vehicle Car Switches for Lpg Cng Gas Conversion Kitskit Kits Lpg SwitchNegotiableMOQ: 1 -
Automatic CNG LPG Changeover Switch Kit to Conversione Auto MP48 OBD 2568D ECU GLP GNV Motorcycle Fuel Systems Ecu Lpg SwitchNegotiableMOQ: 1
-
Cng Gnv Sistema de Gas Vehicular Lpg Glp 4 Cyl Kit for Petrol Engine Sistema de Gas Sequential Vehicular KitNegotiableMOQ: 1
-
ACT Lpg Cng Automobile Fuel Filter Factory Manufacturer Oil Autogas Fuel Filter Diesel Engine FiltersNegotiableMOQ: 1
-
Chengdu ACT Cng Lpg CTF-3 Gas Cylinder Filling Valves Gnv Car Cylinder Gas Gas Conversion Kit Valve Cylinder ValvesNegotiableMOQ: 1
Products Description
ACT cng carburetor conversion kit cng kit for petrol engine sistema de gas vehicular lpg conversation kit gnv
Natural Gas for Vehicles (NGV) is a fuel for internal combustion engines that is basically composed of Methane gas and its use offers extraordinary advantages.
NGV, unlike gasoline, does not contain lead because of its high octane rating (120-130). As combustion is more complete, the contaminating effects of the exhaust gas emissions are reduced by approximately 80%. These gases are also less corrosive, thus increasing the duration of the exhaust system. NGV keeps the spark plugs clean, prolonging their use; it does not contaminate the oil, doubling the time required for oil changes and that of the filters; it improves lubrication because the cylinders are not washed by gasoline excess, thus avoiding premature wear in the motor.
In today’s world there are constant advances in all aspects that concern security in case of automobile accidents; in gasoline vehicles the fuel is transported in thin sheet metal tanks that are very fragile when impacted and can explode. CNG is stored in steel cylinders with 6 to 8 mm thick walls; this literally makes it the most resistant component of the vehicle. The steel fuel pipes are also more resistant than the gasoline ones; even if there were to be an accidental breakage or leak, instead of the dangerous gasoline spill on the ground underneath the vehicle, the very light NGV will rise rapidly and dissipate into the air.
Component :
The installation of the gas equipment comprises the following parts:
Product Name |
Recommended Products |
1. CNG carburetor reducer-180kw |
ACT-98 reducer |
2. Oil shutoff valve |
Oil shutoff valve |
3. Mixer |
#58/#63/#65/#68/#74/#78/#82 Mixer |
4. Manometer |
CB08/201C Maometer (5V or 12V)
|
5. Filling Vavle |
QF-T1H6/CTF-10/T2H/T2H-1/QF-T1H9/QF-T3H/ TES filling vavle |
6. Switch kits |
AS816/ ACT 722/ACT-EFC switch |
7. High pressure tube |
6m*6mm carbon steel/copper/stainless steel high pressure tube
|
8. Cylinder tank |
30-40-60-90-120 L CNG cylinder tank |
9. Rubber cap and belt |
Common rubber cap and 2. 5M belt |
10. CNG Casing |
Water pipe 7. 5*14*1500mm
Bellows 34.5*650mm
Single point trachea 19*27*800mm
|
11. Accessories bags |
CNG single point accessories bags |
Notice :
There are a few checks that need to be performed before the vehicle enters the installation workshop for conversion, to determine whether it is suitable for installation of the NGV equipment.
The structure of the vehicle must be inspected, to check if it is in a good state that allows adequate fitting of the supports of the various elements such as the NGV tank (s), the pressure regulator, the high-pressure pipe clamps, etc.
To make sure that the motor functions properly, check the following:
The ignition system: spark plugs, spark plug cables, contact points, condenser, ignition coil, ignition plate and distributor. The faulty state of any of these parts will cause a poor ignition spark, thus hindering the good functioning of the equipment.
The battery must provide 12 volts of power to the pressure regulator so that its electrovalve will open properly when the vehicle is operating on gas. The engine’s carburetion system must also work properly because even though a NGV system is being installed, the vehicle must be capable to operate in bi-fuel mode (gasoline/gas).
If the vehicle is not in good condition, the installation of the NGV system will not result in a satisfactory operation vehicle.
Send Inquiry to This Supplier
* Email
Want the best price?
Post an RFQ now!
Business Type
Other
Year Established
1998
Annual Export Value
US$10 Million - US$50 Million
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe
You May Also Like
-
5VL-H5510-00 Stator Assembly Stator Coil Motorcycle Engine Parts for YamahaNegotiableMOQ: 1
-
High Quality Cylinder Head Gasket Seal C3907177US$ 10 - 50MOQ: 10 Sets
-
Carbon Steel Stamping Processing Motorcycle PartUS$ 1 - 3MOQ: 1000 Kilograms
-
Carbon Fiber Color Engine Cover 125cc Engine 140cc Engine 150cc EngineNegotiableMOQ: 1
-
Lifan/Zongshen CG250 CylinderUS$ 29.34 - 30.74MOQ: 20 Pieces
-
Motorcycle Part of LADA VAZ2106/2121 Piston RingUS$ 1 - 8MOQ: 1000 Pieces
-
Factory Supply Auto Engine Bearing BushesUS$ 0.01 - 3MOQ: 500 Pieces
-
7701477517 Alternator Belt Kit for RenaultUS$ 9.7 - 11.2MOQ: 200 Sets
-
ValveNegotiableMOQ: 6 Pairs
-
Connecting Rod for JAC1025 CY4100NegotiableMOQ: 1 Piece
