Accurate measurement of liquid density meter / densimeter electromagnetic force sensor

The main features of liquid densitometer / liquid densitometer are as follows:

1. Like the similar instruments imported from Europe and America, the weighing technology based on the principle of high-precision electromagnetic force balance has the characteristics of high sensitivity, accurate weighing and good repeatability (at present, most of the devices on the market are simple devices with strain gauge technology sensors, except for low cost, other technical performances are not at the same level, which is far from satisfactory);

2. The sample table can be raised or lowered, and the standard volume part for density measurement can be slowly immersed in the sample to be measured, which can effectively reduce the measurement error;

3. Automatic display of measurement results without manual conversion;

4. There are many kinds of standard parts for liquid density test, which can meet the test requirements of viscous liquid and corrosive liquid.

5. Thermostatic cup and thermostatic bath can be selected to keep the temperature of the sample accurately.

6. STN wide viewing angle backlight LCD display;

7. Automatic zero tracking;

8. Dynamic temperature compensation;

9. Automatic range correction;

10. Full range tare removal;

11. Automatic fault diagnosis;

12. Overload alarm;

13. Overload protection;

14. RS232 interface output

Standard configuration is 5cm stainless steel standard volume parts;

If you need to measure the corrosive liquid of strong acid and alkali, you can choose 5 cubic centimeter glass plus platinum wire standard volume parts

Liquid densitometer / liquid densitometer meets the following standards:

1. GB / T 611-2006 general method for Density Determination of chemical reagents

2. GB / T 11540-2008 determination of relative density of spices

3. Determination of specific gravity of plasticizer (Wechsler balance method)

4. GB / T 5009.2-2003 determination of relative density of food

5. JJG 171-2004 verification regulation of liquid relative density balance

6. Gb4472-84 general rules for testing density and relative density of chemical products

7. Gb-t5526-1985 method for determination of specific gravity of vegetable oils

8. Jb-t 611-2006 general method for density test of chemical reagents

And other relevant standards.