Contact Platform Support
Help CenterM3CT2468A Tandem Thrust Bearing With Shaft Made in China
Related Products
-
T3AR2468A Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece -
M5CT2468A Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
T5AR2468A Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
M3CT2468A1a Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
T3AR2468A1a Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
Tandem Thrust bearings are comprised of "stages" which include precision ground and matched thrust plates. These bearings also include compression sleeves separated by cylindrical roller assemblies. This design enables the Tandem Thrust bearings to provide a solution in a radial restricted envelope. The bearings are available in multiple stages, 2-8 to accommodate your design requirements. Depending on your preference, these bearings are available in a wide variety of sizes and options.
TandemThrust Bearings can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictional power. In addition, these bearings are moved by oil lubrication. Also thesetandem thrust bearings are used principally in gear boxes for single & twin screw extruders in the rubber and plastic industries.
| Model No. | Dimension(mm) | rows | Load rating（KN） | weight(Kg) | |||||||||
| new | old | d | D | H1 | H0 | H | H2 | d1 | d2 | Ca | Coa | ||
| M5CT1037EA | 19 | 99 | 98 | 10 | 10 | 5 | 91.3 | 275 | 0.57 | ||||
| M5CT1242EA | 26 | 104.6 | 103.6 | 12 | 12 | 5 | 112 | 356 | 0.9 | ||||
| M5CT1242A | 26 | 104.6 | 103.6 | 12 | 12 | 5 | 111.7 | 356 | 0.925 | ||||
| M6CT1242EA | 26 | 125.7 | 124.7 | 12 | 12 | 6 | 134 | 427.2 | 1.07 | ||||
| M7CT18100A | 25 | 266 | 266 | 50 | 15 | 7 | 1050 | 4010 | 6.83 | ||||
| M5CT2262A | T5AR2262A | 22 | 144 | 30 | 110 | 110 | 22 | 22 | 5 | 270 | 896 | 2.2 | |
Extruders are used in the processi
ng of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxesExtruders are used in the processing of plastics in powder or granulate form, mixed with stabilisers, parting agents and any colourings and fillers; they are conveyed, compacted, degassed, homogenised and finally pressed through a die into profiled tooling. In order to apply the necessary forces correctly, very high demands are placed on the extruder gearboxes
Send Inquiry to This Supplier
You May Also Like
-
M3CT2468A1 Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
T3AR2468A1 Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
M7CT25120A Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
T7AR25120A Tandem Thrust Bearing With Shaft Made in ChinaNegotiableMOQ: 1 Piece
-
M4CT2866A Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
-
T4AR2866A Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
-
M4CT2866A+ Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
-
T4AR2866A+ Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
-
M5CT2876A Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
-
T5AR2876A Tandem Thrust Bearing With Shaft FactoryNegotiableMOQ: 1 Piece
