Home > Products > sstubecn2021 > Bright Annealed Tubes
Bright Annealed Tubes
- T/T L/C
You May Like
Product Details
| Place of Origin | China |
Product Description
Product description
Bright Annealed Tube Description
Bright annealed stainless steel tube is a kind of high precision steel tube material after finishing or cold rolling. Due to the advantages of no oxide layer both inside and outside wall, no leakage under high pressure, high precision, high finish degree, no deformation and flaring, no cracks flattening, precision bright annealed tube is mainly used to produce pneumatic or hydraulic components, such as air cylinder or gas cylinder. It can be seamless tube, and also welded pipe. The chemical components of precision bright annealed tube are C, Si, Mn, S, P, Cr.
Bright annealed stainless steel tube can be used for industries like automobile, and mechanical parts which have higher requirements for steel pipe precision and surface finish. Bright annealed stainless steel tubes are not only for higher precision and finish requirements, its tolerance can be maintained in 0.02-0.08mm, so many mechanical processing users gradually replace seamless steel tube or round steel with precision bright annealed tube in order to save labor, material, and time.
The traditional annealing approach is performed in a so referred to as open furnace, where the atmospheric oxygen reasons scaling of the heat treated materials, which makes the surface rough. HUASHANG STEEL has developed a one of a kind bright annealing process, the heat treatment is carried out in a so-called closed furnace. The warmth handled materials is covered by means of an inter-fuel atmosphere, which ensures the oxygen cant enter the furnace or come in to contact with the substances and react to shape scale on or tarnish the materials. The surface end is clean, bright and precision, which is a top-notch beginning point for a similar system, like electro-polishing and mechanical polishing.
Especially for the tube with size greater than 12 meters, the ordinary pickling tube is very hard to clean the internal surface, however, with the bright annealing method, our tubing is much cleaner, smoother on both inner and outer surface. We use bright annealing method, the temperature of the furnace can reach greater than 1350℃, and the tolerance for the putting and real temperature can be controlled Within ±2℃, which is not possible for the regular annealing.
To ensure the quality, all tubes are done 100% PMI, 100% Hydraulic test, 100% inner cleaned by sponge,100% dimension test, and 100% surface test. What is more, our quality of precision drawn tubing is same to precision rolling but has more advantage on price? We are using the advanced cold drawn technology from Japan and Korean, making the close dimension controls. Huashang steel tubing used for instrument tubing, chromatography tubing, hydraulic tubing, high-pressure tubing, cleaned tubing, multi-core tubing.
Type Of Tube: Welded tubing and Seamless Tubing
Straight Tubes Bright Annealed Tube Advantages
1. Superior Surface Finish
2. Better Mechanical Property
3. More Precise Dimension
Bright Annealed Tubes Sizes
welded tubing size range
OD: 0.19mm--44.5mm, T.W: 0.08mm--3.81mm
Length: CUT TO LENGTH
The seamless straight tubing & bright annealed tubing sizes:
OD(mm)*T.W (mm) |
4.76×0.51/4.76×0.71/4.76×0.89/4.76×1.24 |
6×1/6×1.5 |
6.35×0.51/6.35×0.71/6.35×0.89/6.35×1.24/6.35×1.65 |
7.94×0.71/7.94×0.89/7.94×1.24/7.94×1.65 |
9.53×0.71/9.53×0.89/9.53×1.24/9.53×1.65 |
10×1/10×1.5/10×2 |
12×1/12×1.5 |
12.7×0.71/12.7×0.89/12.7*1.24/12.7×1.65 |
15.88×0.71/15.88×0.89/15.88×1.24/15.88×1.65/15.88×2.11 |
16×1/16×1.5/16×2 |
19.05×1/19.05×1.24/19.05×1.65/19.05×2.11 |
25.4×1.24/25.4×1.65/25.4×2.11/25.4×2.54 |
31.8×1.24/31.8×1.65/31.8×2.11/31.8×2.54 |
38.1×1.24/38.1×1.65/38.1×2.11/38.1×2.54/38.1×3.05 |
Bright Annealed Tubes Materials
Austenitic Stainless Steel:
TP304, TP304L, TP304H, TP304LN, TP316/TP316L, TP316H, TP316Ti, TP316LN, TP321, TP321H,TP317, TP317L, TP347, TP347H, TP310S, TP310H, TP904L, 254Mo. S30432, S31042, N08367
Duplex & Super Duplex Steel: S31500, S32101, S32003, S32304, S31803, S32205, S32750, S32760
Nickel Alloy Steel:
N06600, N06601, N06625, N07718, N08800, N08825, N10276, N04400, N05500, N02200, N02201, N08028, N08810, N08811, N08020, N10624, N10629, N10675
Bright Annealed Tubes Standard
ASTM A789, ASME SA789, EN10216-5, ASTM B163, ASTM B167, ASME SB163, ASME SB167, ASTM B668, ASME SB668, ASTM A269, ASME SB677, ASTM A213, ASME SA213, ASME SA269, ASMT A270, ASTM B622, ASTM B516
Heat Treatment: Bright Annealed
NDT: Eddy Current or Hydraulic test or UT
Chemical Composition of Nickel Alloy, Duplex steel & Austenitic Steel
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Fe | Al | Co | Zr | Nb | Tu | Va |
Max | Max | Max | Max | Max | Max | Max | Max | Max | Max | |||||||||
Nickel Alloy | ||||||||||||||||||
Inconel 600/No6600/2.4816 | 0.15 | 0.5 | 1 | 0.015 | 14-17 | ≧72 | 0.5 | 6.0-10.0 | ||||||||||
Inconel 600/No6601/2.4851 | 0.1 | 0.5 | 1.5 | 0.015 | 21-25 | 58-63 | 1 | 1.0-1.7 | ||||||||||
Inconel 690/No6690 | 0.05 | 0.5 | 0.5 | 0.015 | 27-31 | 58 | 0.5 | 7.0-11.0 | ||||||||||
Inconel 625/No6625/2.4856 | 0.1 | 0.5 | 0.5 | 0.015 | 0.015 | 20-23 | ≧58 | 8.0-10.0 | ≦0.4 | 5 | ≦0.4 | 3.15-4.15 | ||||||
Inconel 718/No7718/2.4668 | 0.08 | 0.35 | 0.35 | 0.015 | 0.015 | 17-21 | 50-55 | 2.8-3.3 | 0.65-1.15 | 0.006 | 0.3 | Remainder | 0.2-0.8 | 4.75-5.5 | ||||
Incoloy 800/No8800/1.4876 | 0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.15-0.6 | 0.75 | ≧39.5 | 0.15-0.6 | ||||||||
Incoloy 800H/No8810/1.4958 | 0.05-0.1 | 1 | 1.5 | 0.015 | 19-23 | 30-35 | 0.6-1.2 | 0.75 | ≧39.5 | 0.15-0.6 | 1 | |||||||
Incoloy 825/No8825/2.4858 | 0.05 | 0.5 | 1 | 0.03 | 19.5-23.5 | 38-46 | 2.5-3.5 | 1.5-3 | ≧22 | 0.2 | ||||||||
C-276/No10276/2.4819 | 0.01 | 0.08 | 1 | 0.04 | 0.03 | 14.5-16.5 | Balance | 15.0-17.0 | 4.0-7.0 | 2.5 | 3-4.5 | 0.35 | ||||||
Monel 400/No4400/2.4360 | 0.3 | 0.5 | 2 | 0.024 | ≧63 | 28-34 | 2.5 | |||||||||||
Monel K-500/No5500 | 0.18 | 0.5 | 1.5 | 0.01 | 63 | 0.35-0.85 | 27-33 | 2 | 2.3-3.15 | |||||||||
Alloy 20/No8020/2.4660 | 0.07 | 1 | 2 | 0.045 | 0.035 | 19-21 | 32-38 | 2.0-3.0 | 3.0-4.0 | Balance | 8C-1 | |||||||
Alloy 28/No8028 | 0.03 | 1 | 2.5 | 0.03 | 0.03 | 26-28 | 30-34 | 3.0-4.0 | 0.6-1.4 | Remainder | ||||||||
Duplex Steel | ||||||||||||||||||
S31803/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 21-23 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | |||||||||
S32205/1.4462 | 0.03 | 1 | 2 | 0.03 | 0.02 | 22-23 | 4.5-6.5 | 3.0-3.5 | 0.14-0.2 | |||||||||
S32750/1.4410 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24-26 | 6.0-8.0 | 3.0-3.5 | 0.24-0.32 | 0.5 | ||||||||
S32760/1.4501 | 0.05 | 1 | 1 | 0.03 | 0.01 | 24-26 | 6.0-8.0 | 3.0-4.0 | 0.2-0.3 | 0.5-1.0 | ||||||||
Austenitic | ||||||||||||||||||
304/1.4301 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8-10.5 | |||||||||||
304L/1.4307 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-12.0 | |||||||||||
304H/1.4948 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 18-20 | 8.0-11.0 | |||||||||||
316/1.4401 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 11.0-14.0 | 2.0-3.0 | ||||||||||
316L/1.4404 | 0.035 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | ||||||||||
316H/1.4919 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.1 | |||||||||
316Ti/1.4571 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16-18 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) | |||||||||
321/1.4541 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | 0.7>5x(C+N) | ||||||||||
321H/1.4878 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | H | ||||||||||
317/1.4449 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-14.0 | 3.0-4.0 | ||||||||||
317L/1.4438 | 0.035 | 1 | 2 | 0.045 | 0.03 | 18-20 | 11.0-15.0 | 3.0-4.0 | ||||||||||
347/1.4550 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-12.0 | |||||||||||
347H/1.4912 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 17-19 | 9.0-13.0 | |||||||||||
310S/1.4845 | 0.08 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | 0.11 | ||||||||||
310H/1.4845 | 0.04-0.1 | 1 | 2 | 0.045 | 0.03 | 24-26 | 19.0-22.0 | |||||||||||
N08904(904L)/1.4539 | 0.02 | 1 | 2 | 0.045 | 0.03 | 19-23 | 23.0-28.0 | 4.0-5.0 | 0.1 | 1.0-2.0 | ||||||||
S31254(254Mo)/1.4547 | 0.02 | 0.8 | 1 | 0.03 | 0.01 | 19.5-20.5 | 17.5-18.5 | 6.0-6.5 | 0.18-0.22 | 0.5-1.0 | ||||||||
WENZHOU HUASHANG STEEL CO., LTD is a professional stainless steel buttweld fittings manufacturer. We provide Stainless Steel Tubing, Butt Weld Fittings, bright annealed stainless steel tubing, stainless steel bright annealed tube, annealed stainless steel tubing and so on. Want to know about bright annealing advantages? Please contact us.
Contact Us
- Wenzhou Huashang Steel Co.,ltd
- Contact nameLucy Zhang Chat Now
- Phone86-0577-86383608
- AddressLongwan District, Wenzhou, Zhejiang
Product Categories
| sstubecn | sstubecn2021 | sstubecn0001 | 20220224 |
New Products
Popular Searches
- stainless steel
- steel pipe
- carbon steel
- steel tube
- seamless pipe
- petroleum equipment
- steel tubing
- piping
- pipe line
- oil casing
- oil pipe
- casing pipe
- api 5ct
- octg
- pup joint
- steel pipe
- seamless steel pipe
- stainless steel pipe
- stainless steel tube
- stainless steel tubing
- seamless stainless steel pipe
- seamless tube
- steel pipe tube
- stainless steel welded tube
- seamless stainless steel tube
- welded stainless steel tube
- hydraulic cylinder stainless
- mirror polish tube
- precision tube
- bright annealed tubing
Recommended Products
- Quick Assembled Convenient Thermal Insulation Prefab House Casa Fabricada for Office and Hotels
- Quick Assembled Convenient Thermal Insulation Prefab House Casa Fabricada
- 20/30/40 Foot Twin Wing Expansion Box Villa With 1/2/3 Bedrooms, 1 Living Room, 1 Kitchen, and 1 Bathroom
- 15 Foot Double Wing Expansion Box 570 Expansion Box for Foreign Trade Export Folding Box
- Quick Assembled Convenient Thermal Insulation Prefab House With Bathroom, Circuit Sets, Flooring, Basin and Toilet
- Quick Assembled Convenient Thermal Insulation Prefab House Window Office House and Outdoor Prefab Store
- Quick Assembled Convenient Thermal Insulation Prefab House L5.95*W3*H2.8m With Customized Inner Decoration
- Quickly Assemble and Expand the Folding Room Container Room
- Container Room Quickly Assemble and Expand the Folding Room
- Double Wing Folding Expansion Room Container Room
- Quick Assembled Convenient Thermal Insulation Prefab House L5.95*W3*H2.8m With Different Colour and Inner Decorations
- Quick Assembled Convenient Thermal Insulation Prefab House L5.95*W3*H2.8m With Customized Flooring and Bathroom
Find Similar Products By Category
- Construction & Decoration > Prefabricated Building > Prefabricated Hotel
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Lucy Zhang
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile

Coiled Tubing
Hexagon Steel Tubing
Equal Tee
Reducing Tee
Stub End
Tube Caps
FORGED FLANGES
Blind Flanges
Forged Rings
Lap Joint Flanges
Aerospace Tubing
Boiler Tubes
Bright Annealed Tubes
Coiled Tubing
Hexagon Steel Tubing
Forged Flanges
Long Neck Flanges
Loose Flanges
Reducing Flanges
Socket Weld Flanges
Spectacle Blind Flanges
Weld Neck Flanges
STAINLESS STEEL TUBING