Indentation hardness tester foam indentation tester foam indentation test machine

Summary

Sponge indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, polymer materials, compression, bending, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ISO, ASTM, JIS, EN and other standards for the preparation, to automatically strike the biggest test, fracture strength, yield strength, tensile strength, compressive strength, flexural strength, elastic modulus, elongation , constant elongation stress, elongation and other parameters given stress.

Test Principle

The sample is placed between the upper and lower platen, the pressure plate at a predetermined speed compression specimens down to a certain size when national standards concavity A method (B method, C Act) as required, on which the load cell to sense the pressure back to the computer processing and display, so the measured pressure sponge, foam and other materials such as depression sample hardness.

Standard

GB/T10807-89;ISO 2439-1980;JISK6401;ASTM D3574;AS 2282.8 Method A-IFD Test.

Specifications

Main configuration -Sponge indentation fatigue tester

1) PLC inovance

2) Touch screen kunlun tongtai (7 inches)

3) Force value sensor Germany tycos

4) Japan servo motor

5) Electric parts omron

6) Import brand of reducer

7) Ball screw Taiwan