Contact Platform Support
Help CenterCE12804A-B02 Huawei CE12800 Series Data Center Switch CE12804 AC Bundle2 AC Assembly Chassis
Related Products
-
PWR-C1-1100WAC Cisco Power Supply for Cisco 3850 Series Switches 1100W AC Config 1NegotiableMOQ: 1 Unit -
PWR-C1-350WAC Cisco 3850 Series Power Supply PWR-C1-350WAC 350W AC Config 1 Power SupplyNegotiableMOQ: 1 Unit
-
PWR-C6-600WAC Catalyst 9000 Switch Power Supply Config 6 Hot-plug 600 WattNegotiableMOQ: 1 Unit
-
PWR-C2-1025WAC Catalyst 3650 Series Spare Power Supply 1025W AC Config 2NegotiableMOQ: 1 Unit
-
PWR-C2-250WAC Catalyst 3650 Series Spare Power Supply 250W AC Config 2 Power Supply SpareNegotiableMOQ: 1 Unit
CE12804A-B02 Overview
CE12804A-B02 is CE12804 AC Bundle2 AC Assembly Chassis, 2*MPUA, 5*SFU04B, 3*PAC-2700WA.
| CE12804A-B02 Specifications | |
Switching Capacity |
45/ |
Forwarding Rate |
17,280 |
Service Slots |
4 |
Switching Fabric |
6 |
Fabric Architecture |
Clos architecture, cell switching, VoQ, and distributed large buffer |
Airflow Design |
Strict front-to-back |
Device Virtualization |
Virtual System (VS) |
Cluster Switch System (CSS)2 | |
Super Virtual Fabric (SVF)3 | |
Network Virtualization |
M-LAG |
TRILL | |
VxLAN routing and bridging | |
EVPN | |
QinQ in VXLAN | |
VM Awareness |
Agile Controller |
Network Convergence |
FCoE |
DCBX, PFC, and ETS | |
Data Center Interconnect |
BGP-EVPN |
Ethernet Virtual Network (EVN) for inter-DC Layer 2 network interconnections | |
Programmability |
OpenFlow |
ENP programming | |
OPS programming | |
Puppet, Ansible, and OVSDB plug-ins released on open source websites | |
Linux container for open source and customization programming | |
Traffic Analysis |
NetStream |
Hardware-based sFlow | |
VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
MAC Address |
Dynamic learning and aging of MAC addresses |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP |
IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ | |
IP packet fragmentation and reassembling | |
IPv6 |
IPv6 over VXLAN |
IPv6 over IPv4 | |
IPv6 Neighbor Discovery (ND) | |
Path MTU Discovery (PMTU) | |
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
Multicast |
IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping | |
IGMP proxy | |
Fast leave of multicast member interfaces | |
Multicast traffic suppression | |
Multicast VLAN | |
MPLS |
Basic MPLS functions |
MPLS VPN/VPLS/VPLS over GRE | |
Reliability |
Link Aggregation Control Protocol (LACP) |
STP, RSTP, VBST, and MSTP | |
BPDU protection, root protection, and loop protection | |
Smart Link and multi-instance | |
Device Link Detection Protocol (DLDP) | |
Ethernet Ring Protection Switching (ERPS, G.8032) | |
Hardware-based Bi-directional Forwarding Detection (BFD) | |
VRRP, VRRP load balancing, and BFD for VRRP | |
BFD for BGP/IS-IS/OSPF/Static route | |
In-Service Software Upgrade (ISSU) | |
Segment Routing (SR) | |
QoS |
Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information |
Actions include ACL, CAR, and re-marking | |
Queue scheduling modes such as PQ, WFQ, and PQ + WRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
O&M |
IEEE 1588v2 |
Packet Conservation Algorithm for Internet (iPCA) | |
Dynamic Load Balancing (DLB) | |
Dynamic Packet Prioritization (DPP) | |
Network-wide path detection | |
Microsecond-level buffer detection | |
Configuration |
Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 | |
File upload and download through FTP and TFTP | |
BootROM upgrade and remote upgrade | |
Hot patches | |
User operation logs | |
Zero-Touch Provisioning (ZTP) | |
Security |
802.1x authentication |
RADIUS and HWTACACS authentication for login users | |
Command line authority control based on user levels, preventing unauthorized users from using commands | |
Defense against MAC address attacks, broadcast storms, and heavy-traffic attacks | |
Ping and traceroute | |
Remote Network Monitoring (RMON) | |
Dimensions |
442 x |
Chassis Weight (empty) |
(242 lb) |
Operating Voltage |
AC: 90V to 290V |
Max. Power Supply |
6,000W |
Send Inquiry to This Supplier
You May Also Like
-
PWR-4450-AC ISR Router Power Supply 450W AC Power Supply for Cisco ISR 4450NegotiableMOQ: 1 Unit
-
PWR-C2-640WAC Catalyst 3650 Series Spare Power Supply 640W AC Config 2 Power Supply SpareNegotiableMOQ: 1 Unit
-
PWR-C1-715WAC Cisco Power Supply for Cisco 3850 Series Switches 715W AC Config 1 Power SupplyNegotiableMOQ: 1 Unit
-
PWR-C5-600WAC Catalyst 9200 Power Supply 600W AC Config 5NegotiableMOQ: 1 Unit
-
PWR-C6-125WAC Catalyst 9000 Switch Power Supply 125W AC Config 6NegotiableMOQ: 1 Unit
-
PWR-C4-950WDC-R Catalyst 9500 Power Supply 950W DC Config 4 Power Supply Front to Back CoolingNegotiableMOQ: 1 Unit
-
PWR-C4-950WAC-R Catalyst 9500 Power Supply 950W AC Config 4 Power Supply Front to Back CoolingNegotiableMOQ: 1 Unit
-
PWR-C5-125WAC Catalyst 9200 Power Supply 125W AC Config 5 Power SupplyNegotiableMOQ: 1 Unit
-
PWR-C45-1300ACV Cisco Catalyst 4500 PoE Enabled Catalyst 4500 1300W AC Power SupplyNegotiableMOQ: 1 Unit
-
PWR-3900-AC Cisco 3902 Series Power Supply Cisco 3925/3945 AC Power SupplyNegotiableMOQ: 1 Unit
