Contact Platform Support
Help CenterGB 8410(Chinese Standard) Flammability Test to Motor Vehicle
Related Products
-
NFPA 130 American StandardUS$ 200 - 500MOQ: 1 Piece -
TB/T 3237 Chinese Fire Test Standard for Railway VehiclesUS$ 200 - 500MOQ: 1 Piece
-
EN 45545-2 New Fire Test to Railway VehiclesUS$ 200 - 550MOQ: 1 Piece
-
CASfire Fire Test Service to Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN 45545-2:2020 Fire Protection on Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials.
GB8410 - Scope:
This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials.
This Standard applies to the assessment of automotive interior materials.
As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials.
GB8410 - Technical requirements：
The flammability of interior materials must meet the following technical requirement:
The burning rate is not greater than 100 mm/min.
GB 8410 - Test method：
Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance.
GB 8410 - Relative Standard:
FMVSS 302 Flammability of Interior materials
SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method
TL1010: Flammability
ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
DIN 75200:Determination of burning behaviour of interior materials in motor vehicles
95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehicles”, and is intended to ensure that they meet fire safety standards
NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles
BMW N 60121.0: BMW standard
DBL 5307: Benz Standard
GM L-T06-302G-79: GE Standard
Mitsubishi ES-X60410: Oxygen Index
VW TL 1010: burning behaviour
Volvo STD 5031: burning behaviour
Web:
E-mail:info@casfire.cn
Send Inquiry to This Supplier
You May Also Like
-
CASfire Fire Test Service to Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN 45545-2:2020 Fire Protection on Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN 45545-2 Fire Protection of Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
FAR.25.853 Department of Transportation, Federal Aviation Administration Regulations for Compartment InteriorsUS$ 200 - 600MOQ: 1 Piece
-
NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail SystemsUS$ 200 - 600MOQ: 1 Piece
-
TB/T 3237 Chinese Fire Test Standard for Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
Flame Retardant Board BSS 7238 Boeing Standard Yishuo Aircraft Material Combustion Smoke Density TestUS$ 200 - 600MOQ: 1 Piece
-
Fire Test Service to Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
-
EN 45545-2 Fire Protection of Railway Vehicles - Part 2US$ 200 - 600MOQ: 1 Piece
-
EN 45545-2:2020 Fire Protection on Railway VehiclesUS$ 200 - 600MOQ: 1 Piece
