Contact Platform Support
Help CenterToughened Glass Disc Suspension Insulator U50BSP for Uzbekistan
Related Products
-
Toughened Glass Disc Suspension Insulator U160BSP for UzbekistanNegotiableMOQ: 1 -
Pay Later China High Quality Glass Insulator LXAP-70/120NegotiableMOQ: 1
-
Aluminium Roofing Sheet Plate Alloy AA-1100 H-14 TemperNegotiableMOQ: 1
-
Export 24KV Pin Type Glass Insulator 14KNNegotiableMOQ: 1
-
Strict Standard Toughed Glass Insulator Pin TypeNegotiableMOQ: 1
toughened glass disc suspension insulator U50BSP for Uzbekistan
1.Material: Glass
2.Certificate: ISO 9001
3.Delivery time: 20-30 days
4.MOQ: 1000 pcs
Insulators are commonly used as a flexible coating on electric wire and cable. Since air is an insulator, in principle no other substance is needed to keep power where it should be. High-voltage power lines commonly use just air, since a solid (e.g., plastic) coating is impractical. However, wires which touch each other will produce cross connections, short circuits, and fire hazards. In coaxial cable the center conductor must be supported exactly in the middle of the hollow shield in order to prevent EM wave reflections. Finally, wires which expose voltages higher than 60V can cause human shock and electrocution hazards. Insulating coatings help to prevent all of these problems.
Some wires have a mechanical covering which has no voltage rating;e.g.: service-drop, welding, doorbell, thermostat. An insulated wire or cable has a voltage rating and a maximum conductor temperature rating. It may not have an ampacity (current-carrying capacity) rating, since this is dependent upon the surrounding environment (e.g. ambient temperature).
In electronic systems, printed circuit boards are made from epoxy plastic and fibreglass. The nonconductive boards support layers of copper foil conductors. In electronic devices, the tiny and delicate active components are embedded within nonconductive epoxy or phenolic plastics, or within baked glass or ceramic coatings.
In microelectronic components such as transistors and ICs, the silicon material is normally a conductor because of doping, but it can easily be selectively transformed into a good insulator by the application of heat and oxygen. Oxidized silicon is quartz, i.e. silicon dioxide, the primary component of glass.
In high voltage systems containing transformers and capacitors, liquid insulator oil is the typical method used for preventing arcs. The oil replaces the air in any spaces which must support significant voltage without electrical breakdown. Other methods of insulating high voltage systems are ceramic or glass wire holders, gas, vacuum, and simply placing the wires with a large separation, using the air as insulation.
Send Inquiry to This Supplier
You May Also Like
-
Self-fusing Electrical Silicone Rubber Hose Leak Waterproof High Pressure Plumbing Repair Tape Silicone Self Fusing TapeNegotiableMOQ: 1 Roll
-
Insulating TapeUS$ 0.27 - 0.69MOQ: 1000 Pieces
-
Air Conditioner Refrigeration HVAC Electrical Insulation Tape Pvc Insulating Tape PVC Insulation TapeNegotiableMOQ: 1
-
Silicon Rubber Pad Thickness 1.0,silicon Pad for SublimationUS$ 5 - 50MOQ: 10 Pieces
-
Polymeric Insulator Fittings Y Style FittingUS$ 3 - 5MOQ: 1000 Pieces
-
Polyimide TapeNegotiableMOQ: 100 Rolls
-
Fiberglass ProfileUS$ 0.2 - 19MOQ: 3000 Meters
-
Wool Noil / Wool Waste / NoilUS$ 2.7 - 2.8MOQ: 15 Tons
-
SL-4050F Screw In Bus Bar Support Plastic Overhead Line InsulatorUS$ 0.1 - 5MOQ: 100 Pieces
-
Insulation Tape (NPTC-PVC)NegotiableMOQ: 1000 Pieces
