MAHLE oil filter hydraulic PI3111SMX10

Product introduction：

MAHLE filter element is widely used in hydraulic system to remove the impurities in the oil and reduce the hydraulic parts surface friction then improve the system reliability and keep the hydraulic and lubricant system reliable and high efficiency operation.

Typical model codes:

Technical parameter

1.Working medium: general hydraulic oil, phosphate grease hydraulic oil, emulsion, water glycol

2.Material: glass fiber filter paper - BN stainless steel woven mesh - W wood pulp filter

3.paper- P stainless steel sintered mesh – V

4.Filtration accuracy: 1 μ ~ 100 μ

5.Working pressure: 21bar-210bar

6.Working temperature: - 30 ℃～ + 110 ℃

7.Sealing material: fluorine rubber ring, butyl rubber

8.Structural strength: 1.0MPa, 2.0MPa, 16.0mpa, 21.0mpa

Application fields:

1. Petrochemical: separation and recovery of products and intermediate products in the process of oil refining and chemical production, oil field injection well water and natural gas particle removal and filtration and corresponding hydraulic pump station.

2. Metallurgy: used for filtration of hydraulic system of rolling mill and continuous caster, filtration of various lubricating equipment and provision of corresponding hydraulic pump station

3. Textile: purification and uniform filtration of polyester melt in drawing process, protective filtration of air compressor, oil and water removal of compressed gas.

4. Electronics and pharmacy: pretreatment and filtration of reverse osmosis water and deionized water, pretreatment and filtration of detergent and glucose.

5. Thermal power and nuclear power: gas turbine, boiler lubrication system, speed control system, bypass control system, oil purification, feed water pump, fan and dust removal system purification.