Contact Platform Support
Help Center32x78x110.5mm Tandem Bearings Twin Screw Extruder Gearboxes Bearing
Related Products
-
32x78x137mm Tandem Bearings Twin Screw Extruder Gearboxes BearingNegotiableMOQ: 1 Piece -
33x105x115mm Tandem Bearings Twin Screw Extruder Gearboxes BearingNegotiableMOQ: 1 Piece
-
33x105x150.5mm Tandem Bearings Twin Screw Extruder Gearboxes BearingNegotiableMOQ: 1 Piece
-
34x95x130mm Tandem Bearings Twin Screw Extruder Gearboxes BearingNegotiableMOQ: 1 Piece
-
334x95x163mm Tandem Bearings Twin Screw Extruder Gearboxes BearingNegotiableMOQ: 1 Piece
Tandem Thrust bearings are comprised of "stages" which include precision ground and matched thrust plates. These bearings also include compression sleeves separated by cylindrical roller assemblies. This design enables the Tandem Thrust bearings to provide a solution in a radial restricted envelope. The bearings are available in multiple stages, 2-8 to accommodate your design requirements. Depending on your preference, these bearings are available in a wide variety of sizes and options.
TandemThrust Bearings can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictional power. In addition, these bearings are moved by oil lubrication. Also thesetandem thrust bearings are used principally in gear boxes for single & twin screw extruders in the rubber and plastic industries.
| Model No. | Dimension(mm) | rows | Load rating（KN） | weight(Kg) | |||||||||
| new | old | d | D | H1 | H0 | H | H2 | d1 | d2 | Ca | Coa | ||
| M3CT420A | 32 | 32 | 4 | 6 | 3 | 18 | 35 | 0.061 | |||||
| M3CT420EA | T3AR420EA | 4 | 43.5 | 9 | 32 | 32 | 4 | 6 | 3 | 18 | 35 | 0.053 | |
| M5CT420A | 6 | 5 | 26.7 | 58.3 | 0.093 | ||||||||
| M6CT420A | 77.5 | 10 | 65 | 65 | 4 | 7 | 6 | 30.8 | 70 | 0.115 | |||
| M6CT424X1A | 62 | 60 | 4 | 6 | 6 | 48.8 | 84.5 | 0.168 | |||||
Extruders are used in the processi
ng of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxesExtruders are used in the processing of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxes
Send Inquiry to This Supplier
You May Also Like
-
34x95x196mm Low Price Tandem Thrust BearingNegotiableMOQ: 1 Piece
-
34x95x262mm Low Price Tandem Thrust Bearing Multistage Bearing in StockNegotiableMOQ: 1 Piece
-
36x120x197mm Multi-stage Cylindrical Roller BearingNegotiableMOQ: 1 Piece
-
38x150x213mm Multi-stage Cylindrical Roller Thrust Bearings SchaefflerNegotiableMOQ: 1 Piece
-
38x160x360mm Tandem Bearings Ina Made in ChinaNegotiableMOQ: 1 Piece
-
40x110x123mm Tandem Bearings Ina Made in ChinaNegotiableMOQ: 1 Piece
-
40x110x164mm Tandem Bearings Ina Made in ChinaNegotiableMOQ: 1 Piece
-
40x127x177mm Tandem Thrust Bearing FactoryNegotiableMOQ: 1 Piece
-
89x190.5x107.95mm Low Price Large Gearbox Tandem BearingNegotiableMOQ: 1 Piece
-
145x385x233mm Two-stage Cylindrical Roller Thrust BearingNegotiableMOQ: 1 Piece
